HP ProBook 650 G4

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • Mahesa09
    replied
    hello sir can you help me hp 650 g4. and i problem
    hp endpoin security controller problem.
    give me fix the problem SN 5CG9164QM3
    Badcaps Electronics Repair Forum & Schematic Search

    Leave a comment:


  • x44n
    replied
    Hello
    need clear bios and ec, many faults
    CHROMIA 6050A2930001-MB-A01(A1)
    ​Serial: 5CG9111780
    ProdID: 3UP57EA#ABD
    THANK YOU in advance
    Attached Files

    Leave a comment:


  • nefaa
    replied
    plz dump for my corrupted bios CHROMIA-6050A2390001-MB-A01(A1)
    Serial: 5CG93684V6
    ProdID: 2GN02AV
    thx in advance
    Attached Files

    Leave a comment:


  • bykanovm
    replied
    I corrected the error, flashed my original EC, and 32MB BIOS from hoaca388, for which many thanks to him!

    Leave a comment:


  • bykanovm
    replied
    Originally posted by hoaca388

    HP ProBook 650 G4 Base Model Notebook PC
    Thanks, the BIOS works.


    But when turned on, it shows the message "HP Endpoint Security Controller Problem"
    I don’t know the password on the old original BIOS, the laptop wouldn’t turn on.​

    Leave a comment:


  • hoaca388
    replied
    Originally posted by bykanovm
    Help me with BIOS on 650 G4 motherboard CHROMIA-6050A2930001-MB-A01(A1)
    SN 5CG91625N3
    In my old one there is a black screen and gradually the fan turns at maximum speed
    HP ProBook 650 G4 Base Model Notebook PC
    Attached Files
    Last edited by hoaca388; 03-29-2024, 02:50 AM.

    Leave a comment:


  • bykanovm
    replied
    I'll add to my post above. I flashed the laptop with a set of EC and MAIN bios from post No. 6. The laptop began to turn on, which indicates that the hardware is completely working. But when you turn it on, the fan starts turning at full speed, then it stops and works normally. It also takes a long time to turn on, the screen is dark for about 40 seconds. This is understandable, since the BIOS is from another laptop. I can't collect a working dump from my original and the update from the site. Please help me. 2 original bios in the archive.
    650 G4 CHROMIA-6050A2930001-MB-A01(A1)
    SN 5CG91625N3
    Attached Files

    Leave a comment:


  • bykanovm
    replied
    Help me with BIOS on 650 G4 motherboard CHROMIA-6050A2930001-MB-A01(A1)
    SN 5CG91625N3
    In my old one there is a black screen and gradually the fan turns at maximum speed​
    origSN_5CG91625N3.rar

    Leave a comment:


  • hoaca388
    replied
    Originally posted by hieu13pro
    Hello, my device is having an error. The problem is that after 10 minutes of use, the device automatically resets. This is my old bios backup, please help me fix it.

    HP ProBook 650 G4 BIOS CHROMIA-6050A2930001-MB-A01
    series: 5CG9104X7Q​
    HP ProBook 650 G4 Notebook PC - Q83
    Attached Files

    Leave a comment:


  • hieu13pro
    replied
    Hello, my device is having an error. The problem is that after 10 minutes of use, the device automatically resets. This is my old bios backup, please help me fix it.

    HP ProBook 650 G4 BIOS CHROMIA-6050A2930001-MB-A01
    series: 5CG9104X7Q​
    Attached Files

    Leave a comment:


  • ribar96
    replied
    Re: HP ProBook 650 G4

    my programmer is not good enough for this chip and i can't read it. I use EZP2019, can you recommend another better one so I can order for Bosnia?

    Leave a comment:


  • SMDFlea
    replied
    Re: HP ProBook 650 G4

    Originally posted by ribar96
    my main problem is that you were locked to me :/

    which chip should I download to be able to take the bios program with it? I'm a beginner in this so I'm interested?
    Backup both of them,then post both.

    Leave a comment:


  • ribar96
    replied
    Re: HP ProBook 650 G4

    my main problem is that you were locked to me :/

    which chip should I download to be able to take the bios program with it? I'm a beginner in this so I'm interested?
    Last edited by SMDFlea; 10-03-2023, 01:50 PM. Reason: merged 2 posts

    Leave a comment:


  • SMDFlea
    replied
    Re: HP ProBook 650 G4

    Originally posted by ribar96
    you mean these two chips. thanks in advance
    Yep ,backup the 25Q128 chip. If its only got an admin pass RCUnlocker will unlock it.If it has a user pass as well backup the other chip and post both. Please post the laptop serial number,its required.You`ll find links to RCUnlocker if you read - https://www.badcaps.net/forum/showthread.php?t=103570

    .

    Leave a comment:


  • ribar96
    replied
    Re: HP ProBook 650 G4

    you mean these two chips. thanks in advance
    Attached Files

    Leave a comment:


  • SMDFlea
    replied
    Re: HP ProBook 650 G4

    Originally posted by ribar96
    attached is a picture of the motherboard, and the label is
    CHROMIA-60650A2930001-MB-A01(A1)
    You can see on the board where I was trying to remove one chip it said winboard, but I'm not sure if that's it.
    Post the part number etched onto both of the WSON8 chips.

    .

    Leave a comment:


  • ribar96
    replied
    Re: HP ProBook 650 G4

    attached is a picture of the motherboard, and the label is
    CHROMIA-60650A2930001-MB-A01(A1)
    You can see on the board where I was trying to remove one chip it said winboard, but I'm not sure if that's it.
    Attached Files

    Leave a comment:


  • peste
    replied
    Re: HP ProBook 650 G4

    Originally posted by ribar96
    Hello people
    I need help, I need to unlock the bios on my hp, but I don't see the bios chip, does anyone have a picture where I can find it. thank you in advance.
    well, you'd better post clear pictures of the motherboard on both sides..

    Leave a comment:


  • ribar96
    replied
    Re: HP ProBook 650 G4

    Hello people
    I need help, I need to unlock the bios on my hp, but I don't see the bios chip, does anyone have a picture where I can find it. thank you in advance.

    Leave a comment:


  • JParker13
    replied
    HP Probook 650 g4

    A relative has bought a used laptop online and has asked me to check if I can remove the messages that appear when starting the laptop.

    The following two messages appear

    - Your system is not fully configured. Please contat HP customer support
    -This BIOS is not for Production Use


    I have tried to update the bios but it gives error. The bios version is Ver 80.31.00.

    Thanks.

    Leave a comment:

Related Topics

Collapse

  • Vesko356
    [Guide] How to find the right HP bios version to flash
    by Vesko356
    First of all thanks to all of our members who have posted previously all methods posted here.
    Please leave a comment if you find something new,or have anything else to add.
    -----------------------------------------------------------------------------------------

    Find by serial number,model number or series

    If you know the laptop serial or model number go to HP support https://support.hp.com/us-en/drivers/laptops .
    Enter the serial number or model number and click submit.On the next screen you will have to enter the OS
    Operating system and OS version.If...
    08-11-2023, 03:27 AM
  • jbonavita
    ASUS TP500LA BIOS request/repair/merge?
    by jbonavita
    Hi, my laptop wont boot at all
    With original bios no POST, only LED lights
    With alternative BIOS from model TP500LN (flashed via programmer) the notebook works again
    Some issues
    A- with bios from 500LN, it won't update from bios of model 500LA (from 500LN v203 to 500LA v300)
    B- If updated from 500LN version 203 to 300, the battery stops being recognized

    Things I tried

    1- Update / clear ME: Took the non working bios, made a backup, and did this: https://www.badcaps.net/forum/troubl...theory/trouble...
    04-29-2025, 09:38 PM
  • zenius
    [REQUEST] Dell G3 3579 BIOS Password & AMI Protected Range/BIOS Guard Unlock
    by zenius
    Hello, I have an old Dell G3 3579 (ST: 2WQ7LP2-8FC8) with a newer 8FC8 BIOS password. I have successfully attached to the flash chip (W25Q128JVSQ) on the motherboard with a CH341A programmer and made several modifications using Intel FIT (e.g., allow software SPI write) without bricking. I was also able to boot to a modified GRUB shell where I attempted to edit many BIOS security related options like BIOS Guard/Lock, Flash Signature Override, ME FW Image Re-Flash, etc.

    Unfortunately, some of these modifications like to Intel BIOS Guard failed because it is fused into the PCH. Also,...
    12-08-2024, 06:13 AM
  • Wahaz
    Lenovo Thinkbook 15 G2 ITL i5 (serial number: MP2BFZEF) bios request
    by Wahaz
    Hello,

    I have a Lenovo Thinkbook 15 G2 ITL i5 Laptop (serial number: MP2BFZEF) that when I turn it on, the led on the power button lights up for 5 seconds, then goes out. There's no display and nothing happens.
    So I thought it was a Bios problem.
    I found 3 bios chips on the board, which I read with a bios programmer: two XMC model bios chips and a Winbond model bios chip. Each XMC model bios chip has two partitions named XM25QH128A [3.3V] and XT25F128A [3.3V]. And the Winbond model bios chip has three partitions named W25Q80BL 3.3V, W25Q80xV 3.3V and W25Q80DV 3.3V....
    10-30-2023, 08:42 PM
  • Bloodhoundje
    HP Pavilion Gaming Laptop 15-ec2523nd - Dimm2 slot disabled after corrupt bios repair? Advice requested.
    by Bloodhoundje
    Hi everyone,

    I have been doing hardware repair as a hobby for some years now and recently decided to learn about repairing laptops as a fun challenge.

    I managed to get my hands on a "HP Pavilion Gaming 15-ec2523nd" notebook that only shows a white power LED and doesnt respond to anything.

    After initial testing I concluded the bios seems to be corrupted since all voltages are normal and there are no shorts. HP has a feature for a bios restore from USB with winkey+B for this model. This did not work.

    I have desoldered the bios chip (GigaDevice...
    03-16-2024, 03:12 PM
  • Loading...
  • No more items.
Working...