Re: Panasonic CF53 MK4 CF-532S74RMG
i tried this already but no success, asking for original password
and
Password= password not working
Panasonic CF53 MK4 CF-532S74RMG
Collapse
X
-
Re: Panasonic CF53 MK4 CF-532S74RMG
looking with
5B 02 B6 E8 11 59 6C FB C7 14 22 6F 7D AB D8 11 33 D4 8E 0D E9 1D 44 67 9F FC FA E3 55 34 B0 9C 0B 0C 66 4C C1 D3 1C C0 77 16 D2 A9 2D 3D 88 D0 E3 63 3E F7 99 8A F4 1D 4F B1 AA 44 05 D8 60 6B
may be??
more repetition in dumpLeave a comment:
-
Re: Panasonic CF53 MK4 CF-532S74RMG
1. Rewrite the BIOS
2. In setup, enter a new password in Admin Password, save and exit
3. In setup, set the default settings, save and exit.
4. In setup, remove password, save and exit.Leave a comment:
-
-
-
Re: Panasonic CF53 MK4 CF-532S74RMG
TryAttached FilesLeave a comment:
-
Re: Panasonic CF53 MK4 CF-532S74RMG
please unlock this file thank youAttached FilesLeave a comment:
-
-
-
-
-
Re: Panasonic CF53 MK4 CF-532S74RMG
please this one too unlock + me clearAttached FilesLeave a comment:
-
Re: Panasonic CF53 MK4 CF-532S74RMG
Attached FilesLeave a comment:
-
Re: Panasonic CF53 MK4 CF-532S74RMG
#qayyum786
Hi all,
can anyone please unlock
+ ME clear this bios file.
ThanksAttached FilesLeave a comment:
-
-
Re: Panasonic Cf-53 Password clear please
Thank you very much worked fineLeave a comment:
-
Re: Panasonic Cf-53 Password clear please
tryAttached FilesLeave a comment:
-
Re: Panasonic Cf-53 Password clear please
where can i see about MK?Leave a comment:
-
Related Topics
Collapse
-
by AquaMan UaHello. I am asking you for a hint on how to solve the problem with my touchbook Panasonic CF53-2 standart model. After setting up the BIOS, the laptop displays the wrong image until Windows loads. (More precisely, it displays, but distorted, instead of the Panasonic image immediately after turning it on, it displays what is in photo #1 in the attached file) Then the image appears when Windows starts loading and then there are no problems with the screen until the reboot. If you enter the BIOS, just a black screen. If you connect an external screen, the image on it is the same as on the built-in...2 Photos
-
Channel: BIOS Requests ONLY!
-
-
by aa10aa10Good day,
I have tried to remove BIOS supervisor password from Panasonic Toughbook CF-33 mk1. Model number CF-33AENABTG, unfortunately I don't have any other info.
I read the BIOS using afuwin, edited it and tried to flash new edited BIOS using afuwin. Unsuccessfully. Afuwin showed "Error: Problem erasing flash." starting with 0x00040000 and stoped. Then I tried many other options to flash BIOS from Windows without any luck. Finally i rebooted the device - and no post. Afterwards I have read the corrupted bios chip (MX25L12873F) using EZP2010 programmer....-
Channel: BIOS Requests ONLY!
-
-
by Vesko356First of all thanks to all of our members who have posted previously all methods posted here.
Please leave a comment if you find something new,or have anything else to add.
-----------------------------------------------------------------------------------------
Find by serial number,model number or series
If you know the laptop serial or model number go to HP support https://support.hp.com/us-en/drivers/laptops .
Enter the serial number or model number and click submit.On the next screen you will have to enter the OS
Operating system and OS version.If...-
Channel: BIOS Requests ONLY!
-
-
I usually try to figure these things out on my own but am asking for help now as I have been beating my head against a wall.
Backstory, I initially ended up with a CF20 Mk2 with a locked BIOS. I used aptio to read the BIOS and made the adjustments to the .rom file and attempted to write it back with aptio before reading other users problems with that setup. Well it bricked the BIOS go figure. Computer no longer boots, black screen. I found a clean BIOS on this forum but now I am having ME issues. So I would rather hand over the aptio dump(pre BIOS brick) and a hardware reader dump(post...-
Channel: BIOS Requests ONLY!
-
-
by outsiderHello
I removed the BIOS password thanks to the help of one of the friends of this forum.
https://www.badcaps.net/forum/troubl...61#post3637661
The batch from which the password was removed works correctly but... after some time, the BIOS password is set again, I reprogrammed the batch with the removed password, it's ok, there is no password, I set my password, ok, I can enter the BIOS with my password but...-
Channel: BIOS Requests ONLY!
-
- Loading...
- No more items.
Leave a comment: