Please UX510UX bios needed TKS
-
-
-
Re: Bios UX510UX needed
this is my original biosComment
-
Re: Bios UX510UX needed
Sorry this is the original file the other file is a bios from internet but not workAttached FilesComment
-
-
Re: Bios UX510UX needed
with this i see green led on battery and withe on power but black screen and motor of hdd don't spin.Comment
-
-
Re: Bios UX510UX needed
attchacment missingComment
-
g1 assassin Rev 1 bios dump - main and backup needed
main and backup ic dead so i cant post corrupt bios cause its 01 all over.
thanks
01-23-2024, 03:26 AM -
Hi, I have an MSI PRO B660M-G DDR4 board with damaged BIOS and i need a bios dump from a real board, along with MAC, UUID and Serial Number info (eg. a BIOS screenshot and pictures from the board stickers).
I need to reconstruct the bios on my board, based on another bios image form a real board - meaning a bios image containing MAC address, UUID and Serial number. A stock BIOS is not suffiecient, as it is impossible to discover where the MAC, UUID and SerialNumber are stored. Tried with a similar board, but there are too much differences, and the stock BIOS is missing a lot of...11-17-2023, 10:56 AM -
Recently I used the official Lenovo bios updater software on my ThinkBook 13s G3 ACN (20YA0005GE). The updating process failed and I got a black screen after powering the device. Of course I did not make an own backup before using the Lenovo bios updater.
I bought a CH341A programmer and was able to make a connection to the chip while it is still soldered on board. But I did not realise that the chip was a 16MB size and selected the wrong size (8Mbit / 1 MByte) before reading the content of my chip. So the dump I did before erasing the chip is only 1MByte big. I fear that I lost... -
Hi everyone,
I'm trying to recover a Fujitsu Lifebook E5513 (most likely 2023 model) that was bricked during a BIOS update. The update was interrupted (probably due to power loss), and now the laptop is stuck in a boot loop showing "PBB rollback" / "SBB rollback" messages.
BIOS access (F2) and Boot Menu (F12) are no longer possible – the system instantly reboots after the rollback messages.
I extracted the official BIOS update package from Fujitsu (contains FJNB2FD.CAP, ~18.7 MB) and tried tools like UEFIExtract, but it seems to only contain... -
Beelink/AZW drop Z83 support for this device.
I need BIOS for AZW Z83-V.
Sticker code: Z85-D3X8-G-V1.2-Z8350-4G+64G
Board code: Z85-D3X8-V1.2
Known working bios version Z85_0303 X64
filename: Z85_D303_Z83-V_AZW_window_NoPowerON0428.bin
Thank you in advance!
Comment