Hey guys,
have a laptop here that has a supervisor Password (dump in Attachements).
Before i write the Serial NR.etc i wanted to say that strangely after flashing with 3 different Bios dumps and one from lenovos site
the laptop works but everytime it wants me to type a supervisor password i never set.
I thought the supervisor password is stuck in the ec bios but no it isn't either because after replacing the ec chip from one of another board it still has the supervisor password.
Anyway i wanted to ask what of the two chips is the ec bios because on the left...
Lenovo L490 Password Removal Request
Collapse
X
Related Topics
Collapse
-
-
Channel: BIOS Requests ONLY!
-
-
by Johnny hHello,
I'm hoping someone can assist me.
I have an Asus Vivobook 16x Pro OLED laptop which has a BIOS password, and I can't seem to find it.
It still boots into Windows (boots from whatever SSD is installed but not from USB).
The model number is M7600R and serial number is N8N0CX03H71131C.
I tried AMITSESetup Decryptor but the password I got doesn't make sense (it's got a line break and special characters).
I also tried to use *************** MOD EDIT ,redacted************** and it also gave me the funny password of
Code:tmNx\'=QJQ
-
Channel: BIOS Requests ONLY!
-
-
by memoslarHi, i want password removal of Lenovo Thinkcentre M70q please.
The board is iq6x0il2.
I attach the bios bin.
Should i upload the second bios code? (ec)...-
Channel: BIOS & Schematic Requests!
-
-
by Tamil464Hello bios expert!
I have lenovo laptop using past 3 years i just enter the bios to enable virtualization for some purpose it asks password. i dont even remember when i put the admin password.
Model details
ideapad S145-15API
Type 81UT
S/N PF1D97WV
MTM 81UT0079IN
I already have ch341a bios programmer i used it for my another laptop once before 4 years i dont have a soc clip (it was missed) so now i need to remove the bios ic from my laptop motherboard and place it in ch341a dongle. The quick questions...-
Channel: BIOS Requests ONLY!
-
-
by techcrazeLong story short. i am building a fully custom car radio. and want to use a extremely bright LCD.
sadly the DGPU seems to be nonfunctional after i fixed the bios (fried voltage controller). so the Original HDMI port does not work.
you can use a EDP TO HDMI adapter to add a HDMI port as replacement to the onboard EDP LCD connector,
HOWEVER it turns out. lenovo enforces a LCD whitelist.
this means you cannot upgrade the LCD despite matching EDP specs and voltages.
If i connect a new screen directly to the system. only static shows....-
Channel: BIOS Requests ONLY!
-
- Loading...
- No more items.