HP EliteBook 8740w nonVPRO bios dump need

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Thunder1986
    Member
    • Feb 2015
    • 25
    • Hungary
    #1

    HP EliteBook 8740w nonVPRO bios dump need

    I have a nonVPRO motherboard whose BIOS has crashed during a motherboard repair. I found a BIOS here but the VPRO descriptor is locked. I can't switch because of this. I would need a nonVPRO or a completely virgin BIOS dump. I want this because the fan is currently running at full speed.
    Thank you!
    Tags: None
    • Thunder1986
      Member
      • Feb 2015
      • 25
      • Hungary
      #2
      Re: HP EliteBook 8740w nonVPRO bios dump need

      I finally solved it. I put the old BIOS dump ME firmware into the new working BIOS dump. And the fan operation has improved

        Comment

        Previous template Next

        Related Topics

        Collapse
        • Habble7
          I need a BIOS dump for the Samsung S49CG934SU monitor
          by Habble7
          The Samsung S49CG934SU monitor does not power on - no LED indicator activity and no response to power button. However, when 21V power is connected, it immediately draws 0.8A of current with no display output. The motherboard processor gets warm, and there is continuous reading activity from the W25Q128BV BIOS chip.

          Suspected Cause:
          I suspect the BIOS may have been corrupted during a power interruption while updating the firmware. The official website provides firmware updates, but they can only be installed via USB flash drive.

          Troubleshooting Attempts:
          ...
          05-22-2025, 07:28 AM
        • DynaxSC
          MSI PRO B660M-G DDR4 - real bios dump from board needed (no stock bios)
          by DynaxSC
          Hi, I have an MSI PRO B660M-G DDR4 board with damaged BIOS and i need a bios dump from a real board, along with MAC, UUID and Serial Number info (eg. a BIOS screenshot and pictures from the board stickers).

          I need to reconstruct the bios on my board, based on another bios image form a real board - meaning a bios image containing MAC address, UUID and Serial number. A stock BIOS is not suffiecient, as it is impossible to discover where the MAC, UUID and SerialNumber are stored. Tried with a similar board, but there are too much differences, and the stock BIOS is missing a lot of...
          11-17-2023, 10:56 AM
        • mediadoctor
          Need bios dump HP EliteBook G845 G8 with AMD and Touchscreen support
          by mediadoctor
          Can you help me upload Bios dump from HP EliteBook 845 G8 with AMD CPU and Touchscreen please 🤝
          07-20-2025, 09:38 AM
        • Guest
          Elitebook 850 G5 BIOS bricked
          by Guest
          Hello,

          I have an EliteBook 850 G5. After a Windows update, including a BIOS update, the notebook turns on, but the screen remains black, and the fans spin at high speed—nothing else happens.

          I assume the BIOS update failed, so I searched for the BIOS chip.

          I found a Winbond chip located between the RAM and the hard drive, which has a size of 32 MB.

          However, the BIOS update available on HP's website is only 17 MB in size. I used the update version that was previously installed when the notebook was still working.

          Can the corrupted...
          03-24-2025, 01:21 AM
        • MDSI
          HP OMEN 17-an012nf BIOS dump with EC (DAG3BAMBAF0 REV : F)
          by MDSI
          Hello,

          I'm requesting a full BIOS dump (including EC firmware) for an HP OMEN 17-an012nf laptop.

          Details:
          Model : HP OMEN 17-an012nf
          Motherboard Part Number : DAG3BAMBAF0 REV : F
          Serial Number (S/N) : 5CD7280D51
          BIOS chip : Winbond W25Q64VSIQ
          Programmer : EZP2023+
          Issue : The motherboard is not powering on. Only the 5V rail is present. The 3.3V rail is missing because EN1 on the SY8286B remains stuck at 0V. This signal is driven directly by the EC/SIO. I replaced the 3.3V regulator and confirmed it's working.

          I already...
          Yesterday, 07:11 AM
        • Loading...
        • No more items.
        Working...