-
Hi
please unlock the bios password
Thank you
Serial Number 5CG1047SHH
ProID 8PZ98AVLeave a comment:
-
thank you sir for your help
but i have problem i get hp sure start and i can't enter the bios and i can't bootLeave a comment:
-
Hi
please unlock the bios password
Thank you
Serial Number 5CG1047SHH
ProID 8PZ98AVLeave a comment:
-
read the rules..https://www.badcaps.net/forum/troubl...before-posting
post the full name and model S/N, motherboard model, original bios, etc.Leave a comment:
-
-
-
-
Serial number ? https://www.badcaps.net/forum/troubl...before-posting -
can you anyone please unlock my HP elitebook 840 G7
here are the dump file
and here is the serial number 5CG1070F1X
Leave a comment:
-
Would it be possible for you to post a snapshot of the screen containing the error message? If not, pm meLeave a comment:
-
Hello, I have an old Dell G3 3579 (ST: 2WQ7LP2-8FC8) with a newer 8FC8 BIOS password. I have successfully attached to the flash chip (W25Q128JVSQ) on the motherboard with a CH341A programmer and made several modifications using Intel FIT (e.g., allow software SPI write) without bricking. I was also able to boot to a modified GRUB shell where I attempted to edit many BIOS security related options like BIOS Guard/Lock, Flash Signature Override, ME FW Image Re-Flash, etc.
Unfortunately, some of these modifications like to Intel BIOS Guard failed because it is fused into the PCH. Also,... -
Hi everyone
I noticed on the Xgpro software the BIOS backup files have extra bytes at the end when reading some chips, this is because the Xgpro software also reads the OTP region of those flash chips, and by default will append that region to the saved file
Programmer models: XGecu TL866II Plus / T48 / T56 / T76
Example: GD25LQ128D (1.8V), IC size is listed as 0x1000000 Bytes (16777216 bytes) + 0xC00 bytes, those extra 0xC00 bytes will be appended to the end of the saved file by default, resulting in a file size of 16780288 bytes
There's also an extra OTP Secu.R... -
Hello everyone, I come here to tell you my problem regarding the power-on password. It is not a bios reset demand, and i can't have any access to windows. This is the bios and power-on password that is blocking all other things.
My Omen 15-dh0052nf purchased second-hand was configured with the bios password upon purchase (very simple password :P ).
Having decided to sell it in order to get something more powerful, I reset all BIOS settings and set a blank administrator password. But the power-on password cannot be changed to a blank one so I let the actual password set.... -
HI I have forgotten my old laptop Alienware 13 r1 bios password .
Can anyone find the master password for my laptop
The service tag number is : 2JJVH12 -
help me to unlock bios password ADVAN Soulmate board code: apn21s
...
Leave a comment: