dablidmb8eo rev e

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • toyoki
    Member
    • Nov 2014
    • 15
    • Algeria

    #1

    dablidmb8eo rev e

    hi i need toshiba l50-b-27w psktce-04T00MG4 motherboard dablidmb8e0 rev e i tried all files in forum doesn't work except one screen turn on without display just a horizontal ligne i tried a new screen the same i think because my motherboard have radeon graphic and 5TH G CPU SORRY FOR MY ENGLISH
    file attached is the one with ligne
    Attached Files
  • Mazorca
    Badcaps Veteran
    • Jan 2017
    • 463
    • USA

    #2
    Re: dablidmb8eo rev e

    I cleaned your bios, try it and reply. If you get the same line on left hand upper corner, take out hard drive, try again, I have had bad drives do this and never boot up.
    Attached Files

    Comment

    • toyoki
      Member
      • Nov 2014
      • 15
      • Algeria

      #3
      Re: dablidmb8eo rev e

      thanks for reply but its the same even without drive just lignes on screen and no display at all with hdmi

      Comment

      • toyoki
        Member
        • Nov 2014
        • 15
        • Algeria

        #4
        Re: dablidmb8eo rev e

        Plz help

        Comment

        • peste
          Super Moderator
          • Dec 2016
          • 12246
          • ROMANIA

          #5
          Re: dablidmb8eo rev e

          Originally posted by toyoki
          Plz help
          is it safe (PSKTCE) ?? .. because the posted bios is ..
          (PSKTNE) ... or did someone change the original bios ???
          Due to a lack of donations, server free space at a critical level, and possible closure of Bios Requests all donations are welcome, click:

          >>>>> https://www.badcaps.net/index.php?pageid=donate1 <<<<<

          Every donation made will go towards server fees and maintenance costs.

          Comment

          • toyoki
            Member
            • Nov 2014
            • 15
            • Algeria

            #6
            Re: dablidmb8eo rev e

            posted bios downloaded from here same motherboard code but mine is PSKTCE

            Comment

            • peste
              Super Moderator
              • Dec 2016
              • 12246
              • ROMANIA

              #7
              Re: dablidmb8eo rev e

              Originally posted by toyoki
              posted bios downloaded from here same motherboard code but mine is PSKTCE
              try ... bios extracted from the update on the site Toshiba + DMI and KEYWIN
              Attached Files
              Due to a lack of donations, server free space at a critical level, and possible closure of Bios Requests all donations are welcome, click:

              >>>>> https://www.badcaps.net/index.php?pageid=donate1 <<<<<

              Every donation made will go towards server fees and maintenance costs.

              Comment

              • toyoki
                Member
                • Nov 2014
                • 15
                • Algeria

                #8
                Re: dablidmb8eo rev e

                It work fine thank you so much

                Comment

                Related Topics

                Collapse

                • Ryan.man
                  Macbook 2017 with touchbar (A1706) won't turn on after removing the screen
                  by Ryan.man
                  Hello everybody! Posting this in hopes somebody has some expertise that leads to a clear path of troubleshooting that saves me a lot of time!

                  My macbook has the flex cable problem, the one that prevents the screen turning on. Ive been dealing with this for the last 3 years. Last year it went dead and I managed to fix it following youtube tutorials. But my fix wasnt the best, the problem returned a month later. This week, it went dead again. I again tried to fix it.

                  This time the original cable broke too close to the screen, it can't be fixed without tearing the screen...
                  02-04-2025, 12:23 PM
                • smic717394
                  iphone XS turns off when press on screen.
                  by smic717394
                  Hi,

                  I have a iphone XS that came in for a screen replacement, the screen was badly cracked, and inside missing scues, on the back of the screen still the blue protector, the screen was a LCD. So we replaced the screen and all good, installed the screen and we noticed that pressing the screen with a bit of force but not excessive, the phone dies. After plugging the charger it turns back on, but again if you press it it dies. I open the phone again, and I can't see anything major, with the phone open, if I press on the logic board, battery, charging board, or even putting pressure on...
                  07-25-2024, 10:16 AM
                • Chrissygizmo
                  Samsung UE55JU6800K half screen dark
                  by Chrissygizmo
                  Hello everyone, I’ve just been given a Samsung UE55JU6800K smart tv as it had white spots on the screen due to the led lenses falling off. After refitting them & putting the tv back together I thought it was a nice easy fix for a free bedroom tv , then I tried it before screwing the back into place. I realised that the right side of the screen was darker than the other side, I removed the screen again as I thought the backlights had failed but they are fine.
                  I put the screen back in place & turned it back on . The screen seemed to be ok again but different screens on the same...
                  02-10-2025, 12:33 AM
                • spice_disc
                  Vizio TV M50-C1 reboot cycle and static on screen
                  by spice_disc
                  I'm currently trying to diagnose and fix my Vizio TV (Model M50-C1). I've tried a number of different basic solutions, but I'm trying to determine if my issue is currently a failing panel, T-Con board, or main board (or something else entirely) and whether or not it is worth my time to fix it. Details of the issue and what I've tried are below as well as why I think it is either a bad panel, T-Con board, or main board.

                  The Issue: The TV will be on and working fine but after the TV is on for ~5-10 minutes the screen will freeze (with sound continuing) until the TV reboots itself. While...
                  09-08-2024, 02:37 PM
                • ipatch
                  ipad pro 9.7" blew a SMD component while replacing the screen 🤦‍♂️
                  by ipatch
                  i have an ipad pro 9.7" (1st gen) A1674 where i replaced the screen, but never attached the screen to the frame/chassis (glued down) due to the ipad being previously dropped so the new screen would never fit in the frame properly. so i need flex/bend the chassis to eventually fix the new screen in properly. so i temporarily just applied blue tape around the edges of the screen to keep it in place. when watching videos with the ipad the screen started flicker, so i though maybe the new quasi cheap amz screen i purchased was going out. so i disconnected then reconnected with power still on,...
                  08-24-2024, 02:36 PM
                • Loading...
                • No more items.
                Working...