Microsoft Surface Pro 7 NEED BIOS. HELP!

[Geentle Man]

PLEAS I NEED FRIMWERE ORGINEL BIOS FOR MICROSOFT SURFACE PRO 7+ (1960) SN:005471920453 THANK YOU

[bulldog uk1]

I am in need of someone to clean my password locked bios
Microsoft Surface Pro 7 1866
sn/047745103953
Bought from ebay

Much appreciated thanks

[JuginKrebs]

try this..

https://www.badcaps.net/forum/showthread.php?t=104153

Hello again,

I followed this guide ("https://www.badcaps.net/forum/troubl...e-fix?t=104153") (in my case, it's number 2 (-> "Integrated Sensor Hub Supported" is set to "YES")), and I cleaned the ME following this guide (https://www.badcaps.net/forum/troubl...cleaning-guide).

My problem is that in step 5, I need to overwrite the new "ME Region.bin" with the existing "ME Region.bin" in the decomp folder, but I don’t have an original "ME Region.bin" in the decomp folder at all. I tried just placing the new ME Region in the decomp folder, but now I’m stuck in a boot loop (Windows logo for 3-5 seconds, then the Surface turns off).

What am I doing wrong?

Thanks in advance for your help!

[Jogy2]

Im so sorry , i am stupid again i read the whole time the wrong flash. I testet the file by me analyzer, but i think it was encryptet. Now i have the right one.

Issue: at start only 3 seconds Windows logo
Model: Surface 7 Pro 1866
SN: 051464104753

Thx

Please merge this with my post below.

[Jogy2]

К сожалению, это ошибка ME. Тачскрин не работает.

Sorry for my late reaction.
Thank you for your Answer, but can you say me what is a Me Issue, and what i can do to fix it?
I have read the Bios again and i think the other one is to small with 2 Mbyte, the new one have 4Mbyte

[peste]

Hello Community,

I'm experiencing an issue with my touchscreen. My Surface had a broken display, but the touchscreen was working perfectly fine. After replacing the display, the touchscreen initially worked on the new one, but a day later, it stopped functioning completely. It doesn’t even work in the UEFI menu anymore.

I’m not sure if an update was downloaded in the meantime, or if it just stopped working on its own. I've tried several solutions: resetting the tablet multiple times, reinstalling the drivers, and even doing a full recovery reinstallation of Windows from a USB stick.

Could performing an ME Clean help? The touchscreen issue isn’t mentioned as symptom in guides on this forum.

Attached is the BIOS dump of my Surface Pro 7, in case anyone has any ideas on what might be causing this.

Surface Pro 7 i5/256GB/8GB
Model:1866
S/N: 058020604853

try this..

https://www.badcaps.net/forum/showthread.php?t=104153

[JuginKrebs]

Hello Community,

I'm experiencing an issue with my touchscreen. My Surface had a broken display, but the touchscreen was working perfectly fine. After replacing the display, the touchscreen initially worked on the new one, but a day later, it stopped functioning completely. It doesn’t even work in the UEFI menu anymore.

I’m not sure if an update was downloaded in the meantime, or if it just stopped working on its own. I've tried several solutions: resetting the tablet multiple times, reinstalling the drivers, and even doing a full recovery reinstallation of Windows from a USB stick.

Could performing an ME Clean help? The touchscreen issue isn’t mentioned as symptom in guides on this forum.

Attached is the BIOS dump of my Surface Pro 7, in case anyone has any ideas on what might be causing this.

Surface Pro 7 i5/256GB/8GB
Model:1866
S/N: 058020604853

[hoaca388]

Can someone please help me remove the bios uefi password?
I bought a bad screen pro7+ from ebay and replaced it with a brand new one and found out that the bios is locked with a password and I can't use usb to boot it up Please help me!
Surface pro7+ SN:021945714553

Try

[asd90011]

Can someone please help me remove the bios uefi password?
I bought a bad screen pro7+ from ebay and replaced it with a brand new one and found out that the bios is locked with a password and I can't use usb to boot it up Please help me!
Surface pro7+ SN:021945714553

[SeverSem]

bios

К сожалению, это ошибка ME. Тачскрин не работает.

[Jogy2]

Sorry i can´t edit my first Post. Please Delete it.
Hello i´ve dump my bios from the Surface 7 Pro MX25U1635E (1,8V) ic. It is not running (only 2 seconds windows logo" can anyone help me.

S/N: 051464104753
Model: VDH-00003 (1866 ?) (Surface 7 pro with i3

[peste]

Hello i´ve dump my bios from the Surface 7 Pro MX25U1635E (1,8V) ic. It is not running (only 2 seconds windows logo" can anyone help me.
thx Jogy2

read the rules..https://www.badcaps.net/forum/troubl...before-posting
post the S/N,the full name and model of the laptop,etc..

[Jogy2]

Hello i´ve dump my bios from the Surface 7 Pro MX25U1635E (1,8V) ic. It is not running (only 2 seconds windows logo" can anyone help me.
thx Jogy2

[SMDFlea]

Please help. The SPI memory has failed. Replaced it, but the saved original dump may be damaged. Now the error is ME fimware and Touch fimware. The touchscreen doesn't work. Please help me edit the dump. Device serial number 051619693553

bios

[leninmdz]

Hello everyone
I have a problem with Surface Pro 7, it gets stuck on the logo, it was in the process of updating, it suddenly turned off and the update did not finish
I was able to clear the region, now it turns on for a few seconds with the logo and turns off
Model: 1866
SN: 022557712053
Thanks for the help

[SeverSem]

Please help. The SPI memory has failed. Replaced it, but the saved original dump may be damaged. Now the error is ME fimware and Touch fimware. The touchscreen doesn't work. Please help me edit the dump. Device serial number 051619693553

[SMDFlea]

I just tried dump from post 308, but now the touchscreen not working.

Please clean my dump, if it is possible, post 310, pls

Tnx,
Cristian

try

[domnulv]

I just tried dump from post 308, but now the touchscreen not working.

Please clean my dump, if it is possible, post 310, pls

Tnx,
Cristian

[kalilinux25]

Please help me to clean my dump Surface 7 pro model 1866, The SN is 004624502653, the bios has supervisor password,

Tnx very much,

Cristian

try post # 308

[domnulv]

Please help me to clean my dump Surface 7 pro model 1866, The SN is 004624502653, the bios has supervisor password,

Tnx very much,

Cristian