Microsoft Surface Pro 7 NEED BIOS. HELP!

[nguyendo_yen]

Help me turn on the machine and the logo interrupts for 1 second. Sn032811613253

[ajbernasko]

I downloaded the firmware and drivers from Microsoft

[Bios Cracker]

Hello, For some reason I replaced this Pro 7 screen with a Pro 5 and it's TCON but touch stopped after restart, It updated after that touch does not work with original bad screen neither with the Pro 5's. I dont know if there is a fix for this actually.

Try and Update.

[ajbernasko]

Add your serial number.

010091302753

[Bios Cracker]

Hello, For some reason I replaced this Pro 7 screen with a Pro 5 and it's TCON but touch stopped after restart, It updated after that touch does not work with original bad screen neither with the Pro 5's. I dont know if there is a fix for this actually.

Add your serial number.

[ajbernasko]

Hello, For some reason I replaced this Pro 7 screen with a Pro 5 and it's TCON but touch stopped after restart, It updated after that touch does not work with original bad screen neither with the Pro 5's. I dont know if there is a fix for this actually.

[Juan__Perez]

Unlocked

It works good! all issues disappeared and there isn't touch issue, touch is ok! I really appreciate your help!

[SMDFlea]

same(((

try these.

[steam007]

try this one.

same(((

[SMDFlea]

bump

try this one.

[steam007]

Can someone please help me? My Surface won't start properly and keeps showing the logo for about 3 seconds before nothing else happens.((((
My serial number is:001842693753

bump

[hoaca388]

My serial number is:

057861102053

Unlocked

[Juan__Perez]

Hi everyone, I had boot issues with my Surface pro 7 (blocked by password), so I charged file .bin of 40' post and it removed the BIOS password! But now sometimes it doesn't start Windows, it just freezes. I've already reinstalled Windows and tried updating all the firmware (drivers). I found it's better to work with the original BIOS file.
Would you please remove the password from my original BIOS? (i attach my file)

My serial number is:

057861102053

[SMDFlea]

Please post the laptop serial number.

[Juan__Perez]

Hi everyone, I had boot issues with my Surface pro 7 (blocked by password), so I charged file .bin of 40' post and it removed the BIOS password! But now sometimes it doesn't start Windows, it just freezes. I've already reinstalled Windows and tried updating all the firmware (drivers). I found it's better to work with the original BIOS file.
Would you please remove the password from my original BIOS? (i attach my file)

[tmks2]

is it possible to edit UUID number? serial number is visible in bios. How to change UUID?

[steam007]

Can someone please help me? My Surface won't start properly and keeps showing the logo for about 3 seconds before nothing else happens.((((
My serial number is:001842693753

😢😢😢😢

[rmfr1225]

I just invalidated pass and IPC entries, try just with pass entry invalidated. From my experience this will allow you to have partial control of bios settings, without IPC invalidated but give it a try.

Thank you so much again! Unfortunately, same behaviour, 3 secs logo and goes off. I used a new flash IC also just in case, but same thing! What can be wrong?

Thanks!

[steam007]

Can someone please help me? My Surface won't start properly and keeps showing the logo for about 3 seconds before nothing else happens.((((
My serial number is:001842693753

[volinakis]

Hello,

First off, thank you very much for ttkaing your time to try to help me!!

Secondly, unfortunately, still no luck, now it boots for 3 sec and then goes off. To be sure notthing was wrong, I re-flashed original one and it works, but of course still has tthe password.

Do you mind to give another try?

Thank you!

I just invalidated pass and IPC entries, try just with pass entry invalidated. From my experience this will allow you to have partial control of bios settings, without IPC invalidated but give it a try.