Microsoft Surface Pro 7 NEED BIOS. HELP!

[Udemzy]

From experience, always confirm bios is OK via uefi tool after backup, it is very important else you'll end up with bootloop when you reprogram it.
You'll get invalid checksum or any error messages at the bottom of the uefi tool.

Again, using another chip instead of the one that came with the surface pro won't allow it to touch or boot fast.

[azizi abdelhak]

plz fix old bios surface pro 7 + 1961
logo 4 sec shutdown

[SMDFlea]

plz read the rulez and post the serial number -> https://www.badcaps.net/forum/troubl...before-posting

[azizi abdelhak]

plz fix old bios surface pro 7 + 1961
logo 4 sec shutdown

Sn 026716614953

[minhdigital]

Sn 026716614953

Send to you, try

[Leinad78]

From experience, always confirm bios is OK via uefi tool after backup, it is very important else you'll end up with bootloop when you reprogram it.
You'll get invalid checksum or any error messages at the bottom of the uefi tool.

Again, using another chip instead of the one that came with the surface pro won't allow it to touch or boot fast.

Any information on that topic? I opened the file in the corresponding flash image tool and so far it looked ok. I just get the stupid boot loop and even without the battery i can´t get rid off it. Thats why i was thinking it´ll be the Bios. If you have different routine or software on hand, i´m happy to learn

[clrscr]

Please help me unlock password surface pro 7
Serial Number: 014870101453
thanks!

[volinakis]

Please help me unlock password surface pro 7
Serial Number: 014870101453
thanks!

here

[clrscr]

here

thanks!!!

[clrscr]

here

password remove but touch Screen not working

[clrscr]

here

password remove but touch Screen not working, can you help me fix again ?

[DNAGSM]

can help me to clean my bios password?
Thanks and Advance...

Model	Microsoft Surface Pro 7 Plus
Model Number	1960
Serial Number	041778104953
Board ID	MP5 W MB REV: J

[hoaca388]

can help me to clean my bios password?
Thanks and Advance...

Model	Microsoft Surface Pro 7 Plus
Model Number	1960
Serial Number	041778104953
Board ID	MP5 W MB REV: J

Unlocked

[DNAGSM]

Unlocked

no working , after pressing the power button, a logo appears and then turns off

[kjchatman]

the majority of these have a non working pch. just because the screen comes on for a few seconds doesn't mean that the cpu is active. press the power button and check if 3.3v shows up on rsmrst# and sam_pch_pwrbtn for a few seconds then check slp_s4#. the first two signals are sent to the pch then the pch sends out slp_s4#