Re: Hp 820 g1
Hi,
Nobody can help on this ?
Hi,
Nobody can help on this ?
-
-
Last edited by peste; 04-14-2021, 10:55 AM.Due to a lack of donations, server free space at a critical level, and possible closure of Bios Requests all donations are welcome, click:
>>>>> https://www.badcaps.net/index.php?pageid=donate1 <<<<<
Every donation made will go towards server fees and maintenance costs.Comment
-
Re: Hp 820 g1
already desoldering and reprogramming same problem? Even with new chip same problemComment
-
Re: Hp 820 g1
Maybe you destroy a small cap/resistor near bios pads , try to verify at another motherboard or search HD picture to confirm.Comment
-
Re: HP EliteBook 820 G1 Bios
Hi everyone,
Thank you first for all the informations and services offered on the site.
I have to unlock a HP 820 G1 (bios locked). It would seem, to make a correct bios dump, that it is necessary, on this model, either desolder the eeprom, or solder wires to it (and dump for only the eeprom, not eeprom + EC). Am I right ? I do not know these technics: would you have a solution that would only require a simple clip? Do you need to use any particular software and, if so, which one ?
Thanks for rour reply and best regards.Comment
-
Re: HP EliteBook 820 G1 Bios
you will need an SPI programmer.
https://www.youtube.com/watch?v=DWWigscuQDYDue to a lack of donations, server free space at a critical level, and possible closure of Bios Requests all donations are welcome, click:
>>>>> https://www.badcaps.net/index.php?pageid=donate1 <<<<<
Every donation made will go towards server fees and maintenance costs.Comment
-
Re: HP EliteBook 820 G1 Bios
Yes, of course. But I want to know if, for unlocking a bios password, I must make dump(s) of only the eeprom or eeprom AND EC ? And about making the bios dump, must I desoldier it (never do it before) or can I use a clip + ch341A + flashrom or ch341a software or another programmer software (which one in this case) ?
Thanks for your reply and best regardsComment
-
Re: HP EliteBook 820 G1 Bios
you only need to remove the contents from the bios chip, it is good to remove the chip from the motherboard, and solder it on the programmer if you have ch341A,
and you do not have an adapter for bios chips ..
you can soder wires between the programmer and the chip bios on the motherboard,
if you can't remove it..do not use the clip because you will have errors..
don't forget to make a bios copy before writing the bios chip..if you have CH341A use one of these two programs ..
https://www.badcaps.net/forum/showpo...6&postcount=10
https://www.badcaps.net/forum/showpo...04&postcount=7Due to a lack of donations, server free space at a critical level, and possible closure of Bios Requests all donations are welcome, click:
>>>>> https://www.badcaps.net/index.php?pageid=donate1 <<<<<
Every donation made will go towards server fees and maintenance costs.Comment
-
Re: HP EliteBook 820 G1 Bios
Hi, I have 820 G1 [2pcs] laptops. Both laptops had delay display problem due to bad me region. I flashed bios with clean me . Now display comes in 2-3 seconds. But shows error
Warning Machine is not in committed State.
Can anybody help me to get rid of this error ??
Thanks in AdvanceComment
-
Due to a lack of donations, server free space at a critical level, and possible closure of Bios Requests all donations are welcome, click:
>>>>> https://www.badcaps.net/index.php?pageid=donate1 <<<<<
Every donation made will go towards server fees and maintenance costs.Comment
-
Re: HP EliteBook 820 G1 Bios
pls help me bios password clearComment
-
Re: HP EliteBook 820 G1 Bios
Doesn`t RCUnlocker or HPUnlocker work ? https://www.badcaps.net/forum/showpo...42&postcount=4Comment
-
Re: Hp 820 g1
thank you frend Haşere BroComment
-
HP 820 G1 Bios needed
Dear members, I need a working bin for model HP820 G1 (25Q128LF).
Serial: CNU421BLJD
Product: D7V73AV
Its not a problem of password. Its a bios corruption problem.
Can I use a bios from other models like 820 G2?
Best regards
David InácioComment
-
----------------------------------------------------------------------------------------------------------------------------------------------------------
All donations to Badcaps are welcome.
Become a Badcaps supporter
>>>>> click on this link to donate <<<<<
Thanks to all supporters.​
----------------------------------------------------------------------------------------------------------------------------------------------------------Doctrina est fructus dulcis, radicis amarae..Comment
-
Re: HP EliteBook 820 G1 Bios
Here it goes.Comment
-
Re: HP EliteBook 820 G1 Bios
I have been studying this and I wonder if maybe it as ME problem? Computer doesn't boot at all.Comment
-
Re: HP EliteBook 820 G1 Bios
Any ideas?Comment
-
Re: HP EliteBook 820 G1 Bios
if i pair these two i got online, should it work?Comment
-
Need Clean BIOS/EC Bin File for Lenovo ThinkPad Yoga 11e - Stuck with 0275 Error CMS
Hello everyone,
I am attempting a repair on a Lenovo ThinkPad Yoga 11e that is currently stuck at boot with the error: "0275 error CMS" even after setup new bios battery and will not allow me to enter the BIOS/Setup.
This is a critical issue that I believe requires flashing the BIOS chip directly using a programmer (e.g., CH341A/RT809H), as standard software updates or resets are not possible.
I have opened the laptop and identified the main BIOS chip... -
Hello, I have an old Dell G3 3579 (ST: 2WQ7LP2-8FC8) with a newer 8FC8 BIOS password. I have successfully attached to the flash chip (W25Q128JVSQ) on the motherboard with a CH341A programmer and made several modifications using Intel FIT (e.g., allow software SPI write) without bricking. I was also able to boot to a modified GRUB shell where I attempted to edit many BIOS security related options like BIOS Guard/Lock, Flash Signature Override, ME FW Image Re-Flash, etc.
Unfortunately, some of these modifications like to Intel BIOS Guard failed because it is fused into the PCH. Also,... -
Hello everyone, I come here to tell you my problem regarding the power-on password. It is not a bios reset demand, and i can't have any access to windows. This is the bios and power-on password that is blocking all other things.
My Omen 15-dh0052nf purchased second-hand was configured with the bios password upon purchase (very simple password :P ).
Having decided to sell it in order to get something more powerful, I reset all BIOS settings and set a blank administrator password. But the power-on password cannot be changed to a blank one so I let the actual password set.... -
Hi guys,
If someone would be able to provide some expertise, I'd be very grateful.
BIOS Corruption - Cause
So I managed to corrupt my machine by installing linux and enrolling custom secure boot keys. I did choose to enroll the Microsoft keys as well, to prevent any potential bricking due to 3rd party drivers from HP being signed with those keys.
After doing that, and rebooting(it did boot, powerLED, fanspin etc.), the laptop did not give any video output on the LCD or video connectors. I think I was able to get in BIOS and trigger the beeper by pressing ESC.... -
Hello
I removed the BIOS password thanks to the help of one of the friends of this forum.
https://www.badcaps.net/forum/troubl...61#post3637661
The batch from which the password was removed works correctly but... after some time, the BIOS password is set again, I reprogrammed the batch with the removed password, it's ok, there is no password, I set my password, ok, I can enter the BIOS with my password but...
Comment