GI5CNXA MB v1.0 Monster Abra A5 V13. 1
kbc and bios i need your file
kbc and bios i need your file
-
Electronicman -
Re: GI5CNXA MB v1.0 Monster Abra A5 V13. 1
Post your bios backup.... -
ElectronicmanComment
-
Re: GI5CNXA MB v1.0 Monster Abra A5 V13. 1
Mr. Bekir, let it live for a century.
))
hohohohoComment
-
Monster Abra a5 V13.1
Hello master's;
The problem is that the device does not turn off. After the shutdown command, the screen turns black and the fans are running at full power. When I clear the me region, the device does not detect sata and m2 devices.
Many thanks to those who will help with this.Comment
-
Re: Monster Abra a5 V13.1
Try Monster_abra_a5_v13_cleanME file first↵
Any donations to badcaps are welcome, click this link to donate . Thanks to all the supporters
https://www.badcaps.net/donateComment
-
Re: GI5CNXA MB v1.0 Monster Abra A5 V13. 1
the device does not turn off. I tried several kbc bios but no solution.Comment
-
Need Clean BIOS/EC Bin File for Lenovo ThinkPad Yoga 11e - Stuck with 0275 Error CMS
Hello everyone,
I am attempting a repair on a Lenovo ThinkPad Yoga 11e that is currently stuck at boot with the error: "0275 error CMS" even after setup new bios battery and will not allow me to enter the BIOS/Setup.
This is a critical issue that I believe requires flashing the BIOS chip directly using a programmer (e.g., CH341A/RT809H), as standard software updates or resets are not possible.
I have opened the laptop and identified the main BIOS chip... -
GI5CNXA MB v1.0 monster Abra A5 V13.3 SR40B HM370
Good luck to everyone, my problem is as follows. I have a la-f841p rev 1a motherboard, which occasionally gives a blue screen due to the processor running the motherboard. I installed the southern chipset of this motherboard into the short-circuited device with Monster Abra A5 v13.3 GI5CNXA MB v1.0. When I trigger the monster device, it goes up to 230mah and turns it off again. I have tried many of these devices before, but I did not get any results. They definitely want a brand new chipset. Other models do not have this problem,... -
Hi all,
My Samsung Galaxy Book 2 Pro 15.6-inch laptop has no display and won't boot.
The charging red LED lights up, but the charging screen doesn't show any indication.
When I press the power button, the blue LED cycles on and off three times, then the screen doesn't turn on, and the device won't boot.
(I've tried removing the battery and resetting the device, but the issue persists.)
NoteBook Model name : Samsung NT955XED-KK51G(Galaxy book2 pro, i5-1240p, 15.6inch AMOLED)
PCB model name : Venus2-15-5G(REV1.2), Venus2-15 ADL NPC
S/N : 5RNK9FFT70... -
Hello Everyone,
I have HUAWEI MateBook X Pro 2019 (MACH-WX9) whose BIOS got corrupted i beleive. I have acquired Ch341A SPI flasher to program the BIOS externally. I see that to program the BIOS, i need BIOS bin/hex file which i could use to reflash it externally via the flasher tool.
It seems like the support page of this model no longer exist: https://consumer.huawei.com/be/lapto...ro-2019/specs/
In the website, you can only see specs etc.
I have not tried to extract the BIOS dump yet as I want to see if there is any ray of sunshine... -
Hi everyone
I noticed on the Xgpro software the BIOS backup files have extra bytes at the end when reading some chips, this is because the Xgpro software also reads the OTP region of those flash chips, and by default will append that region to the saved file
Programmer models: XGecu TL866II Plus / T48 / T56 / T76
Example: GD25LQ128D (1.8V), IC size is listed as 0x1000000 Bytes (16777216 bytes) + 0xC00 bytes, those extra 0xC00 bytes will be appended to the end of the saved file by default, resulting in a file size of 16780288 bytes
There's also an extra OTP Secu.R...
Comment