Does anyone have a Dell alienware M17xr2 Bios dump ?
Desperately needed
If anyone can help it would be very much appreciated
Thanks
Ste
Desperately needed
If anyone can help it would be very much appreciated
Thanks
Ste
-
-
Re: Dell alienware M17xr2 Bios dump needed
Backup your bios first. Try and reportLast edited by Claudiomfa; 03-05-2020, 09:24 AM.
-
Hello guys i have a dell Alien ware m16 R1 that has boot loop.
It displays alien ware log then goes off and the sequence repeats its self.
board number: 213260-1 INFINITY RPL-HX+NV-P
S/N/ Service Tag: 3RZ0FS3
Reg model: P124F
Old file is attached
i need your help guys
thanks... -
Hi, I hope some one has some advice for me. I searched the forums but didn't see anything relevant. I acquired two identical Dell 9010 Mid Tower computers from a business office upgrade (they were going to throw them out). Both of them have the same motherboard (00F82W). One of them works flawlessly. The other one had a corrupted BIOS. I tried flashing numerous main BIOS and EC files from the internet, but none of them worked. I decided to copy the main BIOS and EC from the working 9010 computer and successfully flashed the corrupted BIOS. This got the computer able to boot again and run norm...04-23-2025, 04:30 PM -
Hi, I have an MSI PRO B660M-G DDR4 board with damaged BIOS and i need a bios dump from a real board, along with MAC, UUID and Serial Number info (eg. a BIOS screenshot and pictures from the board stickers).
I need to reconstruct the bios on my board, based on another bios image form a real board - meaning a bios image containing MAC address, UUID and Serial number. A stock BIOS is not suffiecient, as it is impossible to discover where the MAC, UUID and SerialNumber are stored. Tried with a similar board, but there are too much differences, and the stock BIOS is missing a lot of...11-17-2023, 10:56 AM -
i need dump bios dell vostro 3710 please help
Service Tag 2FL5NY3
CI bios
MX25L25635
MX25L12805... -
Hi everyone,
I'm trying to recover a Fujitsu Lifebook E5513 (most likely 2023 model) that was bricked during a BIOS update. The update was interrupted (probably due to power loss), and now the laptop is stuck in a boot loop showing "PBB rollback" / "SBB rollback" messages.
BIOS access (F2) and Boot Menu (F12) are no longer possible – the system instantly reboots after the rollback messages.
I extracted the official BIOS update package from Fujitsu (contains FJNB2FD.CAP, ~18.7 MB) and tried tools like UEFIExtract, but it seems to only contain...
Comment