hi everybody,
i need bios dump for hp spectre 13t. motherboard: P/N:01018YB00-35K-G;
THANK
i need bios dump for hp spectre 13t. motherboard: P/N:01018YB00-35K-G;
THANK
-
-
Re: need bios dump for hp spectre 13t 3000
here is my old bios if can help fixed it -
Re: need bios dump for hp spectre 13t 3000
Heres the full bios extracted from the HP bios update, plus your DMI .Comment
-
Re: need bios dump for hp spectre 13t 3000
thank you SMDFlea, i will try and let you knowComment
-
Re: need bios dump for hp spectre 13t 3000
unfortunatly , didn't work for me but state change.
maybe EC has problem. can you help me sending EC dump
thank you very muchComment
-
Re: need bios dump for hp spectre 13t 3000
Ec ,extracted from bios .Comment
-
Re: need bios dump for hp spectre 13t 3000
ok thank you for all, i'm going to try itComment
-
Re: need bios dump for hp spectre 13t 3000
Newer version of the bios - F.16 Rev.A
It's also compatible with HP Spectre 13 Pro Notebook PC:
https://support.hp.com/bg-en/drivers...R&ssfFlag=true for which the last available version at the support page is only F.14 Rev.A----------------------------------------------------------------------------------------------------------------------------------------------------------
All donations to Badcaps are welcome.
Become a Badcaps supporter
>>>>> click on this link to donate <<<<<
Thanks to all supporters.
----------------------------------------------------------------------------------------------------------------------------------------------------------Doctrina est fructus dulcis, radicis amarae..Comment
-
The Samsung S49CG934SU monitor does not power on - no LED indicator activity and no response to power button. However, when 21V power is connected, it immediately draws 0.8A of current with no display output. The motherboard processor gets warm, and there is continuous reading activity from the W25Q128BV BIOS chip.
Suspected Cause:
I suspect the BIOS may have been corrupted during a power interruption while updating the firmware. The official website provides firmware updates, but they can only be installed via USB flash drive.
Troubleshooting Attempts:
... -
Hello engineers 😀,
I’m kindly requesting a clean and unlocked BIOS dump for the following HP laptop, as it’s bricked after flashing SP152727. The system now keeps rebooting, and the original issue was an Administrator / Power-On Password that I can no longer access.😏
🔧 Device Info:
- Model: HP 15-da2007ne
- Product Number: 8XF55EA#ABV
- Serial Number: CND0338P0D
- CPU: Intel Celeron N4000
- EC/BIOS Chip: [Add chip number from the motherboard or BIOS chip]
💀 Problem:😅
- Device shows “Administrator Password”... -
Hi all,
My Samsung Galaxy Book 2 Pro 15.6-inch laptop has no display and won't boot.
The charging red LED lights up, but the charging screen doesn't show any indication.
When I press the power button, the blue LED cycles on and off three times, then the screen doesn't turn on, and the device won't boot.
(I've tried removing the battery and resetting the device, but the issue persists.)
NoteBook Model name : Samsung NT955XED-KK51G(Galaxy book2 pro, i5-1240p, 15.6inch AMOLED)
PCB model name : Venus2-15-5G(REV1.2), Venus2-15 ADL NPC
S/N : 5RNK9FFT70... -
Hi, I have an MSI PRO B660M-G DDR4 board with damaged BIOS and i need a bios dump from a real board, along with MAC, UUID and Serial Number info (eg. a BIOS screenshot and pictures from the board stickers).
I need to reconstruct the bios on my board, based on another bios image form a real board - meaning a bios image containing MAC address, UUID and Serial number. A stock BIOS is not suffiecient, as it is impossible to discover where the MAC, UUID and SerialNumber are stored. Tried with a similar board, but there are too much differences, and the stock BIOS is missing a lot of...11-17-2023, 10:56 AM -
Hello,
I'm requesting a full BIOS dump (including EC firmware) for an HP OMEN 17-an012nf laptop.
Details:
Model : HP OMEN 17-an012nf
Motherboard Part Number : DAG3BAMBAF0 REV : F
Serial Number (S/N) : 5CD7280D51
BIOS chip : Winbond W25Q64VSIQ
Programmer : EZP2023+
Issue : The motherboard is not powering on. Only the 5V rail is present. The 3.3V rail is missing because EN1 on the SY8286B remains stuck at 0V. This signal is driven directly by the EC/SIO. I replaced the 3.3V regulator and confirmed it's working.
I already...
Comment