HP Elite x2 1012 G2 fix BIOS password

[lapfix]

Re: HP Elite x2 1012 G2 fix BIOS password

good afternoon everyone, when desoldering the chip I have noticed a "bubble" that has come out on the board, can anyone tell me what it is?
Thank you very much

No pb , just clean it

https://www.youtube.com/shorts/hrXEzbQPsSk

[19dt]

Re: HP Elite x2 1012 G2 fix BIOS password

No pb , just clean it

https://www.youtube.com/shorts/hrXEzbQPsSk

Thanks you lapfix!!
I recently got the adapter I ordered for my ch341a with the 3.3v fix to safely access the wson-8 chip.
The issue is that I put it in my ch341a and it gets very hot in temperature.
Do I need any other adapter before?
Attached is a picture of the adapter.

[lapfix]

Re: HP Elite x2 1012 G2 fix BIOS password

Thanks you lapfix!!
I recently got the adapter I ordered for my ch341a with the 3.3v fix to safely access the wson-8 chip.
The issue is that I put it in my ch341a and it gets very hot in temperature.
Do I need any other adapter before?
Attached is a picture of the adapter.

maybe you insert bios chip in wrong position

[19dt]

Re: HP Elite x2 1012 G2 fix BIOS password

Good morning, thank you very much Lapfix, the computer is already working fine without password in bios.
Thanks for everything

[JULOX]

Re: HP Elite x2 1012 G2 fix BIOS password

Hello, a quick update, flashing the bios went well, the bin file on the
second post did not work on my chip but I did find one that did work.
now the bios is all ok and it has been updated to v135.

but now I have the problem of the ssd drive not showing up

The SSD (Solid State Drive) is not recognized and the following error is displayed:

Boot Device Not Found
Please install an operating system on your computer
Hard Disk - (3f0)

I think I need a new hard drive, anyone know if I need to change anything
in the bios?







Thanks for all your help.

where did you find a valid .bin file? can you share it?