File Type: rar HP 15 bw series LA-E841P Rev2.0.rar
it works. thanks
ENE is for EC? how can I reprogram that one?
I flashed another bin from another threat but it shows Manufacture Programing mode is in Unlock Mode and fan is running 100% all the time
ENE is for EC? how can I reprogram that one?
I flashed another bin from another threat but it shows Manufacture Programing mode is in Unlock Mode and fan is running 100% all the time
Any advice? thanks!
post the full name and model of the laptop and the backup of the original bios
Due to a lack of donations, server free space at a critical level, and possible closure of Bios Requests all donations are welcome, click:
Hello Again, I just flashed BIN from post 7, 08330
I shows 2 times "Flashing Boot Block" to 100% and then boots, still shows the message "Manufacture Programing mode is in Unlock Mode"
Also, it wont boot from any HDD, or USB now, it simply jumps to:
"Boot Device not found"
Hard Disk (3F0)
F2 System Diagnostics
If I hit F2 and go to HDD test, it shows SMART Test Pass and show a progress bar, so It is detecting a HDD apparently, It just wont boot from any device
No matter what I plug, HDD or SSD or USB , any advice?
I flashed this BIN file I got from a Discord group, It allowed me to boot and SSD and USB is detected, but Fan still 100% all the time, Fan Always On setting in BIOS is set to Disabled
And "Manufacture Programing mode is in Unlock Mode" also showing
Comment