HP ProBook 450 G3

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • lapfix
    replied
    Re: HP ProBook 450 G3

    Originally posted by master_clone33
    thanks for the new bios. is there any procedure specific after flashing and soldering it back on?

    clearing pram or soemthing by removing the 3V battery?

    What security tab are you talkign about?
    Yes yo should remove 3v battery before soldering the new dumb

    enter Bios setup : F10 and go/search to security tab , you will find reset security settings to default

    Leave a comment:


  • master_clone33
    replied
    Re: HP ProBook 450 G3

    thanks for the new bios. is there any procedure specific after flashing and soldering it back on?

    clearing pram or soemthing by removing the 3V battery?

    What security tab are you talkign about?

    Leave a comment:


  • lapfix
    replied
    Re: HP ProBook 450 G3

    Originally posted by master_clone33
    Hello, I need to fix the bios for HP Pro Book 450...

    DAX63CMB6D0
    REV
    Serial 5CD8396330

    MANY THANKS
    Go to security tab and reset security settings to default
    Attached Files

    Leave a comment:


  • master_clone33
    replied
    Re: HP ProBook 450 G3

    Hello, I need to fix the bios for HP Pro Book 450...

    DAX63CMB6D0
    REV
    Serial 5CD8396330

    MANY THANKS
    Attached Files

    Leave a comment:


  • faradaille
    replied
    Re: HP ProBook 450 G3

    Bios of dylen is the working bios

    Leave a comment:


  • ismaelstepheno
    replied
    Re: HP ProBook 450 G3

    this one work for me if some one need it
    Attached Files

    Leave a comment:


  • ismaelstepheno
    replied
    Re: HP ProBook 450 G3

    thank you hoaca388 i see en me analyzer that the backup sku is consumer LP
    and yours sku is corporate LP

    Leave a comment:


  • hoaca388
    replied
    Re: HP ProBook 450 G3

    Originally posted by ismaelstepheno
    Hi please i need a working dump for hp probook 450 g3
    mb : Dax63cmb6d1 rev d x63c
    black screen
    this is my backup
    all voltage ok
    I TRIED OFICIAL PAGE HP BUT ITS JUST 9MB AND I TRIED CLEAN ME BUT STILL THE SAME I THINK ITS CORRUPTED
    Try
    Attached Files

    Leave a comment:


  • hoaca388
    replied
    Re: HP ProBook 450 G3

    Originally posted by YOUN
    plz i need to fix my old bios for hp probook 450 G3 DAX63CMB8D0
    laptop can t display
    thank !
    Here
    Attached Files

    Leave a comment:


  • ismaelstepheno
    replied
    Re: HP ProBook 450 G3

    Hi please i need a working dump for hp probook 450 g3
    mb : Dax63cmb6d1 rev d x63c
    black screen
    this is my backup
    all voltage ok
    I TRIED OFICIAL PAGE HP BUT ITS JUST 9MB AND I TRIED CLEAN ME BUT STILL THE SAME I THINK ITS CORRUPTED
    Attached Files
    Last edited by ismaelstepheno; 10-18-2022, 06:05 AM.

    Leave a comment:


  • YOUN
    replied
    Re: HP ProBook 450 G3

    plz i need to fix my old bios for hp probook 450 G3 DAX63CMB8D0
    laptop can t display
    thank !
    Attached Files

    Leave a comment:


  • Masanori
    replied
    Re: HP ProBook 450 G3

    Originally posted by hoaca388
    HP ProBook 450 G3 Notebook PC
    Thank you very much! hoaca388!
    With the BIOS you repaired, my computer now boots! :-)

    Leave a comment:


  • sebawilq
    replied
    Re: HP ProBook 450 G3

    Working excellent magic

    Leave a comment:


  • hoaca388
    replied
    Re: HP ProBook 450 G3

    Originally posted by sebawilq
    Hi, can someone check it for me beeps 3 long 2 short, I try bios from forum, and they're turning with factory mode but without all id's of devices and other information. I presume that they n my old bios dump can anyone combine them, I attach my old bios that is not working.
    Serial number : 5CD5487Y75
    Attached Files

    Leave a comment:


  • sebawilq
    replied
    Re: HP ProBook 450 G3

    Hi, can someone check it for me beeps 3 long 2 short, I try bios from forum, and they're turning with factory mode but without all id's of devices and other information. I presume that they n my old bios dump can anyone combine them, I attach my old bios that is not working.
    Attached Files

    Leave a comment:


  • nagkhal
    replied
    Re: HP ProBook 450 G3

    thanks a lot it works, i had to find out system board ct number, feature byte, Build ID... i put all of those information. have some doubt about system board ct number.
    BUT IT WORKS THANKS TO YOU!!

    Leave a comment:


  • hoaca388
    replied
    Re: HP ProBook 450 G3

    Originally posted by nagkhal
    Hi there i need help with this dump, and shema wil be ok
    mobo nomber is:
    DA0X63MB6H1 REV:H
    ProBook 450 G3
    Attached Files

    Leave a comment:


  • nagkhal
    replied
    Re: HP ProBook 450 G3

    Hi there i need help with this dump, and shema wil be ok
    mobo nomber is:
    DA0X63MB6H1 REV:H
    Attached Files

    Leave a comment:


  • nagkhal
    replied
    Re: HP ProBook 450 G3

    HP probook 450 G3 DA0X63MB6H1 REV H, please need help with my bios Dump, wont boot with my corrupted bios.
    thank you
    Attached Files

    Leave a comment:


  • leo042188
    replied
    Re: HP ProBook 450 G3

    Originally posted by hoaca388
    HP ProBook 450 G3 Notebook PC
    Not Work Bios

    Leave a comment:

Related Topics

Collapse

  • Ahari
    Request HP Proliant Microserver Gen 8 (J06) BIOS dump to restore system firmware
    by Ahari
    Hi all,

    This is my first post here (I am very new to forums!) and I hope someone can help. I am looking for a full dump of the BIOS of a HP Proliant Microserver Gen 8 so that I can get this mini server running again. (BIOS version J06 2019-04-04, chip 25Q064A). I think my board was partially bricked after a failed BIOS update.

    I got it second hand in this state and all the normal attempts at bios restoration have not worked. I have even desoldered the chip and tried to load the actual BIOS from HP, but it is missing some parts needed to boot the system.

    I...
    08-13-2025, 06:12 AM
  • Habble7
    I need a BIOS dump for the Samsung S49CG934SU monitor
    by Habble7
    The Samsung S49CG934SU monitor does not power on - no LED indicator activity and no response to power button. However, when 21V power is connected, it immediately draws 0.8A of current with no display output. The motherboard processor gets warm, and there is continuous reading activity from the W25Q128BV BIOS chip.

    Suspected Cause:
    I suspect the BIOS may have been corrupted during a power interruption while updating the firmware. The official website provides firmware updates, but they can only be installed via USB flash drive.

    Troubleshooting Attempts:
    ...
    05-22-2025, 07:28 AM
  • studdy05
    Bricked HP Probook 450 G7 Bios questions
    by studdy05
    Hp Probook 450 G7 s# SCD0348W35 had a locked BIOS. Bought BIOS and EC chips off Ebay that were supposed to match this machine - the 450 G7. Flashed in the BIOS on chip i bought using a CH341. BIOS unlocked next boot. Some error to contact HP. Entered BIOS and reset to system defaults and rebooted. Machine worked fine but every cold boot the contact HP message popped and everything else worked as fine. Assumed the error was from EC chip not matching BIOS that i just flashed in. So i flashed in the EC that was supposed to match from the EBay chip i bought and instant brick.

    Ive got...
    07-08-2025, 09:24 PM
  • haitham sharabati
    [Request] Clean BIOS dump for HP 15-da2007ne (8XF55EA#ABV) - N4000 - BIOS Lock
    by haitham sharabati
    Hello engineers 😀,

    I’m kindly requesting a clean and unlocked BIOS dump for the following HP laptop, as it’s bricked after flashing SP152727. The system now keeps rebooting, and the original issue was an Administrator / Power-On Password that I can no longer access.😏

    🔧 Device Info:
    - Model: HP 15-da2007ne
    - Product Number: 8XF55EA#ABV
    - Serial Number: CND0338P0D
    - CPU: Intel Celeron N4000
    - EC/BIOS Chip: [Add chip number from the motherboard or BIOS chip]

    💀 Problem:😅
    - Device shows “Administrator Password”...
    08-07-2025, 04:54 AM
  • Citymin
    NT955XED (Samsung Galaxy Book2 Pro - 15.6) BIOS dump file Request
    by Citymin
    Hi all,

    My Samsung Galaxy Book 2 Pro 15.6-inch laptop has no display and won't boot.
    The charging red LED lights up, but the charging screen doesn't show any indication.
    When I press the power button, the blue LED cycles on and off three times, then the screen doesn't turn on, and the device won't boot.
    (I've tried removing the battery and resetting the device, but the issue persists.)

    NoteBook Model name : Samsung NT955XED-KK51G(Galaxy book2 pro, i5-1240p, 15.6inch AMOLED)
    PCB model name : Venus2-15-5G(REV1.2), Venus2-15 ADL NPC
    S/N : 5RNK9FFT70...
    08-05-2025, 05:12 AM
  • Loading...
  • No more items.
Working...