you got it
-
-
La-c021p need kbc rom
KB9012QF KBC ec dump please... help me.. -
Re: La-c021p need kbc rom
Try these,extracted from 11-p015wm (La-c021p) bios update.Comment
-
HP Stream X360 kbc upload
friends
I want to install APT10 LA-C021P REV-1.0 kbc, but my
programmer does not have this model, which option can I install?
Vertyanov JIG ver 4.B
kb9012qf 4a how to tie
thanksAttached Filesif you find these attachements useful please consider making a small donation to the site
Comment
-
-
Re: HP Stream X360 kbc upload
Check number of pins on kbd connector, spacing between pins eg 0.8mm or 1mm and then try selecting any other board with same pin count/spacing.Comment
-
Re: HP Stream X360 kbc upload
kbc9012 asked uploaded connected and solved this way
LA-C021P KSO3=7 KSI4=16 KSI7=13 KSI6=24 KSI5=17
Thank you for your interest
28pin ffc
closedLast edited by asliyucegsm; 12-08-2020, 08:13 AM.Comment
-
Hello,
the BIOS update was interrupted in between and now the laptop no longer starts.
Can you please clean my BIOS Dump :-)
Model: Dell Inspiron 14 5485
Cpu: AMD Ryzen 5 3500U with Vega 8
Mainboard: Bucky Bensolo AMD 18796-2 RJ57P$LA
Service Tag: 89NVGW2
------
@Vesko356 -> Post updated with the correct data ;-)... -
Hi,
sometimes we need to clean the me of a bios dump. But isn't it the same when i do a ME Update from windows? There are updates files on most manufacturer pages. -
Hello,
i have an zbook 17 g3, i updated the bios, but the computer crash during update
now black screen
may you repair my bios in order to have work bios but keep all hp information (DMI sn..)
dump attached,
big thank you !!!... -
Dear all,
I have a ASUS ZenBook UX480F with the following symptoms:
I suspect it is a BIOS issue. So I decided to try to clean the ME region. I followed the guide on win-raid, and I believe I have done everything correctly. My problem is: when I open the outimage.bin in ME Analyzer, it says that it is Extracted, and not Region, Extracted as it should be. Is it normal, or did I do something not correctly? This is my first experience editing BIOS files.
I would appreciate if someone could take time to explain the issue, so that I can learn. But I would... -
Hi all,
I have a interesting question but does anyone know the following.
If i flash a tv with a firmware update and then i remove the memory ic 25Q32BVSIG, a 4mb SPI chip and read the contents with my programmer and compare the two image files (Dump versus firmware) are they going to be identical.
What I want to get at is that if I have a firmware update and I try to download it directly into the SPI chip will it be successful? Will it work. So far I never tried it because I assumed it will not be the same. Anybody know?
Regards
Angelos
Comment