Hi Friends ,
need unlocked bios dump of Panasonic FZ-G1 : DFUP2371ZE
or if someone can unlock original file attached,
THANX
need unlocked bios dump of Panasonic FZ-G1 : DFUP2371ZE
or if someone can unlock original file attached,
THANX
-
-
Re: Need Panasonic FZ-G1 Bios DFUP2371ZE
bismillahThere are 10 types of people in the world. Those that understand binary and those that don't. -
Re: Need Panasonic FZ-G1 Bios DFUP2371ZE
Hi Friends ,
Need unlocked bios dump of Panasonic DFUP2371ZE
or if someone can unlock original file attached,
Thanks.Last edited by Sashajkl; 06-01-2020, 04:36 AM.Comment
-
Re: Need Panasonic FZ-G1 Bios DFUP2371ZE
Is it possible to take bios from the second post and put it on my laptop?Comment
-
-
Re: Need Panasonic FZ-G1 Bios DFUP2371ZE
I have a ch341a programmer. Previously, they were flashing other laptops and everything was fine. Firmware version CH341A Programmer
1.34. I evaporate the chips before the firmware. When checking the buffer, it throws an error on FZ-G1. There is also a program NeoProgrammer 2.1.0.16. In it, a buffer check passes. I was stitching the latest dumps of this tablet with it. But the tablet has a black screen. Only indicators work. Maybe there is a problem with my programmator?Comment
-
Re: Need Panasonic FZ-G1 Bios DFUP2371ZE
I think the problem is either in the programmer or in the program. I soldered the Bios chip. The program erases, checks for a dummy, writes. But when it comes to checking, the program says that the buffer does not match. That was all my attempts.Comment
-
Re: Need Panasonic FZ-G1 Bios DFUP2371ZE
Hi. I think the problem is in my programmer. This week I plan to purchase ezp2010.Comment
-
Re: Need Panasonic FZ-G1 Bios DFUP2371ZE
Hi. Thank you for helping me all this time. I do not know the version of my ch341a programmer. But I took a photo on both sides.Attached Filesif you find these attachements useful please consider making a small donation to the site
Comment
-
-
Re: Need Panasonic FZ-G1 Bios DFUP2371ZE
Hi. Today I purchased the ezp2010 programmator. From the first time it turned out to flash your last Bios. The one that has the title "New". This miracle finally happened. I am very grateful to you. Without you, I would not have succeeded. 😄😄😄👍👍👍Comment
-
Re: Need Panasonic FZ-G1 Bios DFUP2371ZE
One driver throws an error. Also, because of this error, it does not allow updating bios through windowsAttached Filesif you find these attachements useful please consider making a small donation to the site
Comment
-
-
Hello. I am asking you for a hint on how to solve the problem with my touchbook Panasonic CF53-2 standart model. After setting up the BIOS, the laptop displays the wrong image until Windows loads. (More precisely, it displays, but distorted, instead of the Panasonic image immediately after turning it on, it displays what is in photo #1 in the attached file) Then the image appears when Windows starts loading and then there are no problems with the screen until the reboot. If you enter the BIOS, just a black screen. If you connect an external screen, the image on it is the same as on the built-in... -
Good day,
I have tried to remove BIOS supervisor password from Panasonic Toughbook CF-33 mk1. Model number CF-33AENABTG, unfortunately I don't have any other info.
I read the BIOS using afuwin, edited it and tried to flash new edited BIOS using afuwin. Unsuccessfully. Afuwin showed "Error: Problem erasing flash." starting with 0x00040000 and stoped. Then I tried many other options to flash BIOS from Windows without any luck. Finally i rebooted the device - and no post. Afterwards I have read the corrupted bios chip (MX25L12873F) using EZP2010 programmer.... -
Hello everyone,
I’m currently working on a dead MSI GP75 Leopard (MS-17E71) motherboard (i7 CPU, NVIDIA GPU) with a no display/no backlight issue initially. After extensive investigation, I’m at a critical stage involving EC firmware, BIOS/ME region interaction, and possible deep corruption. I'm seeking advanced insight from anyone with experience in EC/BIOS sync issues or PCH-level behavior. Here’s a full breakdown:
🧩 Initial Issue- Board powers on (fans spin, keyboard lights up and can be adjusted, caps lock led lights), but no display or backlight
- External display (HDMI) shows
07-24-2025, 02:17 PM -
Hello everyone,
I recently bought a non-working Asus Zenbook Pro Duo OLED UX8402ZA that was listed for parts only. The seller mentioned that it had no display output but that the charging lights worked.
When the laptop arrived (without a charger and SSD), I connected a charger and confirmed with a multimeter that it was charging the battery. However, when I tried to power it on, only the backlight of the secondary display came on. There was no image, and it didn’t boot into the BIOS.
I decided to try flashing a new BIOS, but since I didn’t want to desolder... -
First of all thanks to all of our members who have posted previously all methods posted here.
Please leave a comment if you find something new,or have anything else to add.
-----------------------------------------------------------------------------------------
Find by serial number,model number or series
If you know the laptop serial or model number go to HP support https://support.hp.com/us-en/drivers/laptops .
Enter the serial number or model number and click submit.On the next screen you will have to enter the OS
Operating system and OS version.If...
Comment