Hello, i am looking for working bios for this ogic board: LA-9531P. (acer v5we2)
thank you
thank you
-
-
Due to a lack of donations, server free space at a critical level, and possible closure of Bios Requests all donations are welcome, click:
>>>>> https://www.badcaps.net/index.php?pageid=donate1 <<<<<
Every donation made will go towards server fees and maintenance costs. -
Re: Acer v5we2 Bios needed
Thank you peste for fast reply.
i am quite new for bios flashing
E1-572G_v5we2_la9531p.rar is that file compatible with my acer?
as board model is exact same, but acer model is different?Comment
-
Re: Acer v5we2 Bios needed
Make a copy of your bios and test the new bios, what model of Acer do you have?Due to a lack of donations, server free space at a critical level, and possible closure of Bios Requests all donations are welcome, click:
>>>>> https://www.badcaps.net/index.php?pageid=donate1 <<<<<
Every donation made will go towards server fees and maintenance costs.Comment
-
Re: Acer v5we2 Bios needed
Acer v5-561g-54208g1TMaik
Z5WV2Comment
-
Re: Acer v5we2 Bios needed
try...Due to a lack of donations, server free space at a critical level, and possible closure of Bios Requests all donations are welcome, click:
>>>>> https://www.badcaps.net/index.php?pageid=donate1 <<<<<
Every donation made will go towards server fees and maintenance costs.Comment
-
Acer V5-561G V5WE2_LA-9531P_Rev 1A
Gpu:216-085500Comment
-
Comment
-
Hi everyone, I hope to find some saint here who can give me some support..
I'm working on this same mainboard.
I though I was facing a corrupted bios repair but now I'm not that sure anymore..
I tried to flash all version posted here with no luck.
Considering that I'm programming this chip QH64-104HIP as a EN25QH64 with a CH341a, is it possible that the chip is damaged even if the verify is ok? (I also can read the chip with no problems).
This is the situation:
Black screen at power up.
Only power, VGA and USB keyboard are connected at the moment.
Stand-by LED does not light up.
Blue LED light up after pressing the power button.
No LED and no button working on the USB Keyboard. The 5V power at USB is present.
5V and 3V are present at usual points.
No shorted capacitors (I've tested one by one)
No component gets unexpectedly hot after powering-on.
I've also removed the two coils and moved the resistor in order to convert to UMA so the GPU is not powered anymore..
Any suggest?
Thanks a lot in advance.Last edited by Byronfool; 02-06-2025, 10:06 AM.Comment
-
Due to a lack of donations, server free space at a critical level, and possible closure of Bios Requests all donations are welcome, click:
>>>>> https://www.badcaps.net/index.php?pageid=donate1 <<<<<
Every donation made will go towards server fees and maintenance costs.Comment
-
Thanks peste for answering.
Actually I'm still hoping this is a bios matter.. and still hoping to get a confirm about the chip.. does anybody faced a situation where even if the chip is damaged the verify is ok after programming it?
I wrote those additional info about this repair just to better picture the situation.
Here attached the dumped file and mainboard data.
Again thanks for any answer.Attached FilesComment
-
-
Hello everyone,
I need help with my Acer Aspire 5920G laptop. Its original GeForce 8600M GT graphics card failed, so I replaced it with an Nvidia GeForce 9600M GT MXM card.
**Problem:** The laptop powers on, but there is no display (black screen) on either the internal LCD or external monitor. This indicates a BIOS compatibility issue with the new graphics card.
**What I have tried so far:**
1. I have my **original stock BIOS dump (1MB .BIN file)** from my laptop, which works and allows the laptop to power on normally (but no display with 9600M...07-02-2025, 02:31 PM -
I have an Acer Aspire 1 A115-32-C28P laptop that tries to boot for 5s and then shuts off. (Mobo name GH5JJ/GH7JJ LA-K701P Rev C1)
I suspect the BIOS might be the issue, but ACER website doesn't come with a BIN file, only an EXE that doesn't contain the full image. I tried searching for a BIOS bin but no luck.
I have attached both the bios i read from the chip and the latest ACER bios. Thanks for any help in advance!... -
I have an Acer veriton Z4660G all in one pc,
Model: Z4660G-I5850H1 (VZ4660G_W)
Need bios dump and schematic would save my life !
to make a long story short I bought this all in one used
with a broken lcd, with the objective of making a custom desktop out of it
,it was working perfectly but unfortunately this motherboard default settings does not show post or bios on external screen, I tried everything and every cable/port/screen also ext gpu or internal i also tried to navigate blindly because I could access bios without seeing... -
Sublect line continuation: ... Jaguar IDS PC aka Panasonic
>Read BIOS guides, methods, resources and tools
>
Ack
>Try the method at BIOS guides, methods, resources and tools before requesting help
>
Ack
>Explain you were not able to succeed with the methods at BIOS guides, methods, resources and tools
>
python ./main.py "/mnt/c/temp/205605f9e1b60403a41787efeffe9cad-flas_maybe5.BIN" --output-dir "/mnt/c/temp/205605f9e1b60403a41787efeffe9cad-flas_maybe5.txt"
------------------------------------------------... -
Hi,
My daughter has accidentally managed to kill her Acer gaming desktop it has a blank screen after updating and when you press the power button the fans spin, light comes on and it makes 1 long and 1 short beep and no attempt to boot.
All basic troubleshooting has been done we replaced CPU, GPU and RAM from a working machine and no joy, I also noticed a post on here with the same issue and it was the BIOS. I am pretty sure also because it was doing a BIOS update that stopped it working, she knocked the keyboard out by accident during the update and the screen just went...
Comment