Hellow. Does anybody have an SMC.bin file to switch on the Manufacturer Programming mode on in my laptop ?Its start with missing serial, pruduct id numbers and wanna rewrite the values. Thank You
-
-
Re: HP 640 g1 smc file
Smc.bin its not a free other dmi sn,pn is possible to fix edit bios dump -
Re: HP 640 g1 smc file
Thank You for the quick reply Imranromi.What is Your suggestion, is there any way to switch on the MPM mode or just left the way to remove the bios chip and rewrite?Comment
-
Re: HP 640 g1 smc file
Hmm yes you need tool bios programmer for read chip.Comment
-
Re: HP 640 g1 smc file
I tried to install the Bios Config utility and unlock it again but no luck
Thanks for the HelpComment
-
Re: HP 640 g1 smc file
Hellow again, i tried the new bios for my laptop, after i got the machine is not committed state message. Can anybody just open for me the old bios file what i have? I just need just to fill the parameters with the HP Dmi tools program.Comment
-
-
Re: HP 640 g1 smc file
This is the old what was originally , and its works for me just forgot all the parameters after when the electricity went off...
Comment
-
Re: HP 640 g1 smc file
That what we started the discussion a week ago, i need to refill the parameters of the machine again,but the mpm state is locked...Comment
-
Re: HP 640 g1 smc file
Try this file add info file is my serial number or other info
2nd file is you add own serial number Use wndmifit toolComment
-
-
Due to a lack of donations, server free space at a critical level, and possible closure of Bios Requests all donations are welcome, click:
>>>>> https://www.badcaps.net/index.php?pageid=donate1 <<<<<
Every donation made will go towards server fees and maintenance costs.Comment
-
Re: HP 640 g1 smc file
You want what?mpm why want you unlocked.
My file give any error?Comment
-
Re: HP 640 g1 smc file
Where is your information.You have old bios post here i will replace you dataComment
-
Hello,
I got a Lenovo ThinkStation P520 (Type 30BF) from a friend, asking me for a repair. Windows 11 offered a firmware upgrade as an optional update, and it failed.
The emergency flash procedure from the hardware manual has also failed. So, I asked an acquaintance with better skills to flash the BIOS directly.
However, the chip (a Macronix MX25L25673GMI-08G) has a size of 32 MB, and the BIOS file from the Lenovo website (extracted with UEFITool) has a little more than 16 MB. Thus, the software my acquaintance used (SiberiaProg v1.45, with a CH341A Programmer)... -
hi everyone
i need dump file for dell server r220
i have download Flash BIOS executable file but i dont know how to conver it to Bin file
i have check on youtube there is some programs are doing this method of creating Bin file from ExE file .
if anyone has this method please need his supporting .
all the best
EXE file is attched and Original Bin file from the Bios Chip is attached also
and dell website "https://www.dell.com/support/home/en-us/drivers/driversdetails?driverid=mrxv... -
Hello to all of you! I need help with a BIOS file.
The BIOS chip is fried on my Asus F542UN laptop, and I bought a new chip that needs programming. I have a CH341a programmer but I need a .bin BIOS file. On Asus support page the firmware has another extension, .310 and from reading on this forum I understand that that file is not complete BIOS.
So, in short I need the "complete" BIOS .bin file to flash on the new chip. Another issue is that on back of the case the label says F542UN but on the sticker on the motherboard it's X542UN. -
Hello Everyone,
I have Thinkpad T560 Which has corrupted BIOS. I have acquired Ch341A SPI flasher to program the BIOS externally. I see that to program the BIOS, i need a bin file for the BIOS. I was able to extract the .exe file of BIOS from Lenovo given here in this link:
https://pcsupport.lenovo.com/au/en/p...me=BIOS%2FUEFI
In the extracted files, I see that BIOS containing file has extension .FL1 and I need to extract or convert it... -
Hi,
Sorry if this is posted in the wrong section.
I need to decrypt a .keychain file. The methods listed on github (https://github.com/n0fate/chainbreaker) unfortunately dont seem to work. Im getting stuck on the first bit,- Navigate to the directory containing the file setup.py
- Enter the command (from terminal): $ python setup.py bdist_wheel -d dist. This creates a wheel file (extension: .whl) in the /dist folder.
zsh: command not found: python
qashifmasud@Qashifs-MacBook-Pro...10-12-2024, 02:31 AM
Comment