Need bios & ec from BDL50 LA-D704P REV:4.0 for HP

[piszpunta]

Re: HP 15-be012tu bdl50 la-d704p rev 4.0

after programming KBC https://www.badcaps.net/forum/showthread.php?p=892451 POST#11 pwr LED is on.
I need KBC dump

[SMDFlea]

Re: HP 15-be012tu bdl50 la-d704p rev 4.0

after programming KBC https://www.badcaps.net/forum/showthread.php?p=892451 POST#11 pwr LED is on.
I need KBC dump

Your bios i.d. BID is 081EC ,flash a clean bios from post #9 in this thread - https://www.badcaps.net/forum/showthread.php?p=739852

Flash this EC extracted from that bios . If you still can`t boot the problem is somewhere else, check AD_ID the middle pin id .

[piszpunta]

Re: HP 15-be012tu bdl50 la-d704p rev 4.0

Your bios i.d. BID is 081EC ,flash a clean bios from post #9 in this thread - https://www.badcaps.net/forum/showthread.php?p=739852

Flash this EC extracted from that bios . If you still can`t boot the problem is somewhere else, check AD_ID the middle pin id .

thank you very much.
everything works

[mehdisfr]

Re: Need bios & ec from BDL50 LA-D704P REV:4.0 for HP

Here`s your bios,its a full bios extracted from the hp update with your win key added.

thank you very much.
everything works:مجموعة:

[techcornertrip]

Re: Need bios & ec from BDL50 LA-D704P REV:4.0 for HP

https://********************/product/hp-15-bd-la-d704p/

its working thanks bro. GODBLES

[marcelohugo]

Re: HP 15-be012tu bdl50 la-d704p rev 4.0

Need Bios dump AND KBC HP 15-be012tu

MOTHERBOARD : bdl50 la-d704p rev 4.0
CPU : SR2UW Intel i3-6006U
GPU NONE ONLY INTEL
KBC : ENE KB9022Q D

MY ORYGINAL BIOS DUMP HERE

its working thanks bro. GODBLES

[tyso]

Re: HP 15-be012tu bdl50 la-d704p rev 4.0

Thanks it worked for me but with few seconds delay

[geniusDoc]

Re: Need bios & ec from BDL50 LA-D704P REV:4.0 for HP

1.424 / 5.000
Risultati della traduzione
star_border
Hello, I apologize for my English but I am using a translator.

I'll explain my problem if someone with a good heart can help me.

Introduction I have an HP 250 G5 laptop, with a la-d704p rev.4.0 motherboard inside (not working due to power supply problems) I have recovered 2 similar cards on the internet but which should be compatible, both are la-d703p rev.3.0 , the two cards of which the retailers confirm to me are 100% working, but once mounted with both cards the caps lock flashes 3 times, the fan turns but the PC does not start with a black display. I tried to extrapolate with the CH341A programmer with CH341A Programmer v1.44 software the original bios and also enter some found on the internet but with some bios the flashes went from 3 to 1 and the fan turned on for a very short time, with others always the same problem of 3 flashes and the fan operated in a regular way. I am forced every time to unsolder the cip otherwise the programmer does not recognize it.

I hope I have succeeded in explaining my experiments in these lines, being a beginner, but I just like to experiment, I kindly ask if you can help me understand if I'm all wrong and if my reasoning is wrong.

I attach the original bios extrapolated from the cip of the original card and the bios of one of the two cards purchased from the internet.

[hoaca388]

Re: Need bios & ec from BDL50 LA-D704P REV:4.0 for HP

HP 250 G5 Notebook PC
DMI : 210000h -> 210FFFh
Your BID : 081EF but you can try other.

[geniusDoc]

Re: Need bios & ec from BDL50 LA-D704P REV:4.0 for HP

thank you very much, as soon as I can I will try them all.

[metropolisystem]

Re: Need bios & ec from BDL50 LA-D704P REV:4.0 for HP

Here`s your bios,its a full bios extracted from the hp update with your win key added.

thanks, its work perfectly

[fiagah]

Re: Need bios & ec from BDL50 LA-D704P REV:4.0 for HP

Friends, my board BDL50 LA-D704P REV:4.0, stopped powering up after restarting it ten times, just because I ignore keyed in information like feature Byte, Build ID etc. after replacing KB9022Q D and programming it with EC bios.
pls help

[thanhthuong28786]

Re: Need bios & ec from BDL50 LA-D704P REV:4.0 for HP

Here`s your bios,its a full bios extracted from the hp update with your win key added.

its working ok with me. thanks