looking for the bios dump of this model..thanks..
Dell Inspiron 14 (Iris BTM MB 14214-1)
Dell Inspiron 14 (Iris BTM MB 14214-1)
-
Never stop LEARNING because life never stops TEACHING! -
Re: Iris BTM MB 14214-1 bios dump
Upload your backup, maybe someone will help you. -
Comment
-
Re: Iris BTM MB 14214-1 bios dump
update: flash the bios with dump from the net.
still the same symptoms:
no video
when you put the power adapter the cpu fan spins and turn on all the power with led light on,
after that the led light will die together with the cpu fan but all the power are present, the 3.3vdc, 5.1vdc 1.35vdc,
2.7vdc in the battery section since there is on battery attached
1.8vdc s5 VCC for bios 25Q64FWSIG, cpu power is .9vdc .8 vdc and 1vdc . because the cpu fan die the cpu is heating up. any suggestion.
since the model schematic is not available. i can't get any schematics that is identical to this model. any help or suggestion guys.. thanks
Never stop LEARNING because life never stops TEACHING!Comment
-
Re: Iris BTM MB 14214-1 bios dump
Try this bios extracted from dell update,with a clean TXE area.This has no DMI info included.Last edited by SMDFlea; 03-13-2019, 06:34 AM.Comment
-
Comment
-
Re: Iris BTM MB 14214-1 bios dump
please test and update usComment
-
Re: Iris BTM MB 14214-1 bios dump
thanks for the bios dump..
i tried smdflea and ziggster given bios dump
still the same symptoms.. i think the bios ic is the failed component cause when i verify the written data the bios programmer gives a error in address 0000 like that. ill try to buy the 25Q64FWsig bios and ill keep you posted for the progress. thanks a lot guys..Never stop LEARNING because life never stops TEACHING!Comment
-
Re: Iris BTM MB 14214-1 bios dump
i have same problem 8beep sound only come no display.bios reflash.same problem help mwComment
-
Re: Iris BTM MB 14214-1 bios dump
This bios chip is 1.8V. have you taken that into consideration??Comment
-
Re: Iris BTM MB 14214-1 bios dump
thanks sorry for the very late response. i already fixed it replacing the bios eprom. i program it using adapter for 1.8 volts with my ezpro2010. thanks for the help guys...
Never stop LEARNING because life never stops TEACHING!Comment
-
Comment
-
RULES UPDATE for BIOS requests/offers AVOID BANNING, READ BEFORE POSTING
https://www.badcaps.net/forum/troubl...before-posting
You MUST:- Provide the full machine model number, serial number (or Service tag, SNID) and the board model number (see https://www.badcaps.net/forum/showthread.php?t=88758 ) ,The serial number, make, full model number, motherboard model and revision (except QR codes) must be written/typed at your request as per the rules. Not as a picture, part of the file name and so on.
-
-
Need your help guys! DELL IRIS BTM MB 14214-1 PWB 1JTN6 REV A00 bios or clean ME
all AO or ALW voltage present 3.3v and 5v 1.8v VCC present in EEPROM , 3.3v VCC present in NPCE985PB10 I/O,
power button pin 2 has 3.3v and will drop to zero when power button is pressed.
Model # Dell Inspiron 14 3451 14214
SERVICE TAG SN: BSQND32
attached is my extracted bios.
Thanks again in advanceLast edited by Duranitron; 11-24-2024, 09:22 PM.Never stop LEARNING because life never stops TEACHING!Comment
-
----------------------------------------------------------------------------------------------------------------------------------------------------------
All donations to Badcaps are welcome.
Become a Badcaps supporter
>>>>> click on this link to donate <<<<<
Thanks to all supporters.
----------------------------------------------------------------------------------------------------------------------------------------------------------Comment
-
The Samsung S49CG934SU monitor does not power on - no LED indicator activity and no response to power button. However, when 21V power is connected, it immediately draws 0.8A of current with no display output. The motherboard processor gets warm, and there is continuous reading activity from the W25Q128BV BIOS chip.
Suspected Cause:
I suspect the BIOS may have been corrupted during a power interruption while updating the firmware. The official website provides firmware updates, but they can only be installed via USB flash drive.
Troubleshooting Attempts:
... -
Hi, I have an MSI PRO B660M-G DDR4 board with damaged BIOS and i need a bios dump from a real board, along with MAC, UUID and Serial Number info (eg. a BIOS screenshot and pictures from the board stickers).
I need to reconstruct the bios on my board, based on another bios image form a real board - meaning a bios image containing MAC address, UUID and Serial number. A stock BIOS is not suffiecient, as it is impossible to discover where the MAC, UUID and SerialNumber are stored. Tried with a similar board, but there are too much differences, and the stock BIOS is missing a lot of...11-17-2023, 10:56 AM -
g1 assassin Rev 1 bios dump - main and backup needed
main and backup ic dead so i cant post corrupt bios cause its 01 all over.
thanks
01-23-2024, 03:26 AM -
This laptop is the same laptop I was working on in this thread and I wasn't sure if I should post a new topic or post in that thread because I already solved the issue that thread was discussing and this is a completely different issue although it is dealing with the same laptop. I decided to make a new thread since it's a new issue, but please move if I made a mistake.
Motherboard model number: DA0PAMB46A1 REV: A
Secondary motherboard model number: 0PAB
SKU: 685K4UA
Serial number is: 5CD3223BJP
Recently reflashed this laptop with latest BIOS and once... -
Hi,
I need a BIOS dump for MSI Z590 PRO WIFI from a real physical board, along with MAC address and serial no.
It must be a dump from a physical board, as it contains personalized data eg. MAC Address, UUID, Serial no.
I have a board which has lost the BIOS contents, I have the MAC and serial to this board, and need to insert it into the another BIOS image. To do it, I need to have a real image from a real board, as the images from the MSI site are without this data. The only way to find where MAC/UUID/Serial is located in the BIOS is to have a bios...11-06-2022, 05:22 PM
Comment