MSI cr400

mahmoodjavan

Banned

Join Date: Mar 2018

Posts: 584

Country: iran
#1

MSI cr400

12-16-2018, 03:05 AM

MS-1451
MB: MSI MS-14511 ver: 1.2
EC: ENE KB3925QF B1
Main Flash: Winbond 25X80AVS1G SOIC-8 (AMI EFI)
EC Flash: MX 25L512MC SOIC-8
----------
einjoy
Attached Files

MSI MS-14511 ver 1.2.rar (871.5 KB, 101 views)

Last edited by mahmoodjavan; 12-16-2018, 03:18 AM.
Tags: None

Previous template Next

Winbond 25Q16JWNIG – Asus ROG Strix Scar 18 G814JZ bricked after wrong flash – Need help

by Vincent Kahle

Hi everyone,

I hope someone can help me.
I have an Asus ROG Strix Scar 18 (G814JZ) laptop with a Winbond 25Q16JWNIG chip on the motherboard.

Unfortunately, I flashed the wrong file (BIOS/EC/other region – I'm honestly not sure anymore), and now the laptop is completely dead: no display, no fan spin, no reaction at all.

I have a CH341A programmer and I'm able to read and write to the chip. However, I'm not sure which software is best (AsProgrammer, NeoProgrammer, etc.) or if there's anything specific I should watch out for.
A valid BIOS/EC backup...
- Channel: BIOS Requests ONLY!
06-05-2025, 09:27 PM
[Help] Lenovo Yoga Slim 7-14ARE05 (DA0LS3MBAF0) – 25Q80DVN1G Flash Is All FF, USB-C PD Stuck at 5V

by ekozeko333

Hi all,
I’m trying to recover a Lenovo Yoga Slim 7-14ARE05 with board DA0LS3MBAF0 Rev:F. I’ve run into an unusual issue where USB-C PD is stuck at 4.7–5V and the system won’t boot (keyboard lights flash briefly, then nothing).
🔥 The Problem Started After Suspected ESD/PD Fault
I experienced a power issue or ESD event through a USB-C charger
After that, the NX20P5090 power switch was visibly burned and was replaced
Now the PD controller always negotiates 5V @ 2A, even with known-good chargers
🧠 What I’ve Done So Far
Flashed...
- Channel: BIOS Requests ONLY!
06-21-2025, 02:48 AM
Nikon D800 camera - flash don’t work and capacitor don’t charge

by corrize

Hello, I'm stuck in troubleshooting…
The flash system works like that : when the (mechanic) flash button is pressed, the flash mecanically pop up, and a circuit buck boost elevate 7v (batt) to 200-300v (?) for charging the big capacitor. And when the photo shoot button is pressed, the capacitor is discharged in the xeon light.

In the D800, there is a first « power board » close to the battery. 2 wires (batt 7v) goes to another little « flash board ». I measured 7v, so ok.
When I press the flash button, it's detected by the system, flash icon appear on LDC display....
- Channel: Troubleshooting Printers, Copiers, Scanners and other Imaging & Printing Devices
10-01-2022, 10:02 AM
Majority PETERHOUSE GRADUATE Internet Radio (Auna Silver Star) - Stuck at boot "Welcome" Screen

by praveenramavath

Hello All,

I have an issue with my Majority PETERHOUSE GRADUATE Internet Radio, it keeps rebooting at the boot logo Welcome screen. I have an another forum active in other website but due to lack of response I am posting the same here. I am positing a link below that has pictures including all the troubleshooting I have tried, appreciate if someone can take a look and give me any suggestions.

https://www.hifivision.com/threads/m...-screen.98243/

Troubleshooting Summary: Majority Internet Radio - Flash Chip...
- Channel: Troubleshooting Audio Equipment
04-26-2025, 09:08 AM
Request BIOS files to flash Toshiba C55-A-1TX laptop

by YvD-Electronics

Hi all,

I need the BIOS (bin files) to re-flash the BIOS chips on a toshiba laptop.

Why I am pretty sure I need this to repair?

1) Power supplies seem OK.

2) Battery has been replaced, is charging well ... also not the CMOS battery CR2032, also not OK without RAM, or 1 or the 2 RAM modules (RAMS are OK).

3) Laptop does really rare (seems random things) with the 3 leds (power, net, ...)

4) In the past, when trying to restart 100 times via power button, it was sometimes succeeding, now no more.
...
- Channel: BIOS Requests ONLY!
08-09-2024, 10:05 PM
Loading...
No more items.

MSI cr400

Related Topics