need bios dump..
hp envy x360 15m-bp012dx
Collapse
X
Related Topics
Collapse
-
by AhariHi all,
This is my first post here (I am very new to forums!) and I hope someone can help. I am looking for a full dump of the BIOS of a HP Proliant Microserver Gen 8 so that I can get this mini server running again. (BIOS version J06 2019-04-04, chip 25Q064A). I think my board was partially bricked after a failed BIOS update.
I got it second hand in this state and all the normal attempts at bios restoration have not worked. I have even desoldered the chip and tried to load the actual BIOS from HP, but it is missing some parts needed to boot the system.
I...-
Channel: BIOS & Schematic Requests!
-
-
by Loki_FidoHi ya folks,
Hope everyone's having a good day.
I have a HP ENVY x360 2 in 1 Laptop 13-bf0002TU with nothing on the screen.
The laptop starts but no display. Connecting to an external monitor give me nothing too. Ive attached my original backup bios
Make HP ENVY x360 2 in 1
Model 13-bf0002TU
S/N CND3171C5T
Prod ID 6L2F0PA#ABJ
I looked up at this site before writing this request. And there was a link. But i couldn't download any files from it.
Any moderator could look it up, if possible? It says, "Invalid file specified"...-
Channel: BIOS Requests ONLY!
-
-
by mkdjDear all,
I have a ASUS ZenBook UX480F with the following symptoms:
I suspect it is a BIOS issue. So I decided to try to clean the ME region. I followed the guide on win-raid, and I believe I have done everything correctly. My problem is: when I open the outimage.bin in ME Analyzer, it says that it is Extracted, and not Region, Extracted as it should be. Is it normal, or did I do something not correctly? This is my first experience editing BIOS files.
I would appreciate if someone could take time to explain the issue, so that I can learn. But I would...-
Channel: BIOS Requests ONLY!
-
-
by Habble7The Samsung S49CG934SU monitor does not power on - no LED indicator activity and no response to power button. However, when 21V power is connected, it immediately draws 0.8A of current with no display output. The motherboard processor gets warm, and there is continuous reading activity from the W25Q128BV BIOS chip.
Suspected Cause:
I suspect the BIOS may have been corrupted during a power interruption while updating the firmware. The official website provides firmware updates, but they can only be installed via USB flash drive.
Troubleshooting Attempts:
...-
Channel: Troubleshooting Computer Displays
-
-
by parhatskiysn: 8CG8210GTY
a clean bios is needed, as with the old bios there is no activation, black screen. The capslock also flashes - 3 long and 5 short signals​...-
Channel: BIOS Requests ONLY!
-
- Loading...
- No more items.
Comment