Lenovo x270 bios+ec

[hoaca388]

i need fixed bios NM-B061 1.0 no data
x270
sn PC0S1A9C

X270 Laptop (ThinkPad) - Type 20K5

[shiyab]

i need fixed bios NM-B061 1.0 no data
x270
sn PC0S1A9C

hi try

[HT Computer]

hi, i told you to backup my bios and then turn it off, sometimes it works but then it turns off again, can you help me fix it?
dx270 nm-b061 rev 1.0
sn20l82642

[shiyab]

hi, i told you to backup my bios and then turn it off, sometimes it works but then it turns off again, can you help me fix it?
dx270 nm-b061 rev 1.0
sn20l82642

post 122

[mberbouch]

lenovo x270 bios and ec

I need bios and ec dump, how to use the file you attached? its not a bin file.

[mberbouch]

Hello I need clean bios X270 NM-B061 1.0 all voltages are present.
Lenovo X270
Type 20K5-S40W00
S/N:PC-0S1AQW 17/12

[hoaca388]

Hello I need clean bios X270 NM-B061 1.0 all voltages are present.
Lenovo X270
Type 20K5-S40W00
S/N:PC-0S1AQW 17/12

X270 Laptop (ThinkPad) - Type 20K5

[mberbouch]

X270 Laptop (ThinkPad) - Type 20K5

Not working, any way thank you very much.

[jovani1989]

Lenovo Thinkpad X270
Serial number: PC-0TL1V6 18/03
Type: 20HN-0015MX
Motherboard: DX270 NM-B061 Rev:1.0
Not turning on!

[hoaca388]

Lenovo Thinkpad X270
Serial number: PC-0TL1V6 18/03
Type: 20HN-0015MX
Motherboard: DX270 NM-B061 Rev:1.0
Not turning on!

X270 Laptop (ThinkPad) - Type 20HN

[Sidqi Januar Riadi]

please helpme anyone , i have problem laptop can't instal , security mode can't disable, please clear this bios
s/n :PC0J6NM
THANKS RESPON

[smohara]

Hello!
I considered my bios to be out of order and flashed it, considering it to be out of order and not saving the dump. But more than one dump is not suitable for me, please help!!!
Lenovo X270
type : 20k5-s1a51r
dx270 NM B061 rev1.0 016-10-27
s/n: pc0mp19n
bios flash drive: w25q128fvsq

Can you tell me what can be done in my case?
Maybe you can somehow make a dump from another one?

In advance: THANK YOU very much!!!

[SMDFlea]

https://www.badcaps.net/forum/troubl...68#post3607668

[smohara]

Hello!
I considered my bios to be out of order and flashed it, considering it to be out of order and not saving the dump. But more than one dump is not suitable for me, please help!!!
Lenovo X270
type : 20k5-s1a51r
dx270 NM B061 rev1.0 016-10-27
s/n: pc0mp19n
bios flash drive: w25q128fvsq

Can you tell me what can be done in my case?
Maybe you can somehow make a dump from another one?

In advance: THANK YOU very much!!!

I'm sorry if I'm not responding to a comment correctly - I'm just not a frequent user of forums.

Thank you for the comment, but it didn't help me https://www.badcaps.net/forum/troubl...68#post3607668
the cooler is spinning, the power button is on, but the screen is still black

[jaglion19]

I'm sorry if I'm not responding to a comment correctly - I'm just not a frequent user of forums.

Thank you for the comment, but it didn't help me https://www.badcaps.net/forum/troubl...68#post3607668
the cooler is spinning, the power button is on, but the screen is still black

Can you try this and let me know the results? It may have to restart your computer 5 times and I cleaned it up myself.

[smohara]

Can you try this and let me know the results? It may have to restart your computer 5 times and I cleaned it up myself.

tell me, am I flashing it correctly?
did I specify the parameters correctly?

[SMDFlea]

It`s not an OTP chip so don`t select it.

[smohara]

Can you try this and let me know the results? It may have to restart your computer 5 times and I cleaned it up myself.

it didn't work
for me, when I turn it on, an audible warning starts saying that he doesn't see the RAM bar
, but after a while the cooler starts spinning but the screen still doesn't light
up what should I do?

[jaglion19]

it didn't work
for me, when I turn it on, an audible warning starts saying that he doesn't see the RAM bar
, but after a while the cooler starts spinning but the screen still doesn't light
up what should I do?

Try this, if it doesn't work, the problem isn't with the BIOS. It can't be the same problem in all BIOSes. It might be because the programmer you're using is old. I don't know how to use this.