HP DMI Tool NBDmiFit

[Aditya11ttt]

Re: HP DMI Tool NBDmiFit

new link https://drive.google.com/file/d/19i5...ew?usp=sharing update

https://drive.google.com/drive/u/0/f...KyclbyYaMa0d7F

try 2.14

[Shay_G]

Re: HP DMI Tool NBDmiFit

upload ur old dump plz

MOD EDIT: NO dumps in this thread, Upload to the bios requests section: https://www.badcaps.net/forum/forumdisplay.php?f=40

How to dump my biosto file and where to upload¿¿

[SMDFlea]

Re: HP DMI Tool NBDmiFit

How to dump my biosto file and where to upload¿¿

Here is where bios requests go: https://www.badcaps.net/forum/forumdisplay.php?f=40 .You need to backup your bios using an SPI bios programmer.

[feherhollo]

Re: HP DMI Tool NBDmiFit

I have replaced my motherboard and reprogrammed the UUID, serial (except the feature byte and build Id).
The problem is that during boot it says :
"Warning Machine is not in committed state"
When I open the DMI firmware tool it says MPM is not in unlocked mode and the "Commit only" button on the bottom is greyed out.
Where can I find the feature byte and build Id how can I unlock MPM? I read SMC.bin has to be generated based on the UUID and the SN

This is my problem also with factory new 1040 G1 motherboard.

I need to reunlock MPM to correct the fields.

[SMDFlea]

Re: HP DMI Tool NBDmiFit

I have replaced my motherboard and reprogrammed the UUID, serial (except the feature byte and build Id).
The problem is that during boot it says :
"Warning Machine is not in committed state"
When I open the DMI firmware tool it says MPM is not in unlocked mode and the "Commit only" button on the bottom is greyed out.
Where can I find the feature byte and build Id how can I unlock MPM? I read SMC.bin has to be generated based on the UUID and the SN

This is my problem also with factory new 1040 G1 motherboard.

I need to reunlock MPM to correct the fields.

See post #137 .Whats your serial number ?

[feherhollo]

Re: HP DMI Tool NBDmiFit

see post #137 .whats your serial number ?

2ce4210ns1

That post is to lock the MPM
I need to unlock. Tried every method. No success. The MPM locked

[imranromi]

Re: HP DMI Tool NBDmiFit

I have replaced my motherboard and reprogrammed the UUID, serial (except the feature byte and build Id).
The problem is that during boot it says :
"Warning Machine is not in committed state"
When I open the DMI firmware tool it says MPM is not in unlocked mode and the "Commit only" button on the bottom is greyed out.
Where can I find the feature byte and build Id how can I unlock MPM? I read SMC.bin has to be generated based on the UUID and the SN

This is my problem also with factory new 1040 G1 motherboard.

I need to reunlock MPM to correct the fields.

Send error bios file i will fix or remove error.

[feherhollo]

Re: HP DMI Tool NBDmiFit

Send error bios file i will fix or remove error.

The problem is I added the SKU in the wrong format and locked the MPM
This caused not in commited mode error.
I don't want to deal with DUMPS, I prefer the original method.
If no any other way I will dump the chips.
This was factory new replacement motherboard from HP

Thanks

[imranromi]

Re: HP DMI Tool NBDmiFit

The problem is I added the SKU in the wrong format and locked the MPM
This caused not in commited mode error.
I don't want to deal with DUMPS, I prefer the original method.
If no any other way I will dump the chips.
This was factory new replacement motherboard from HP

Thanks

If you done without bios dump tell me i wait..

[feherhollo]

Re: HP DMI Tool NBDmiFit

If you done without bios dump tell me i wait..

I can done without dump if I have the correct SMC.bin file. That will unlock the MPM again and I can modify the faulty settings with HP DMI Tool. Lock the MPM again and every boot error will disappear
Just need the generated SMC.bin file for my serial and UUID

[feherhollo]

Re: HP DMI Tool NBDmiFit

*******

This is current bios. Latest version. Machine not in committed state!!

Featurebyte and Build ID missing. MPM locked
I don't know exactly whats the problem. SKU format is invalid or what??

*********************************************************************
MOD EDIT: Bios requests go in the "Bios Requests ONLY!" section, not in this thread

https://www.badcaps.net/forum/forumdisplay.php?f=40

**********************************************************************

[imranromi]

Re: HP DMI Tool NBDmiFit

[ATTACH]219282[/ATTACH]

This is current bios. Latest version. Machine not in committed state!!

Featurebyte and Build ID missing. MPM locked
I don't know exactly whats the problem. SKU format is invalid or what??

Read bios chip via programmer.You save file without programmer..

[feherhollo]

Re: HP DMI Tool NBDmiFit

Read bios chip via programmer.You save file without programmer..

Yes I know but if I read the chip and open wit hex editor, its only zeros, can't see any content. I have multiply programmers and softwares.

Always have difficulties with this 1040 G1 and G2

In my case the problem is Machine not in committed state because I have not set the vPRO functionality and locked the MPM
If I unlock the MPM again I can commit the board and voila. Problem solved.
What can you do with the dump?

https://youtu.be/Q1tMphdzTIo

[imranromi]

Re: HP DMI Tool NBDmiFit

Yes I know but if I read the chip and open wit hex editor, its only zeros, can't see any content. I have multiply programmers and softwares.

Always have difficulties with this 1040 G1 and G2

In my case the problem is Machine not in committed state because I have not set the vPRO functionality and locked the MPM
If I unlock the MPM again I can commit the board and voila. Problem solved.
What can you do with the dump?

https://youtu.be/Q1tMphdzTIo

i can solve all problem via bios dump.read complete bios and send if you want solve problem.No have other way if you want waste time you can try via software.

[feherhollo]

Re: HP DMI Tool NBDmiFit

i can solve all problem via bios dump.read complete bios and send if you want solve problem.No have other way if you want waste time you can try via software.

Okay I can read the chips but how? Both of my programmer read out looks like nothing...
Okay I will send you the dump and you will check it.

[SMDFlea]

Re: HP DMI Tool NBDmiFit

Bios requests go in the "Bios Requests ONLY!" section, not in this thread

https://www.badcaps.net/forum/forumdisplay.php?f=40

[feherhollo]

Re: HP DMI Tool NBDmiFit

Bios requests go in the "Bios Requests ONLY!" section, not in this thread

https://www.badcaps.net/forum/forumdisplay.php?f=40

I don't request bios.
I just like to get my problem solved. Locked MPM to Unlocked MPM

[feherhollo]

Re: HP DMI Tool NBDmiFit

i can solve all problem via bios dump.read complete bios and send if you want solve problem.No have other way if you want waste time you can try via software.

Here is the dumps https://www.badcaps.net/forum/showthread.php?t=88318

[Shay_G]

Re: HP DMI Tool NBDmiFit

How to dump my biosto file and where to upload¿¿

i dumper and uploaded my bios

https://www.badcaps.net/forum/showth...517#post986517

please unlock my MPM,

many thanks

[feherhollo]

Re: HP DMI Tool NBDmiFit

i dumper and uploaded my bios

https://www.badcaps.net/forum/showth...517#post986517

please unlock my MPM,

many thanks

Sorry MPM unlocking only possible with SMC.bin file which is unique for each unit generated from serial and UUID. Only HP can do.