Packard Bell Easynote TE69BM problem with software ~BIOS

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • midi2008
    Member
    • Nov 2017
    • 26
    • algeria

    #1

    Packard Bell Easynote TE69BM problem with software ~BIOS

    Hi, I have problem with installation Windows 7.

    I haven't option for change from UEFI to Legacy mode,
  • diif
    Badcaps Legend
    • Feb 2014
    • 6978
    • England

    #2
    Re: Packard Bell Easynote TE69BM problem with software ~BIOS

    Update your BIOS. Legacy mode was introduced in version 2.11.

    Comment

    Related Topics

    Collapse

    • cr4zychriss
      [Problem/ Request] Bricked TongFang GK7MRFR BIOS
      by cr4zychriss
      Hello everyone,
      I am requesting urgent assistance to unbrick my laptop, a rebranded TongFang GK7MRFR chassis. The laptop is completely dead following a faulty in-OS EC flash attempt.
      I have successfully used a CH341A programmer and can read/write/verify both flash chips, but using my backups/extractions has failed to restore power. The root cause is likely a corrupted Intel Management Engine (ME) region or an incompatible EC/BIOS pairing. System & Hardware Details
      • Barebone / Chassis: TongFang GK7MRFR
      • MB: MB: GK5MP5X V1.0 Prod :GK5MRFV10T04201310281
      • Rebrand: PC Specialist
      ...
      11-14-2025, 04:04 PM
    • lucaszmn
      Summary of BIOS Whitelist Removal Problem Lenovo Thinkpad T560
      by lucaszmn


      Summary of BIOS Whitelist Removal Problem


      Problem:
      I am attempting to remove the WWAN card whitelist from my Lenovo ThinkPad T560.
      Initial Findings:
      • My current BIOS version is N1KET58W (1.45).
      • I have a CH341A programmer and have successfully created two full backups of my BIOS.
      • I have the ability to use command-line tools on a Linux machine.
      Troubleshooting Steps & Conclusions:
      • I attempted to use several automated and manual patching methods on my N1KET58W (1.45) BIOS, including using hex strings. These attempts all failed.
      • I concluded that the
      ...
      08-12-2025, 03:01 PM
    • maxlove70
      Need Bios Packard Bell iSTART 2356
      by maxlove70
      Hello, I'm searching Bios for Packard Bell iSTART 2356.

      Asus for Packard Bell M2NS-NVM (Boston) 0206 BIOS - 6A69NA01
      Manufacturer and model: Asus for Packard Bell M2NS-NVM (Boston)

      Chipset: AMD 1100

      Part number: 6A69NA01

      BIOS ID: 03/05/2007-NF-MCP61-M2NS-NVM-00

      BIOS Release date: 2007-03-05

      BIOS Revision: 0206


      Packard Bell Support for this PC is discontinued.
      Please Help Me !!!!

      Thanks.
      02-16-2023, 11:52 AM
    • AquaMan Ua
      Problem with PANASONIC CF53 laptop after changing BIOS settings
      by AquaMan Ua
      Hello. I am asking you for a hint on how to solve the problem with my touchbook Panasonic CF53-2 standart model. After setting up the BIOS, the laptop displays the wrong image until Windows loads. (More precisely, it displays, but distorted, instead of the Panasonic image immediately after turning it on, it displays what is in photo #1 in the attached file) Then the image appears when Windows starts loading and then there are no problems with the screen until the reboot. If you enter the BIOS, just a black screen. If you connect an external screen, the image on it is the same as on the built-in...
      05-17-2025, 09:40 AM
    • traxformania
      TONGFANG "GM7TG7P" Bios Password Problem?
      by traxformania
      Hello,

      I'm using TONGFANG "GM7TG7P" model laptop for over 3 years and i'm entering the same bios administrator password everyday. My laptop has Aptio BIOS (American Megatrends, AMI).

      But today it's not accepting my password. I'm %100 sure i'm entering the correct password.

      I'm trying to reset my bios without success.

      I tried :

      -I removed the BIOS battery and main battery. Waited for a long time but it didn't work. They already stated in the user manual that the password will not be reset even if the batteries...
      11-15-2023, 07:32 AM
    • Loading...
    • No more items.
    Working...