HP 250 G6 bios password

[lefos]

Hello everybody,

I am trying to find a password free bios in order to flash this one, having bios password during boot, and can't find it anywhere.
Can somebody help me please ?

Mainboard type CSL50/CSL52 LA-E811P Rev 2.0

I have attached the original -locked- bin.



Thanks in advance!

[imranromi]

Re: HP 250 G6 bios password

Hello everybody,

I am trying to find a password free bios in order to flash this one, having bios password during boot, and can't find it anywhere.
Can somebody help me please ?

Mainboard type CSL50/CSL52 LA-E811P Rev 2.0

I have attached the original -locked- bin.



Thanks in advance!

Try this and reply you sure 1 bios chip this board?

[lefos]

Re: HP 250 G6 bios password

Hello,

Thanks a lot for your effort. I have tried it and I have the same result. Enter power on or administrator password.
Trying without hdd connected.
There is one chip on the mainboard (if I am seeing it right)

[imranromi]

Re: HP 250 G6 bios password

Hello,

Thanks a lot for your effort. I have tried it and I have the same result. Enter power on or administrator password.
Trying without hdd connected.
There is one chip on the mainboard (if I am seeing it right)

Try this if same not inside bios password maybe inside password kbc chip.

[vhn1998]

Re: HP 250 G6 bios password

test try

[mcplslg123]

Re: HP 250 G6 bios password

Password is stored in kbc and not main in newer boards. So you need to flash kbc.

[vhn1998]

Re: HP 250 G6 bios password

you can reference at :
https://forums.mydigitallife.net/thr...5#post-1405336

[lefos]

Re: HP 250 G6 bios password

Hello thanks everybody for their help.

imranromi your file works the only thing is that when the device powers on is saying for a while Manufacturing programming mode in unlock.
I can get in BIOS and boot from hdd.
vhn1998 I haven't checked your file but I have been reading the info on the link that you send me regarding this manufacturing mode. As I can understand I have to write the s/n ID etc etc in order to get out of this manufacturing mode?

[mcplslg123]

Re: HP 250 G6 bios password

Hello thanks everybody for their help.

imranromi your file works the only thing is that when the device powers on is saying for a while Manufacturing programming mode in unlock.
I can get in BIOS and boot from hdd.
vhn1998 I haven't checked your file but I have been reading the info on the link that you send me regarding this manufacturing mode. As I can understand I have to write the s/n ID etc etc in order to get out of this manufacturing mode?

No. Manufacturing mode wont go away by filling dmi info. Use hp BCU utility to solve manufacturing mode issue. There are many videos on youtube which will make it clear to you about the utility.

[lefos]

Re: HP 250 G6 bios password

Thanks a lot again.
I am a bit lazy and the owner was in a haste so I gave it to him as it is in MPM mode.
So if anybody needs dump for this board I can confirm it works 100%

[ravenmx]

Re: HP 250 G6 bios password

Try this if same not inside bios password maybe inside password kbc chip.

Thanks it works

[canali]

Re: HP 250 G6 bios password

Thanks it works

[mahmoud13579]

Re: HP 250 G6 bios password

I have the same notebook. I have the problem of bios administrator password.
And my error code
[ i 71382276 ]
Can anyone help me please ?

[onizzbox]

Re: HP 250 G6 bios password

I have the same notebook. I have the problem of bios administrator password.
And my error code
[ i 71382276 ]
Can anyone help me please ?

After entering the wrong password a third time, you will receive
the hash, prefix followed by an eight digit number.
e.g. [i 12345678]

--------------------------------
Hash......: 71382276
Password: 46913639
--------------------------------

Restart laptop and enter the password to regain system access.

[mahmoud13579]

Re: HP 250 G6 bios password

Thank you very much

[SD tech]

Re: HP 250 G6 bios password

thanx man it works

[datodati962@gmail.com]

Re: HP 250 G6 bios password

test try

hi everybody,need working bin for la-e811p rev 2.0 Bios + EC both bin
Thank you

[peste]

Re: HP 250 G6 bios password

hi everybody,need working bin for la-e811p rev 2.0 Bios + EC both bin
Thank you

post backups of bios .. (main + ec) ..

[magictouch]

Re: HP 250 G6 bios password

Hi,
i have hp 250 g6 locked with bios password system code is 23701533, can any body help?
Regards

[shabi]

Re: HP 250 G6 bios password

hi,
i have hp 250 g6 locked with bios password system code is 23701533, can any body help?
Regards

start with i