Re: Remove_SMM... UEFI.
Actually I downloaded a patched bios here. It still asks me to insert a key.
-
Re: Remove_SMM... UEFI.
@dgs3342
Have you tried already to press just ENTER key when asked for KEY? AFAIK the files on this forum are patched to accept any KEY, unless you got the file from other source.Leave a comment:
-
Re: Remove_SMM... UEFI.
Hello, I have a E490 with bios locked. Hardware ID is 7156048. Can anyone help me to calculate? Thanks!Leave a comment:
-
Re: Remove_SMM... UEFI.
PLease patch This bios for meLast edited by SMDFlea; 04-01-2023, 08:02 AM.Leave a comment:
-
Last edited by SMDFlea; 04-01-2023, 08:02 AM.Leave a comment:
-
Re: Remove_SMM... UEFI.
Méthode for unlock ThinkPad x13 gen 1 and shematic for svod plzLeave a comment:
-
Re: Remove_SMM... UEFI.
Password in MEC chip . https://www.badcaps.net/forum/showth...light=x13+gen1Leave a comment:
-
Re: Remove_SMM... UEFI.
hi , can somebody help with x13 gen1
remove passwordLeave a comment:
-
-
Re: Remove_SMM... UEFI.
Yes, flash the ORIGINAL BIOS. Then power-on the laptop, press F1 to go into Setup/BIOS and press F9 (Load Default Values), save changes.Leave a comment:
-
Re: Remove_SMM... UEFI.
okay yeah that worked . so now i flash back the original bios?Leave a comment:
-
Re: Remove_SMM... UEFI.
(Hardware ID: 3641016)
The KEY is (new-A): 6409904Leave a comment:
-
Hi, i have an ASUS PRIME Z590M-PLUS board, which had an shorted Z590 chipset. I have succesfully exchanged the chipset to a factory new one, however there is a serious problem with the Intel Management Engine (later on: ME) not beeing activated after the chipset device replacement.
For lower chipset families (on ASUS boards) it worked to program the oldest bios version into the SPI rom, and the bios had activated the Management Engine itself by default - there was a message on the screen prior booting - "BIOS is updating Management Engine ..... . Do not shut down to prevent... -
Its a bit of a long tale but i swapped the original hd for a 2tb ssd,i want about 6 bootable partitions,it needs the uefi enabling in the bios,I am ok with that,the issue is i cant convert the drive to gpt when it has data on it,the issue is windows wont install to a gpt drive,there is a utility from hp to install the efi partition on the drive but it runs on windows,its a chicken and egg thing,can anyone explaine how hp did this?,I am pulling my hair out;it seems i need to run the hp uefi tool to make the uefi option work in the bios, but it needs windows to run this that wont install on a gpt...07-15-2024, 10:15 AM -
Hey guys,
Bought myself Surface Pro 4 tablet today on a local craigslist-type website.
I've seen that UEFI was password protected and of course the seller forgot the password, but decided to buy it anyway.
Really needed such a tablet to use with RomRaider to do some logging/tuning on my car.
It has secure boot turned off and boots from USB, so I've formatted SSD and have done clean win10 install.
Works fine, but wanted to ask, are there any real security risks associated with UEFI settings on Surface (remote access etc.)?
From what I've... -
Hi guys.
I am very new to this business and i have some questions. Maybe someone can help me further.
I have a 2015 Intel NUC NUC6i3SYH and for some internet and office the computer works perfectly. Lately it has been bugging me a bit on and off. Then I saw there is a UEFI update from Intel and I thought if I put it on, the problems might be gone, but unfortunately the update didn't go through. The screen stayed black and after waiting for a while nothing happened, I had to pull the plug at some point. Of course, the NUC then failed to boot!
... -
Hello, I wanted to know if it is possible to modify a BIOS file to accept a legacy disk when it does not have the capability, I had this problem on a Optiplex 3060 that were donated to my job where we use non-uefi linux distros, we cannot use uefi since is a "big machine" with this systems beign the center of all of it, we can't change the distro now, maybe make some changes, but if I can modify the BIOS it would be awesome.
Leave a comment: