-
-
Re: Remove_SMM... UEFI.
thank you very much, I decidedComment
-
-
Re: Remove_SMM... UEFI.
Can some one patch this one tksLast edited by SMDFlea; 04-01-2023, 07:27 AM.Comment
-
Last edited by SMDFlea; 04-01-2023, 07:27 AM.Joe's KMX1 Pro S, RevelprogIS, TL866II, CH341A, Vertyanov JIG 3.1, Eakins Microscope, Gordak 952, 30V/5Ah PSU, 890C+, T2L Thermal Camera, SVOD 3, etc.Comment
-
Re: Remove_SMM... UEFI.
t450 need claer password fileLast edited by SMDFlea; 04-01-2023, 07:27 AM.Comment
-
-
Last edited by Karol; 05-18-2020, 12:05 PM.Joe's KMX1 Pro S, RevelprogIS, TL866II, CH341A, Vertyanov JIG 3.1, Eakins Microscope, Gordak 952, 30V/5Ah PSU, 890C+, T2L Thermal Camera, SVOD 3, etc.Comment
-
Re: Remove_SMM... UEFI.
Hi everyone
There would be a couple of Lenovo T440ps here
(System Security -bottom cover tamper detection) error.
I've been looking at the connection, someone could help
ThanksComment
-
Re: Remove_SMM... UEFI.
please patch this file contains password
it s t460s
thanksLast edited by SMDFlea; 04-01-2023, 07:27 AM.Comment
-
-
Re: Remove_SMM... UEFI.
Friends, please help. My English is very bad. I have a carbon x1 3gen and I don't know the password. Here is my dump.
https://drive.google.com/open?id=1jI...4h_Xaz8ZRy9DQH
thanks for the helpComment
-
Last edited by SMDFlea; 04-01-2023, 07:27 AM.Joe's KMX1 Pro S, RevelprogIS, TL866II, CH341A, Vertyanov JIG 3.1, Eakins Microscope, Gordak 952, 30V/5Ah PSU, 890C+, T2L Thermal Camera, SVOD 3, etc.Comment
-
Last edited by SMDFlea; 04-01-2023, 07:27 AM.Joe's KMX1 Pro S, RevelprogIS, TL866II, CH341A, Vertyanov JIG 3.1, Eakins Microscope, Gordak 952, 30V/5Ah PSU, 890C+, T2L Thermal Camera, SVOD 3, etc.Comment
-
Hi, i have an ASUS PRIME Z590M-PLUS board, which had an shorted Z590 chipset. I have succesfully exchanged the chipset to a factory new one, however there is a serious problem with the Intel Management Engine (later on: ME) not beeing activated after the chipset device replacement.
For lower chipset families (on ASUS boards) it worked to program the oldest bios version into the SPI rom, and the bios had activated the Management Engine itself by default - there was a message on the screen prior booting - "BIOS is updating Management Engine ..... . Do not shut down to prevent... -
Its a bit of a long tale but i swapped the original hd for a 2tb ssd,i want about 6 bootable partitions,it needs the uefi enabling in the bios,I am ok with that,the issue is i cant convert the drive to gpt when it has data on it,the issue is windows wont install to a gpt drive,there is a utility from hp to install the efi partition on the drive but it runs on windows,its a chicken and egg thing,can anyone explaine how hp did this?,I am pulling my hair out;it seems i need to run the hp uefi tool to make the uefi option work in the bios, but it needs windows to run this that wont install on a gpt...07-15-2024, 10:15 AM -
Hey guys,
Bought myself Surface Pro 4 tablet today on a local craigslist-type website.
I've seen that UEFI was password protected and of course the seller forgot the password, but decided to buy it anyway.
Really needed such a tablet to use with RomRaider to do some logging/tuning on my car.
It has secure boot turned off and boots from USB, so I've formatted SSD and have done clean win10 install.
Works fine, but wanted to ask, are there any real security risks associated with UEFI settings on Surface (remote access etc.)?
From what I've... -
Hi guys.
I am very new to this business and i have some questions. Maybe someone can help me further.
I have a 2015 Intel NUC NUC6i3SYH and for some internet and office the computer works perfectly. Lately it has been bugging me a bit on and off. Then I saw there is a UEFI update from Intel and I thought if I put it on, the problems might be gone, but unfortunately the update didn't go through. The screen stayed black and after waiting for a while nothing happened, I had to pull the plug at some point. Of course, the NUC then failed to boot!
... -
Hi, I would appreciate your help with the following problem.
I have a Fujitsu laptop AH562 witn a BIOS-UEFI problem since I converted the HDD to a SSD. For more details on the paltop go to the following link:
http://support.fujitsupc.com/CS/Port...srch=TECHSPECS
After copying the HDD to SSD with ALtiris utility provided with the Kingston SSD and replacing the HDD with the SSD the laptop went into a startup loop with no screen display and only the disk LED flashing twice per second. I waited for approximatly 2h and then stopped the laptop...
Comment