mb is uma only. Can anybody share it??
-
-
Re: Hp 250 g4 la-c811p kb9022 dump required
Hello friend ,
here you go
all original dums in one file
good luck -
Re: Hp 250 g4 la-c811p kb9022 dump required
merci foufou0238Comment
-
Re: Hp 250 g4 la-c811p kb9022 dump required
niko na moja nimekua nikitumia sana / good original dumpfileLast edited by mainah njoroge; 01-07-2018, 06:25 AM.Comment
-
Re: Hp 250 g4 la-c811p kb9022 dump required
Thank you so muchComment
-
Re: Hp 250 g4 la-c811p kb9022 dump required
Thank youComment
-
Re: Hp 250 g4 la-c811p kb9022 dump required
hello friends la-c881p rev 1.0 had a problem with this model not turning on. There was b+ but there were no 3v and 5v outputs. The problem was caused by the crack at the end of the charging socket. I'm sharing for information purposes also kbc is difficult for this model, I'm adding it hereAttached FilesLast edited by altuntabak; 07-07-2023, 07:23 AM.Comment
-
-
----------------------------------------------------------------------------------------------------------------------------------------------------------
All donations to Badcaps are welcome.
Become a Badcaps supporter
>>>>> click on this link to donate <<<<<
Thanks to all supporters.
----------------------------------------------------------------------------------------------------------------------------------------------------------Doctrina est fructus dulcis, radicis amarae..Comment
-
Hello!
i got a damaged Manson NTP-5561 (60V, 1,6A DC output) and and the main issue is that the controler IC for the LCD display has a short. The controler IC PIC18F87K90 is mounted on the back of the back of the LCD. Vss-Vdd = 3 Ohm. The 5V and 3,3V power line was killed as well, but that is not a problem. A new LDO 3,3V and 5V 7805 is already ordered.
Replacing the PIC18F87K90 is necessary but that makes no sense without having the HEX dump of the new controler.
Does anybody have such a power supply and could do a HEX dump of the Flash and EEPROM memory?
...04-12-2025, 10:38 AM -
HikVision DS-7104HQHI-K1 Motherboard: DS-80303_P REV 2.0 and SN: C47579229 Firmware dump or unlock required. Thank you!...06-11-2025, 01:54 PM -
Hey everyone,
I would like to request a bios dump for ZED AIR ULTRA B GOLD with part no. IL.1106.232GB.BMWCAEG
I have attached the bios dump originally came with the laptop. Laptop has no display when powered on.
Appreciate if anyone can help me by providing a working bin file.
Thanks!... -
Need emmc dump for XBR-65X850D or for 55” version, board number is 1-980-832-11, this is USA board and Europe and UK board has same board number but board is slightly different and the dump didn’t work so really need the correct one, I don’t mind looking after the person with the dump...01-17-2024, 11:40 AM -
Hi all,
First time trying to fix a TV for a friend, it's a Bush DLED32165HD.
Power Board - 17IPS11
Mainboard - 17MBS82S
Panel - VES315WNDB-02
Red blinking standby light is on steady, press power button on remote and light flashes 7 times then stays steady, press power on remote again light flashes 10 times and then goes off.
Checked all the voltages on the power board inc backlight circuit, they all read ok and are stable. Backlights tested with backlight tester and all work fine (2 strips x11LED on each).
No picture, backlight or sound just blinking...
Comment