Emmc dump for XBR-65X850D required

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • imran333
    Member
    • Apr 2012
    • 48
    • uk

    #1

    Emmc dump for XBR-65X850D required

    Need emmc dump for XBR-65X850D or for 55” version, board number is 1-980-832-11, this is USA board and Europe and UK board has same board number but board is slightly different and the dump didn’t work so really need the correct one, I don’t mind looking after the person with the dump

Related Topics

Collapse

  • Tynan Dill
    Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
    by Tynan Dill
    I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

    Upon bringing it home and plugging it up, it showed a standby light.

    I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

    The screen seems to blackout and stay black, but with a flashlight I can see the display.

    With my Playstation 4 connected via HDMI, and running a game I can hear sound.

    Assuming...
    11-22-2024, 01:46 PM
  • m1ch43lzm
    HP Pavilion 15-eh Board DAG7HAMB8F0 - CPU throttling to 0.4GHz (PROCHOT_EXT) and black screen
    by m1ch43lzm
    Hi, this is my personal laptop, which the original board (lets call it Board A) blew up PU8700 (TPS51486), making a hole on the board, i had left the laptop at my desk one day with the battery fully charged and didn't touch it for a week, but when i tried to turn it on it didn't
    Thought the battery was dead, so i plugged in the charger then tried to power on, the power LED blinked once, charged LED still orange, unplugged the charger, plugged in again and I noticed the "magic smoke" smell, so i unplugged the charger, removed the back cover and saw the blown IC (the "magic...
    05-12-2025, 08:37 PM
  • DynaxSC
    MSI PRO B660M-G DDR4 - real bios dump from board needed (no stock bios)
    by DynaxSC
    Hi, I have an MSI PRO B660M-G DDR4 board with damaged BIOS and i need a bios dump from a real board, along with MAC, UUID and Serial Number info (eg. a BIOS screenshot and pictures from the board stickers).

    I need to reconstruct the bios on my board, based on another bios image form a real board - meaning a bios image containing MAC address, UUID and Serial number. A stock BIOS is not suffiecient, as it is impossible to discover where the MAC, UUID and SerialNumber are stored. Tried with a similar board, but there are too much differences, and the stock BIOS is missing a lot of...
    11-17-2023, 10:56 AM
  • howardc64
    TCL 55S425 few horizontal lines, potential failure on both side of panel/buffer board
    by howardc64
    All left and right refers to looking from rear of TV (or looking from front with TV upside down)
    • TV came with vertical bars and no image. Found faulty TVS on left buffer board. Also replaced T-Con (may have damaged the original while hot air removing components, board has slight warp) and have full image but few horizontal lines on the screen. Some of the lines appears to be 2 pixel tall while others are 1 pixel tall.
    • Disconnecting left and right buffer board potentially reveals problems on both sides with different signals (unless this T-Con require jumper like Samsung FB_TRDY1&3) Fault
    ...
    07-24-2025, 05:17 PM
  • saghi88
    i need eMMC Dump for Sony KDL-55W805C
    by saghi88
    Hello everyone,

    The TV won't turn on (no power, no LED,). All voltages are present on the motherboard. The CPU is working and is getting warm.

    This is a common issue with this model. If the eMMC is faulty, the TV will either go into a reboot loop or not turn on at all.

    does anyone have the EMMC dump file?


    Model: Sony KDL-55W805C
    Mainboard: 1-980-805-31
    EMMC: SK HYNIX H26M52103FMR
    Display-Panel: T550HVF06.0
    07-04-2025, 02:11 PM
  • Loading...
  • No more items.
Working...