Pls. i need bios dump for packard bell EASYNOTE NJ31
ID Motherboaed : DA0Z07MB6E0 rev. E
ID Motherboaed : DA0Z07MB6E0 rev. E
-
-
Re: i need bios dump for packard bell
make backup
if you only have eyes, wou could go to packad bell website and download bios
after extract you would find this fileIm Back... sort of...
-
Re: i need bios dump for packard bell
Da0z07mb6e0 rev:eComment
-
Due to a lack of donations, server free space at a critical level, and possible closure of Bios Requests all donations are welcome, click:
>>>>> https://www.badcaps.net/index.php?pageid=donate1 <<<<<
Every donation made will go towards server fees and maintenance costs.Comment
-
Re: i need bios dump for packard bell
Gateway NV40(Z07) (DA0Z07MB6E0 -REV E)Comment
-
Re: i need bios dump for packard bell
TryComment
-
Re: i need bios dump for packard bell
Hello everyone need bios Packard bell MODEL Z06
board number DA0Z06MB8D0 REV D
thnaks old dump attachedComment
-
Re: i need bios dump for packard bell
thanks dear but still same problem 2 seconds on then turn off
3.3v ok 5v also ok before well hangup then i turns off long press after that like that anyway dear thanks maybe PCH problem or maybe bios not match coz thier no name gatway only Packard bell z06Comment
-
Hello, I'm searching Bios for Packard Bell iSTART 2356.
Asus for Packard Bell M2NS-NVM (Boston) 0206 BIOS - 6A69NA01
Manufacturer and model: Asus for Packard Bell M2NS-NVM (Boston)
Chipset: AMD 1100
Part number: 6A69NA01
BIOS ID: 03/05/2007-NF-MCP61-M2NS-NVM-00
BIOS Release date: 2007-03-05
BIOS Revision: 0206
Packard Bell Support for this PC is discontinued.
Please Help Me !!!!
Thanks. -
The Samsung S49CG934SU monitor does not power on - no LED indicator activity and no response to power button. However, when 21V power is connected, it immediately draws 0.8A of current with no display output. The motherboard processor gets warm, and there is continuous reading activity from the W25Q128BV BIOS chip.
Suspected Cause:
I suspect the BIOS may have been corrupted during a power interruption while updating the firmware. The official website provides firmware updates, but they can only be installed via USB flash drive.
Troubleshooting Attempts:
... -
Hi, I have an MSI PRO B660M-G DDR4 board with damaged BIOS and i need a bios dump from a real board, along with MAC, UUID and Serial Number info (eg. a BIOS screenshot and pictures from the board stickers).
I need to reconstruct the bios on my board, based on another bios image form a real board - meaning a bios image containing MAC address, UUID and Serial number. A stock BIOS is not suffiecient, as it is impossible to discover where the MAC, UUID and SerialNumber are stored. Tried with a similar board, but there are too much differences, and the stock BIOS is missing a lot of...11-17-2023, 10:56 AM -
hi all,
ive got a packerd bell lv11hc with a bad bios,
the laptop works but reboots randomly and after reboot it freezes on windows loading,
i found a acer v3-771g bios here on the forum when i was searching for the packard bell version, the acer bios works fine, no random reboots, no freezes, but the keyboard layout of acer and packerd bell are different.
thats the reason why i want the PB backup to be fixed,
hope someone can help me, i added the main and ec? bios files
greetings... -
Hello,
I'm requesting a full BIOS dump (including EC firmware) for an HP OMEN 17-an012nf laptop.
Details:
Model : HP OMEN 17-an012nf
Motherboard Part Number : DAG3BAMBAF0 REV : F
Serial Number (S/N) : 5CD7280D51
BIOS chip : Winbond W25Q64VSIQ
Programmer : EZP2023+
Issue : The motherboard is not powering on. Only the 5V rail is present. The 3.3V rail is missing because EN1 on the SY8286B remains stuck at 0V. This signal is driven directly by the EC/SIO. I replaced the 3.3V regulator and confirmed it's working.
I already...
Comment