Need bios dump for hp 15-n234sl Board ID 02165, from hp site the bios is encrypted, thanks.
DA0U82MB6D0 Bios & EC Files
Collapse
X
-
Re: Need Bios Dump HP 15-n234sl BID 02165
backup old bios and try thisAttached FilesIm Back... sort of...Comment
-
-
HP 15-n015st - DA0U82MB6D0 Bios & EC Files
HP 15-n015st - i5-NVidia
MB : DA0U82MB6D0
I/O : ENE KB9010QF-C4 128Kb
Bios: Winbond 25Q64FV 8MbComment
-
Re: Need Bios Dump HP 15-n234sl BID 02165
Backup old bios and try this.....Attached FilesLast edited by nbanti; 10-21-2017, 02:23 AM.Comment
-
Need Bios For DA0U82MB6D0 Rev D
Need Bios For :
DA0U82MB6D0
Rev D
With NVIDIA GPU
I Attach together with my dump bin file hereAttached FilesComment
-
Re: Need Bios For DA0U82MB6D0 Rev D
Look here but always try search before opening a new thread
https://www.badcaps.net/forum/showth...ht=DA0U82MB6D0Comment
-
Re: Need Bios For DA0U82MB6D0 Rev D
Look here but always try search before opening a new thread
https://www.badcaps.net/forum/showth...ht=DA0U82MB6D0Comment
-
Re: Need Bios For DA0U82MB6D0 Rev D
No display can be coz of "N" number of issues in mb. You need to troubleshoot first-doesnt seems bios issue. First, check whether all the coils have voltages or not.Comment
-
Re: Need Bios For DA0U82MB6D0 Rev D
First simptom when I received this mobo is cannot turn ON ( DC Jack LED is turned on )
After flash bios, mobo can turn ON but no display. Already tried with few version of bios but still no luck...Comment
-
Related Topics
Collapse
-
by Habble7The Samsung S49CG934SU monitor does not power on - no LED indicator activity and no response to power button. However, when 21V power is connected, it immediately draws 0.8A of current with no display output. The motherboard processor gets warm, and there is continuous reading activity from the W25Q128BV BIOS chip.
Suspected Cause:
I suspect the BIOS may have been corrupted during a power interruption while updating the firmware. The official website provides firmware updates, but they can only be installed via USB flash drive.
Troubleshooting Attempts:
...-
Channel: Troubleshooting Computer Displays
-
-
Hello engineers 😀,
I’m kindly requesting a clean and unlocked BIOS dump for the following HP laptop, as it’s bricked after flashing SP152727. The system now keeps rebooting, and the original issue was an Administrator / Power-On Password that I can no longer access.😏
🔧 Device Info:
- Model: HP 15-da2007ne
- Product Number: 8XF55EA#ABV
- Serial Number: CND0338P0D
- CPU: Intel Celeron N4000
- EC/BIOS Chip: [Add chip number from the motherboard or BIOS chip]
💀 Problem:😅
- Device shows “Administrator Password”...2 Photos-
Channel: BIOS Requests ONLY!
Today, 04:54 AM -
-
by CityminHi all,
My Samsung Galaxy Book 2 Pro 15.6-inch laptop has no display and won't boot.
The charging red LED lights up, but the charging screen doesn't show any indication.
When I press the power button, the blue LED cycles on and off three times, then the screen doesn't turn on, and the device won't boot.
(I've tried removing the battery and resetting the device, but the issue persists.)
NoteBook Model name : Samsung NT955XED-KK51G(Galaxy book2 pro, i5-1240p, 15.6inch AMOLED)
PCB model name : Venus2-15-5G(REV1.2), Venus2-15 ADL NPC
S/N : 5RNK9FFT70...-
Channel: BIOS Requests ONLY!
-
-
by DynaxSCHi, I have an MSI PRO B660M-G DDR4 board with damaged BIOS and i need a bios dump from a real board, along with MAC, UUID and Serial Number info (eg. a BIOS screenshot and pictures from the board stickers).
I need to reconstruct the bios on my board, based on another bios image form a real board - meaning a bios image containing MAC address, UUID and Serial number. A stock BIOS is not suffiecient, as it is impossible to discover where the MAC, UUID and SerialNumber are stored. Tried with a similar board, but there are too much differences, and the stock BIOS is missing a lot of...11-17-2023, 10:56 AM -
by MDSIHello,
I'm requesting a full BIOS dump (including EC firmware) for an HP OMEN 17-an012nf laptop.
Details:
Model : HP OMEN 17-an012nf
Motherboard Part Number : DAG3BAMBAF0 REV : F
Serial Number (S/N) : 5CD7280D51
BIOS chip : Winbond W25Q64VSIQ
Programmer : EZP2023+
Issue : The motherboard is not powering on. Only the 5V rail is present. The 3.3V rail is missing because EN1 on the SY8286B remains stuck at 0V. This signal is driven directly by the EC/SIO. I replaced the 3.3V regulator and confirmed it's working.
I already...-
Channel: BIOS Requests ONLY!
-
- Loading...
- No more items.
Comment