Can anybody fix this bios?
Laptop turn on but suddenly it turns off.
Cedar_intel -MB
13269-1
PWB. FX3MC REV:AOO
Services Tag: 26QM832
-
SERVICE TAG -JJXRB82
DELL INSPRION 3542
MOTHERBOARD NO-13269-1 PWB.FX3MC REV.A00
ITS SUPER IO DAMAGE I CANT READ THE EC BIOS
Leave a comment:
-
-
Hello, please repair my bios
No picture
Dell Inspiron 5748
Service Tag: 9V9S512
Express service code: 21481921910
FX3MC REV:A00 board
Cedar Intel 13269-1
After uploading the bios from post 3, the laptop starts up with an image.
The fan spins quickly
I am attaching the original biosLeave a comment:
-
Re: dell inspiron 15 BIOS NEED 13269-1
DEAR master please fix attach file gpu motherboard
this bios didn display
service tag 37VSK52Leave a comment:
-
Re: dell inspiron 15 BIOS NEED 13269-1
[QUOTE=zaido;1263105]hereOriginally posted by zaidoLeave a comment:
-
-
Re: dell inspiron 15 BIOS NEED 13269-1
[QUOTE=zaido;1263104]pls help build my bios no display
Cedar_Intel-MB 13269-1
Pwb. FX3MC REV:A00
dellLeave a comment:
-
Re: dell inspiron 15 BIOS NEED 13269-1
Hi a members
I need aworking bios clean me of DELL inspiron14
Cedar14_intel -MB
13269-sb
448.00g07.00sb
Services Tag: HHYG782
i7-4510ULeave a comment:
-
-
Re: Dell inspiron 15 BIOS NEED 13269-1
Hi a members
I need aworking bios clean me of DELL inspiron15-3000 series
Cedar_intel -MB
13269-1
PWB. FX3MC REV:AOO
Services Tag: JMTG932
I5 5200Leave a comment:
-
-
Hello, I have an old Dell G3 3579 (ST: 2WQ7LP2-8FC8) with a newer 8FC8 BIOS password. I have successfully attached to the flash chip (W25Q128JVSQ) on the motherboard with a CH341A programmer and made several modifications using Intel FIT (e.g., allow software SPI write) without bricking. I was also able to boot to a modified GRUB shell where I attempted to edit many BIOS security related options like BIOS Guard/Lock, Flash Signature Override, ME FW Image Re-Flash, etc.
Unfortunately, some of these modifications like to Intel BIOS Guard failed because it is fused into the PCH. Also,... -
looking for a fully extracted (by programmer) Bios for a Dell Inspiron 17 (7786) v.1.09 or newer, so I can compare it with my own bios to check for corruption.
cheers
Dell Inspiron 17 (7786) Laptop
Service Tag: 5J0NHT2
Bios: 1.9.0
MOBO: RO 15 17 WHL 2GB MB / 18706-2
Attached;
1. My saved bios using a programmer
2. Dells Bios updater .exe (v1.16)
3. Dells Bios recovery file
4. What I got when i tried to extract the main bios .bin file from Dells Bios v1.16 exe/rcv using some .py script i found online.
5. Image of ME... -
Hi, I hope some one has some advice for me. I searched the forums but didn't see anything relevant. I acquired two identical Dell 9010 Mid Tower computers from a business office upgrade (they were going to throw them out). Both of them have the same motherboard (00F82W). One of them works flawlessly. The other one had a corrupted BIOS. I tried flashing numerous main BIOS and EC files from the internet, but none of them worked. I decided to copy the main BIOS and EC from the working 9010 computer and successfully flashed the corrupted BIOS. This got the computer able to boot again and run norm...04-23-2025, 04:30 PM -
Hi everyone,
I'm in need of a BIOS file for a Dell Inspiron 16 5630. Unfortunately, I don't have access to the original BIOS file as this is for a replacement BIOS chip installation.
- Model: Dell Inspiron 16 5630
- MainBoard Part Number: 4550SC01C004
- Laptop Serial No: GKH3JX3
- DP/N: 0303KM
- QUAKE N RPL UMA CS MB
- 213251-2
- TMN0H$KB
Thanks -
The Dell Inspiron 3480 I own (the all in one, not the laptop) is not wanting to turn on at all. It goes right to a dell logo, but it stays there forever with no other information on the screen. Holding the automatic Bios repair key combo (ctrl+esc) that should let it read a recovery file off a USB drive gets stuck on a black screen and does nothing. No amount of resetting anything so far has worked, and Dell's own support downloads have not really helped. Ive tried another BIN file I found online using my CH341A, and this got me slightly more, that time it displayed a loading bar that never moved...
Leave a comment: