Urgently need this dump file KAWE0 LA-4431P REV: 1.0
Emachines e520 dump
Collapse
X
-
Re: Emachines e520 dump
make backup and try thisAttached Filesif you find these attachements useful please consider making a small donation to the site
Im Back... sort of...
-
Related Topics
Collapse
-
This specification for the ACER eMachines PT.NCAE2.071 can be useful for upgrading or repairing a desktop PC that is not working. As a community we are working through our specifications to add valuable data like the eMachines PT.NCAE2.071 boardview and eMachines PT.NCAE2.071 schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet,...09-12-2024, 03:36 PM
-
Acer eMachines E520 E720 Laptop Schematic
LA-4431P Rev 1.0...-
Channel: Schematics and Boardviews
10-31-2024, 03:44 AM -
-
Acer eMachines D520 D720 E520 E720 Boardview
LA-4431P...-
Channel: Schematics and Boardviews
10-26-2024, 02:21 AM -
-
by AhariHi all,
This is my first post here (I am very new to forums!) and I hope someone can help. I am looking for a full dump of the BIOS of a HP Proliant Microserver Gen 8 so that I can get this mini server running again. (BIOS version J06 2019-04-04, chip 25Q064A). I think my board was partially bricked after a failed BIOS update.
I got it second hand in this state and all the normal attempts at bios restoration have not worked. I have even desoldered the chip and tried to load the actual BIOS from HP, but it is missing some parts needed to boot the system.
I...-
Channel: BIOS & Schematic Requests!
-
-
by mkdjDear all,
I have a ASUS ZenBook UX480F with the following symptoms:
I suspect it is a BIOS issue. So I decided to try to clean the ME region. I followed the guide on win-raid, and I believe I have done everything correctly. My problem is: when I open the outimage.bin in ME Analyzer, it says that it is Extracted, and not Region, Extracted as it should be. Is it normal, or did I do something not correctly? This is my first experience editing BIOS files.
I would appreciate if someone could take time to explain the issue, so that I can learn. But I would...-
Channel: BIOS Requests ONLY!
-
- Loading...
- No more items.
Comment