Hello,
I'm looking for BIOS dump SAMSUNG NP905S3G (PETRA-13 BA41-02277A REV 1.0).
Can anyone help...?
Thanks.
I'm looking for BIOS dump SAMSUNG NP905S3G (PETRA-13 BA41-02277A REV 1.0).
Can anyone help...?
Thanks.
-
-
Re: Bios dump samsung np905s3g
try with this dump -
Re: Bios dump samsung np905s3g
Thanks sirComment
-
Re: Bios dump samsung np905s3g
i'm looking for bios for SAMSUNG NP300E5V ( LEOPARD14/15EXT RE; 1.0 )
Can anione help ?
thanks !
Comment
-
Re: Bios dump samsung np905s3g
Hi friends please i need bios for
Samsung NP300E5A - Scala3-15 Petronas-15 REV1.5
BA41-01762A HSt
07QA BA92-09555B
THANKSComment
-
Re: Bios dump samsung np905s3g
Hi friends please i need bios for
Samsung NP300E5A-A0HTR
Scala3-15 Petronas-15 REV1.5
BA41-01839A
THANKSComment
-
Re: Bios dump samsug petronas-13 rev 1.0
Comment
-
Re: Bios dump samsung np905s3g
Hi. I need bios for NP905S3G-K01PL
Version bios- P05RBVComment
-
Re: Bios dump samsung np905s3g
:Grupa: its ok 100% in NP905S3GComment
-
Bonjour,
je recherche un dump BIOS SAMSUNG NP905S3G-k04 (PETRA-13 BA41-02277A REV 1.1).
Quelqu'un peut-il m'aider...?
Merci.
Hello,
you are looking for and dump BIOS SAMSUNG NP905S3G-k04 (PETRA-13 BA41-02277A REV 1.1).
Can someone help me...?
Thank you.Comment
-
Due to a lack of donations, server free space at a critical level, and possible closure of Bios Requests all donations are welcome, click:
>>>>> https://www.badcaps.net/index.php?pageid=donate1 <<<<<
Every donation made will go towards server fees and maintenance costs.Comment
-
The Samsung S49CG934SU monitor does not power on - no LED indicator activity and no response to power button. However, when 21V power is connected, it immediately draws 0.8A of current with no display output. The motherboard processor gets warm, and there is continuous reading activity from the W25Q128BV BIOS chip.
Suspected Cause:
I suspect the BIOS may have been corrupted during a power interruption while updating the firmware. The official website provides firmware updates, but they can only be installed via USB flash drive.
Troubleshooting Attempts:
... -
Hi all,
My Samsung Galaxy Book 2 Pro 15.6-inch laptop has no display and won't boot.
The charging red LED lights up, but the charging screen doesn't show any indication.
When I press the power button, the blue LED cycles on and off three times, then the screen doesn't turn on, and the device won't boot.
(I've tried removing the battery and resetting the device, but the issue persists.)
NoteBook Model name : Samsung NT955XED-KK51G(Galaxy book2 pro, i5-1240p, 15.6inch AMOLED)
PCB model name : Venus2-15-5G(REV1.2), Venus2-15 ADL NPC
S/N : 5RNK9FFT70... -
Hi all,
This is my first post here (I am very new to forums!) and I hope someone can help. I am looking for a full dump of the BIOS of a HP Proliant Microserver Gen 8 so that I can get this mini server running again. (BIOS version J06 2019-04-04, chip 25Q064A). I think my board was partially bricked after a failed BIOS update.
I got it second hand in this state and all the normal attempts at bios restoration have not worked. I have even desoldered the chip and tried to load the actual BIOS from HP, but it is missing some parts needed to boot the system.
I... -
After installing Linux, I can no longer enter the BIOS of my Samsung Series 9 (NP900X3C) laptop. When pressing [F2] during boot I simply get a black screen. Same thing when pressing [F10] and choosing "Setup" from the "App Menu" tab. Apparently this is a relatively common issue with Samsung laptops of that generation, but unfortunately i haven't been able to resolve the issue (yet).
Things i've tried so far; reinstalled Windows 10, checked for redundant boot entries, tried to factory reset using the emergency keyhole, attempted to clear the NVRAM by physically...08-01-2025, 09:15 AM -
Dear all,
I have a ASUS ZenBook UX480F with the following symptoms:
I suspect it is a BIOS issue. So I decided to try to clean the ME region. I followed the guide on win-raid, and I believe I have done everything correctly. My problem is: when I open the outimage.bin in ME Analyzer, it says that it is Extracted, and not Region, Extracted as it should be. Is it normal, or did I do something not correctly? This is my first experience editing BIOS files.
I would appreciate if someone could take time to explain the issue, so that I can learn. But I would...
Comment