compaq tc4400 bios dump.

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • rickybucalan
    Badcaps Veteran
    • May 2013
    • 322
    • philippines

    #1

    compaq tc4400 bios dump.

    helllo guys.... i got here compaq tc4400 kindda old laptop. its turn on and off a few sec again n again. so i wondering its just a bios problem. i hoping anyone could help me for bios bin for this model.

    tnx in advance....
  • samuelnagy
    Member
    • Feb 2017
    • 16
    • Egypt

    #2
    Re: compaq tc4400 bios dump.

    I need this file too heh lol

    Comment

    • Djosla
      Badcaps Veteran
      • Dec 2012
      • 246
      • Montenegro

      #3
      Re: compaq tc4400 bios dump.

      Here you are:

      Attached Files

      Comment

      Related Topics

      Collapse

      • Habble7
        I need a BIOS dump for the Samsung S49CG934SU monitor
        by Habble7
        The Samsung S49CG934SU monitor does not power on - no LED indicator activity and no response to power button. However, when 21V power is connected, it immediately draws 0.8A of current with no display output. The motherboard processor gets warm, and there is continuous reading activity from the W25Q128BV BIOS chip.

        Suspected Cause:
        I suspect the BIOS may have been corrupted during a power interruption while updating the firmware. The official website provides firmware updates, but they can only be installed via USB flash drive.

        Troubleshooting Attempts:
        ...
        05-22-2025, 07:28 AM
      • DynaxSC
        MSI PRO B660M-G DDR4 - real bios dump from board needed (no stock bios)
        by DynaxSC
        Hi, I have an MSI PRO B660M-G DDR4 board with damaged BIOS and i need a bios dump from a real board, along with MAC, UUID and Serial Number info (eg. a BIOS screenshot and pictures from the board stickers).

        I need to reconstruct the bios on my board, based on another bios image form a real board - meaning a bios image containing MAC address, UUID and Serial number. A stock BIOS is not suffiecient, as it is impossible to discover where the MAC, UUID and SerialNumber are stored. Tried with a similar board, but there are too much differences, and the stock BIOS is missing a lot of...
        11-17-2023, 10:56 AM
      • MDSI
        HP OMEN 17-an012nf BIOS dump with EC (DAG3BAMBAF0 REV : F)
        by MDSI
        Hello,

        I'm requesting a full BIOS dump (including EC firmware) for an HP OMEN 17-an012nf laptop.

        Details:
        Model : HP OMEN 17-an012nf
        Motherboard Part Number : DAG3BAMBAF0 REV : F
        Serial Number (S/N) : 5CD7280D51
        BIOS chip : Winbond W25Q64VSIQ
        Programmer : EZP2023+
        Issue : The motherboard is not powering on. Only the 5V rail is present. The 3.3V rail is missing because EN1 on the SY8286B remains stuck at 0V. This signal is driven directly by the EC/SIO. I replaced the 3.3V regulator and confirmed it's working.

        I already...
        07-28-2025, 07:11 AM
      • DynaxSC
        Who has a MSI Z590 PRO WIFI - Need BIOS dump ?
        by DynaxSC
        Hi,

        I need a BIOS dump for MSI Z590 PRO WIFI from a real physical board, along with MAC address and serial no.

        It must be a dump from a physical board, as it contains personalized data eg. MAC Address, UUID, Serial no.

        I have a board which has lost the BIOS contents, I have the MAC and serial to this board, and need to insert it into the another BIOS image. To do it, I need to have a real image from a real board, as the images from the MSI site are without this data. The only way to find where MAC/UUID/Serial is located in the BIOS is to have a bios...
        11-06-2022, 05:22 PM
      • TacticalFahrrad
        [REQUEST] Fujitsu Lifebook E5513 – Full BIOS Dump Needed (.bin)
        by TacticalFahrrad
        Hi everyone,

        I'm trying to recover a Fujitsu Lifebook E5513 (most likely 2023 model) that was bricked during a BIOS update. The update was interrupted (probably due to power loss), and now the laptop is stuck in a boot loop showing "PBB rollback" / "SBB rollback" messages.
        BIOS access (F2) and Boot Menu (F12) are no longer possible – the system instantly reboots after the rollback messages.

        I extracted the official BIOS update package from Fujitsu (contains FJNB2FD.CAP, ~18.7 MB) and tried tools like UEFIExtract, but it seems to only contain...
        06-30-2025, 04:09 AM
      • Loading...
      • No more items.
      Working...