need bios bin file
-
-
Re: fujitsu SH560
can you read old bios and post here
and is it nvidia vga or not?Im Back... sort of...
-
Re: fujitsu SH560
inside have passworadComment
-
Re: fujitsu SH560
with nvidiaComment
-
Re: fujitsu SH560
fujitsu SH560 & sh760 CP462910-Z3 REV/LOT/G with nvida need biosLast edited by teqcom; 08-16-2016, 09:52 PM.Comment
-
Re: fujitsu SH560
thx a lotComment
-
Re: fujitsu SH560
with intel pleaseComment
-
Re: fujitsu SH560
fujitsu lifebook SH560
attached backup is locked,
looking for unlocked file
its intel with no graphics
please helpComment
-
Re: fujitsu SH560
Type in a wrong Password three times,
First password: 3hqgo3
Second password: jqw534
Third password: 0qww294e
now you should see a 5 (or 6)digit like 12345 or 5x4 digit System Disabled Code
or a hexadecimal code like 0C1B2D4E or AAAA-BBBB-CCCC-DEAD-BEEF
Post the code here,or try this tool -> https://www.badcaps.net/forum/showthread.php?t=79974 https://www.badcaps.net/forum/showthread.php?t=103526
.Last edited by SMDFlea; 10-27-2022, 04:33 AM.Comment
-
----------------------------------------------------------------------------------------------------------------------------------------------------------------------
Due to a lack of donations, server free space at a critical level, and possible closure of Bios Requests
all donations are welcome,
see the donate button at the bottom of the page, or
>>>>> click on this link to donate via PayPal. <<<<<
Every donation made will go towards server fees and maintenance costs.
----------------------------------------------------------------------------------------------------------------------------------------------------------------------Comment
-
How does one use the bin files to update the bios though?Comment
-
Need Clean BIOS/EC Bin File for Lenovo ThinkPad Yoga 11e - Stuck with 0275 Error CMS
Hello everyone,
I am attempting a repair on a Lenovo ThinkPad Yoga 11e that is currently stuck at boot with the error: "0275 error CMS" even after setup new bios battery and will not allow me to enter the BIOS/Setup.
This is a critical issue that I believe requires flashing the BIOS chip directly using a programmer (e.g., CH341A/RT809H), as standard software updates or resets are not possible.
I have opened the laptop and identified the main BIOS chip... -
Hi all,
My Samsung Galaxy Book 2 Pro 15.6-inch laptop has no display and won't boot.
The charging red LED lights up, but the charging screen doesn't show any indication.
When I press the power button, the blue LED cycles on and off three times, then the screen doesn't turn on, and the device won't boot.
(I've tried removing the battery and resetting the device, but the issue persists.)
NoteBook Model name : Samsung NT955XED-KK51G(Galaxy book2 pro, i5-1240p, 15.6inch AMOLED)
PCB model name : Venus2-15-5G(REV1.2), Venus2-15 ADL NPC
S/N : 5RNK9FFT70... -
Hello Everyone,
I have HUAWEI MateBook X Pro 2019 (MACH-WX9) whose BIOS got corrupted i beleive. I have acquired Ch341A SPI flasher to program the BIOS externally. I see that to program the BIOS, i need BIOS bin/hex file which i could use to reflash it externally via the flasher tool.
It seems like the support page of this model no longer exist: https://consumer.huawei.com/be/lapto...ro-2019/specs/
In the website, you can only see specs etc.
I have not tried to extract the BIOS dump yet as I want to see if there is any ray of sunshine... -
Hi everyone
I noticed on the Xgpro software the BIOS backup files have extra bytes at the end when reading some chips, this is because the Xgpro software also reads the OTP region of those flash chips, and by default will append that region to the saved file
Programmer models: XGecu TL866II Plus / T48 / T56 / T76
Example: GD25LQ128D (1.8V), IC size is listed as 0x1000000 Bytes (16777216 bytes) + 0xC00 bytes, those extra 0xC00 bytes will be appended to the end of the saved file by default, resulting in a file size of 16780288 bytes
There's also an extra OTP Secu.R... -
Hi,
I have a problem with the BIOS password on the Fujitsu Celsius R920 mentioned in the title. The method using the Fujitsu BIOS Unlocker does not work, and there are no jumpers on the motherboard either. Below is the dump.
Please let me know how to remove the password by modifying the BIOS, or send me an unlocked BIOS dump and I will adjust it myself....
Comment