HP Pavilion 15-EC10ΧΧΧΧ dag3hdmb9d0 rev:d, Bios Needed

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • lagouzas
    Nemesis3
    • Oct 2013
    • 28
    • Greece

    #1

    HP Pavilion 15-EC10ΧΧΧΧ dag3hdmb9d0 rev:d, Bios Needed

    Hello, Laptop froze and got stuck in a prepost situation. It cannot be updated through a USB flash although it gets the signal to try to update bios through USB.
    I ve read the Original Bios and I post it here. Bios chip seems ok.
    I also post the screen opening if anyone has seen something like that.
    There is a thread about Pavilion 15-EC20XXXX but with different mobo and Ryzen 5th instead of Ryzen 4th, I dont think I should try on this.​
    Attached Files
    Seing is Believing
  • SMDFlea
    Super Moderator
    • Jan 2018
    • 20709
    • UK

    #2
    Type the laptop serial number, full name and model etc.

    read the forum rules..https://www.badcaps.net/forum/troubl...before-posting

    All donations to badcaps are welcome, click on this link to donate. Thanks to all supporters

    Comment

    • lagouzas
      Nemesis3
      • Oct 2013
      • 28
      • Greece

      #3
      HP Pavilion 15 Gaming laptop
      Model: 15-ec1011nv
      SN: 5CD041JLW6
      MotherBoard Model: DAG3HDMB8D0 REV: D
      Seing is Believing

      Comment

      • hoaca388
        Badcaps
        • Jan 2022
        • 11653
        • Socialist Republic of Vietnam

        #4
        Originally posted by lagouzas
        HP Pavilion 15 Gaming laptop
        Model: 15-ec1011nv
        SN: 5CD041JLW6
        MotherBoard Model: DAG3HDMB8D0 REV: D
        HP Pavilion Gaming - 15-ec1011nv
        Attached Files


        ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
        Mọi khoản quyên góp cho badcaps đều được hoan nghênh, hãy nhấp vào liên kết này để quyên góp. Cảm ơn tất cả những người ủng hộ----------------------------------------------------------------------------------------------------------------------------------------------------------------

        Comment

        • lagouzas
          Nemesis3
          • Oct 2013
          • 28
          • Greece

          #5
          Thank you hoaca388 laptop recovered, the bios is working, although it left a message for manufacturer unlock mode that I cannot remove.
          Seing is Believing

          Comment

          • hoaca388
            Badcaps
            • Jan 2022
            • 11653
            • Socialist Republic of Vietnam

            #6
            Originally posted by lagouzas
            Thank you hoaca388 laptop recovered, the bios is working, although it left a message for manufacturer unlock mode that I cannot remove.
            Comes with a counter ?


            ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
            Mọi khoản quyên góp cho badcaps đều được hoan nghênh, hãy nhấp vào liên kết này để quyên góp. Cảm ơn tất cả những người ủng hộ----------------------------------------------------------------------------------------------------------------------------------------------------------------

            Comment

            • lagouzas
              Nemesis3
              • Oct 2013
              • 28
              • Greece

              #7
              Well yes the laptop boots normally after some kind of 5 seconds. I am just worried if it performs as if it was in normal bios mode or if the bios is easier to become corrupt again.
              Seing is Believing

              Comment

              • m1ch43lzm
                Badcaps Veteran
                • Mar 2019
                • 388
                • Peru

                #8
                Missing "MPMLock" at 0x7000, try this one, just in case I copied from 0x6E40-0x700F from your original BIOS to the bios posted by hoaca388
                This should clear the "Manufacturing Programming Mode"
                "Unlock" means you can edit the S/N, etc. with HP BCU, once its "Lock" that info cannot be changed with BCU
                Attached Files

                Comment

                Related Topics

                Collapse

                Working...