MSI GF65 MS-16W21 rev, 1.0 - Clean Me Bios please

[mavaro]

Hello,

After replacing the PCH bridge, no image - it is necessary to clear the region. Can anyone help? Attached is the bios

[shiyab]

Hello,

After replacing the PCH bridge, no image - it is necessary to clear the region. Can anyone help? Attached is the bios

need model

[SMDFlea]

Hello,

After replacing the PCH bridge, no image - it is necessary to clear the region. Can anyone help? Attached is the bios

Post the laptop serial number https://www.badcaps.net/forum/troubl...before-posting

Whenever the PCH is replaced the ME firmware must always be cleaned. There are some guides if you want to have a go at it yourself https://www.badcaps.net/forum/troubl...22#post1622422

If there is a full bios image at MSI support you don`t need to clean the ME as it will be clean and configured already, just copy any DMI info or windows key from your backup to the new image.

[mavaro]

I don't have the serial number, it's blurred on the case, the model is MSI GF65 THIN 10UE MS-16W2 MS-16W21 motherboard Intel 10gen, PCH: Intel HM470 SRJAU, motherboard: 16W21 rev. 1:0 i7-10750H RTX 3060

[noname2024]

I don't have the serial number, it's blurred on the case, the model is MSI GF65 THIN 10UE MS-16W2 MS-16W21 motherboard Intel 10gen, PCH: Intel HM470 SRJAU, motherboard: 16W21 rev. 1:0 i7-10750H RTX 3060

try

[teptronics]

Hi guys can somebody help me to retrieve EC bin file from this bios.
EC chip already damage and can't EC bin cant be extracted from there.
Thanks a lot. Orig BIOS dump attached.

MSI GF65
MS-16W21

[peste]

Hi guys can somebody help me to retrieve EC bin file from this bios.
EC chip already damage and can't EC bin cant be extracted from there.
Thanks a lot. Orig BIOS dump attached.

MSI GF65
MS-16W21

post S/N and try..

[teptronics]

post S/N and try..

Thanks again.

Update, already successfully flash EC using this BIN but machine not turning ON, led indicator will lit split seconds after pressing power button.
3.3v present on EC chip caps.
+3VALW and +5VALW also present on TPS51225c step down IC.
+5VSUS and +3VSUS is not present when power button is not press, (present when pressed) which I think normal on MSI GF65 laptop not sure though.

Orig bios bin file still attached to extract EC bin file. Original EC chip already burnt and cannot extract EC bin from there.

Model: MSI GF65 THIN
Board: MS-16W21
S/N: K2107N0134519

[peste]

Thanks again.

Update, already successfully flash EC using this BIN but machine not turning ON, led indicator will lit split seconds after pressing power button.
3.3v present on EC chip caps.
+3VALW and +5VALW also present on TPS51225c step down IC.
+5VSUS and +3VSUS is not present when power button is not press, (present when pressed) which I think normal on MSI GF65 laptop not sure though.

Orig bios bin file still attached to extract EC bin file. Original EC chip already burnt and cannot extract EC bin from there.

Model: MSI GF65 THIN
Board: MS-16W21
S/N: K2107N0134519

Bios and EC bios extracted from MSI website update for GF65 Thin 10UE..

[teptronics]

Bios and EC bios extracted from MSI website update for GF65 Thin 10UE..

Thank you, already tried flasing both EC and BIOS still same result.

What could be the possible issue?
Power led will just flash when pressing power button and board suddenly take 100mA current and back to zero for split second after pressing ON.

Thanks.

[Iamjay]

Hello all i have recently purchased a MSI laptop model number MS-16W2 with serial number K2109N0025403. this was a gift from my girlfriend and she is not very tech-savvy as she did not even turn on the laptop when she purchased the thing from the guy. I have tried to do all the things stated online to clear this password and I am hoping one of your brillant lads can help me get this computer up and running. i was an electrical engineer until 4 years ago when i was hit by a car on my motorcycle and I have some new metal in my arms and legs and a bit of a head injury so please be simple with bany help you can provide me. thanks for your time and i look forward to hearing back from you guys

[peste]

post merged..next time look for a thread with the name and model, motherboard model of the laptop, and post there, if you can't find it, then make a new thread..

[peste]

Hello all i have recently purchased a MSI laptop model number MS-16W2 with serial number K2109N0025403. this was a gift from my girlfriend and she is not very tech-savvy as she did not even turn on the laptop when she purchased the thing from the guy. I have tried to do all the things stated online to clear this password and I am hoping one of your brillant lads can help me get this computer up and running. i was an electrical engineer until 4 years ago when i was hit by a car on my motorcycle and I have some new metal in my arms and legs and a bit of a head injury so please be simple with bany help you can provide me. thanks for your time and i look forward to hearing back from you guys

post full name and model, etc.
post the contents of the bios chip even if it is corrupted..

[Carlos Simbaña]

Hello, could someone please remove the BIOS password from this BIN file?
MSI GF56 Thin 10UE
Motherboard: MS-16W21
Serial Number: K2103N0148752

[m1ch43lzm]

Hello, could someone please remove the BIOS password from this BIN file?
MSI GF56 Thin 10UE
Motherboard: MS-16W21
Serial Number: K2103N0148752

Pass

2008

[Carlos Simbaña]

Pass

2008

It's right, thank you so much!