my friend
CASPER MB55IN1-3 BİOS
mainboard.15BFQ1-011000
MB45II4.V.01
bios dump
thanks
CASPER MB55IN1-3 BİOS
mainboard.15BFQ1-011000
MB45II4.V.01
bios dump
thanks
-
-
Re: casper MB55IN1-3 bios
not sure if it is the right thing:
compare with old dump -
Re: casper MB55IN1-3 bios
thank you friendComment
-
Re: casper MB55IN1-3 bios
Thanks, helped me a lot!Comment
-
Re: casper MB55IN1-3 bios
thanksComment
-
-
Comment
-
-
Re: casper MB55IN1-3 bios
http://www.dosya.tc/server8/3ihr52/M...to_w8.rar.html
Throw files to usb memory. Turn on the computer by pressing Alt + Home + power.Comment
-
-
Re: casper MB55IN1-3 bios
Comment
-
-
-
Re: casper MB55IN1-3 bios
save my life thanksComment
-
Re: casper MB55IN1-3 bios
thankyouComment
-
Re: casper MB55IN1-3 bios
ThanksComment
-
Re: casper MB55IN1-3 bios
thanksComment
-
Re: casper MB55IN1-3 bios
ThankyouComment
-
Re: casper MB55IN1-3 bios
very good thank youComment
thanks
-
Hi all,
This is my first post here (I am very new to forums!) and I hope someone can help. I am looking for a full dump of the BIOS of a HP Proliant Microserver Gen 8 so that I can get this mini server running again. (BIOS version J06 2019-04-04, chip 25Q064A). I think my board was partially bricked after a failed BIOS update.
I got it second hand in this state and all the normal attempts at bios restoration have not worked. I have even desoldered the chip and tried to load the actual BIOS from HP, but it is missing some parts needed to boot the system.
I... -
Dear all,
I have a ASUS ZenBook UX480F with the following symptoms:
I suspect it is a BIOS issue. So I decided to try to clean the ME region. I followed the guide on win-raid, and I believe I have done everything correctly. My problem is: when I open the outimage.bin in ME Analyzer, it says that it is Extracted, and not Region, Extracted as it should be. Is it normal, or did I do something not correctly? This is my first experience editing BIOS files.
I would appreciate if someone could take time to explain the issue, so that I can learn. But I would... -
The Samsung S49CG934SU monitor does not power on - no LED indicator activity and no response to power button. However, when 21V power is connected, it immediately draws 0.8A of current with no display output. The motherboard processor gets warm, and there is continuous reading activity from the W25Q128BV BIOS chip.
Suspected Cause:
I suspect the BIOS may have been corrupted during a power interruption while updating the firmware. The official website provides firmware updates, but they can only be installed via USB flash drive.
Troubleshooting Attempts:
... -
Hello engineers 😀,
I’m kindly requesting a clean and unlocked BIOS dump for the following HP laptop, as it’s bricked after flashing SP152727. The system now keeps rebooting, and the original issue was an Administrator / Power-On Password that I can no longer access.😏
🔧 Device Info:
- Model: HP 15-da2007ne
- Product Number: 8XF55EA#ABV
- Serial Number: CND0338P0D
- CPU: Intel Celeron N4000
- EC/BIOS Chip: [Add chip number from the motherboard or BIOS chip]
💀 Problem:😅
- Device shows “Administrator Password”... -
Hi all,
My Samsung Galaxy Book 2 Pro 15.6-inch laptop has no display and won't boot.
The charging red LED lights up, but the charging screen doesn't show any indication.
When I press the power button, the blue LED cycles on and off three times, then the screen doesn't turn on, and the device won't boot.
(I've tried removing the battery and resetting the device, but the issue persists.)
NoteBook Model name : Samsung NT955XED-KK51G(Galaxy book2 pro, i5-1240p, 15.6inch AMOLED)
PCB model name : Venus2-15-5G(REV1.2), Venus2-15 ADL NPC
S/N : 5RNK9FFT70...
Comment