hp spectre x360 13-4129na blinking cap lock no post

[kalilinux25]

This might be a stupid question bud do I have to have the ssd installed in the machine after programming the bios chips

nope , if you can get to post the board your good to go , you might try finding a good working ram or try to dissemble the board try using external monitor and only board , ram and if you jumper the power button you can do it also to just isolate the probability of some hardware issue

[Billy1690]

Great idea I’ll try connecting it to the tv with a hdmi later and see if that works

[SMDFlea]

Great idea I’ll try connecting it to the tv with a hdmi later and see if that works

Your CPU is skylake. It can`t be the 1st bios as that has ME 10 firmware, or the last one as thats too big. 0804E and F have ME 11 firmware, so its one of those. The 5:3 error can sometimes be caused by loose ram slot pins,so check all those carefully.

[Billy1690]

No worries its onboard ram ill double check the solder joints on the ram later thanks again for all your advice ill go and put another donation in just now and ill keep you updated on how i get on with connecting to hdmi to tv and checking solder joints

[Billy1690]

Now i checked everything and tried all the files again olso checked with hdmi to tv i have another board doing the exact same thing 5x3 cap lock flashes the other board was working great until i accidentally knocked 2 caps off with the crocodile clip taking a coppy of the bios file i replaced the caps but same thing i managed to get a replacement board so these two boards are for experimenting i was looking to get one up and running for a spare but im running out of ideas

[Billy1690]

Im thinking its a hardware issue probably the onboard ram went bad with the wrong bios been flashed if thats possible

[Billy1690]

Does anyone know the number of the bios chip of the hp spectre x360 13-4129na as the numbers on my chip are gone I’ve ordered a different programmer and I’m looking to program a new chip I’m thinking the original chip could be faulty

[SMDFlea]

Does anyone know the number of the bios chip of the hp spectre x360 13-4129na as the numbers on my chip are gone I've ordered a different programmer and I'm looking to program a new chip I'm thinking the original chip could be faulty

There are 3 different bios chips listed in the motherboard schematic

EN25QH64-104HIP 1C7017
W25Q64FVSSIQ EF4017
GD25B64BSIGR C84017

And in the 0804E/F bios these chips are in the VSCC table

Flash chips in VSCC table:
EF4017 (Winbond W25Q64)
1C7017 (EON EN25QH64)
C84017 (GigaDevice GD25x64)

[Billy1690]

Smdflea thank you do you know where I can buy them from or do I get the from AliExpress

[SMDFlea]

Smdflea thank you do you know where I can buy them from or do I get the from AliExpress

Ali is cheapest. Buy W25Q64FVSSIQ or GD25B64BSIGR .

[Billy1690]

Fantastic buddy thanks again for your help I’ll go get them now 👍😉

[Billy1690]

SMDFlea i got the T48 programmer but got sent these W25Q64FVSSIG chips will they still do the job or does it have to be one of these W25Q64FVSSIQ / GD25B64BSIGR

[alihomee]

i am having same model withsame motherboard code....orignal file got password...i tried 2 fikles from this post...both work but product info missing and program manufacture mode is alwtas there...i attached orignal password protected file

[SMDFlea]

i am having same model withsame motherboard code....orignal file got password...i tried 2 fikles from this post...both work but product info missing and program manufacture mode is alwtas there...i attached orignal password protected file

This thread is for the specific model number in the thread title 13-4129na is yours the same model ?.There is no motherboard number in the thread title. If yours isn`t the 13-4129na then go find a thread with the motherboard number in the thread title or find a thread for your specific model, if you can`t find one then start a new thread, and include the elusive serial number and other info that you always forget to post....

[alihomee]

This thread is for the specific model number in the thread title 13-4129na is yours the same model ?.There is no motherboard number in the thread title. If yours isn`t the 13-4129na then go find a thread with the motherboard number in the thread title or find a thread for your specific model, if you can`t find one then start a new thread, and include the elusive serial number and other info that you always forget to post....

yes my motherboard is same as provided by billy1690....and it is DAY0DEMBAB0 with model:13-4129TU and my serial num is: 5CD6217ZD9....i just wana remove password fron ori file...in tried with RC unlocker and HP unlock tool also but it show error contant missing....

[SMDFlea]

yes my motherboard is same as provided by billy1690....and it is DAY0DEMBAB0 with model:13-4129TU and my serial num is: 5CD6217ZD9....i just wana remove password fron ori file...in tried with RC unlocker and HP unlock tool also but it show error contant missing....

Start a new thread.. .The unlockers won`t work ,the consumer machines have an Insyde bios, business machines have AMI bios

[m1ch43lzm]

HP is starting to delete all info for these models previous to 2015, found the HP Spectre 13-4000 x360 drivers support page but not the specific 13-4129na page, it may not last long
SMDFlea on HP the last digits don't matter... same laptop just different specs/region

https://support.hp.com/au-en/drivers...ble-pc/7527520

Reupload BIOS extracted from https://ftp.hp.com/pub/softpaq/sp101...0/sp101310.exe (HP still keeps the softpaqs but deletes the support pages)

BIOS Version: F.54, BID: 0804F, 0804E, 0802D, 08035