Is there a solution to the HP 440 G7 EndPoint Security Controller Problem?
HP 440 G7 EndPoint Security Controller Problem
Collapse
X
-
Hi guys,
I'm having a Probook 440 G7 with the infamous "endpoint security controller" message. Hope somebody can help. Flashing a clean BIOS alone does not help, the message remains so apparantly it needs to be patched like some other models.
Details:
Probook 440 G7
Mobo model: DA0X8MMB6D0 rev: D
Serial number: 5CD034LDWB
The orignal dumps are attachted.
Thanks!Attached Filesif you find these attachements useful please consider making a small donation to the site
-
XXXHi guys,
I'm having a Probook 440 G7 with the infamous "endpoint security controller" message. Hope somebody can help. Flashing a clean BIOS alone does not help, the message remains so apparantly it needs to be patched like some other models.
Details:
Probook 440 G7
Mobo model: DA0X8MMB6D0 rev: D
Serial number: 5CD034LDWB
The orignal dumps are attachted.
Thanks!Attached Filesif you find these attachements useful please consider making a small donation to the site
↵
Any donations to badcaps are welcome, click this link to donate . Thanks to all the supporters
https://www.badcaps.net/donateComment
-
Thanks Hoaca! Just flashed it, but unfortunately the annoying message remains
I tested twice just to be sure. Also programmed back the DMI data if that would make any difference but it did not. Do you have another clue?
Comment
-
AgainAttached Filesif you find these attachements useful please consider making a small donation to the site
↵
Any donations to badcaps are welcome, click this link to donate . Thanks to all the supporters
https://www.badcaps.net/donateComment
-
Hi guys,
I'm having a Probook 440 G7 with the infamous "endpoint security controller" message. Hope somebody can help. Flashing a clean BIOS alone does not help, the message remains so apparantly it needs to be patched like some other models.
Details:
Probook 440 G7
Mobo model: DA0X8MMB6D0 rev: D
Serial number: 5CD043C3VJ
The orignal dumps are attachted.
Thanks!
Attached Files
Attached Filesif you find these attachements useful please consider making a small donation to the site
Comment
-
# 5Hi guys,
I'm having a Probook 440 G7 with the infamous "endpoint security controller" message. Hope somebody can help. Flashing a clean BIOS alone does not help, the message remains so apparantly it needs to be patched like some other models.
Details:
Probook 440 G7
Mobo model: DA0X8MMB6D0 rev: D
Serial number: 5CD043C3VJ
The orignal dumps are attachted.
Thanks!
Attached Files↵
Any donations to badcaps are welcome, click this link to donate . Thanks to all the supporters
https://www.badcaps.net/donateComment
Related Topics
Collapse
-
by kolebbkHi, I have a problem with my HP EliteDesk 705 G5 Small Form Factor computer on amd . Standard corrupted bios probably corrupted during the update. I have uploaded a clean dump from the manufacturer's website with the latest version but when I turn it on a message appears :
HP Endpoint Security Controller problem
there is a problem with the hp endpoint security controller on the unit
I tried restoring the bios security to factory defaults after the first switch-on because this helps with intel-based laptops. Here unfortunately this did not help. Does anyone have...-
Channel: BIOS & Schematic Requests!
-
-
by fede77Notebook HP ProBook 450 G8
ProdID 2K8L1LT#AC8
Mother: DAX8QAMB8D0 REV D
The device had bootloop issues. I reprogrammed the EC BIOS and the main BIOS, extracted from an HP 440 G8 with the same motherboard, and I was able to start the device. However, every time I turn it on, I get the error 'There is a problem with the HP Endpoint Security Controller in the unit.' I tried disabling several security options in the BIOS, but the error still appears. Additionally, when I attempt to update the BIOS, both BIOS chips get corrupted again....03-10-2025, 07:12 AM -
by lamondeHi! Please help with Endpoint Security Controller Problem, sending old not working dumps. Thankyou
and there is no soud after flashing new bios, may be have some solutions?
ProdID: 4YD62AV
SN: 2TK9500V8X...-
Channel: BIOS Requests ONLY!
-
-
by biednybelferAfter removing the password I get an error "There is a problem with hp endpoint security controller on the unit". I read that I need a modified BIOS. There are 3 ISP on my board.
Mainbard model:6050A3044201-MB-A01 (A1)
Serial Number: 5CG0275ZLV
(I'm not allowed to upload files with the extension bin, so I upload zip)...-
Channel: BIOS Requests ONLY!
-
-
by Voyager65Hi all,
I got a used HP and see this well known HP Endpoint Security Problem Screen. Someone seems to have removed the password and reflashed the bios with (maybe) a wrong serial etc.. I was able to read and write with my programmer a new bios onto it - same problem. I tried a downgrade, same.
I did password removal wir rcunlocker on several other machines without any problem. But this one is/was killed before. Appreciate any help.
SN: 8CC1120Z0V
PN: 8WY18AV
Bios Dump:
Thanks a lot...-
Channel: BIOS & Schematic Requests!
-
- Loading...
- No more items.
Comment