BIOS Request for HP Pavilion 15-bc009nm

[Hombre]

Model number: 15-bc009nm
Serial number: 5CD64518KV
Motherboard: DAG35AMB8E0 Rev:E

Laptop had dead SR2C4 chipset, replaced it and now the charger is working and on start both fans start to spin, caps lock blinking 5x long and 3x fast, screen is black.
U5 that was installed was 25Q16 and according to schematics it should be 25Q64, but i am not sure how that happened, i am not the first one diving into it.
Tried some bins for some similar models but it did not work out, and for this specific model could not find any dump.
I tried to etxract the bios from HP site, but was not able to do it ;(

I tried to make an dump from EC - not sure if it is ok, but it should be, you can find it attached.

I assume it's BIOS issue, cut could be hardware also, although i have all necessary voltages.

[hoaca388]

Model number: 15-bc009nm
Serial number: 5CD64518KV
Motherboard: DAG35AMB8E0 Rev:E

Laptop had dead SR2C4 chipset, replaced it and now the charger is working and on start both fans start to spin, caps lock blinking 5x long and 3x fast, screen is black.
U5 that was installed was 25Q16 and according to schematics it should be 25Q64, but i am not sure how that happened, i am not the first one diving into it.
Tried some bins for some similar models but it did not work out, and for this specific model could not find any dump.
I tried to etxract the bios from HP site, but was not able to do it ;(

I tried to make an dump from EC - not sure if it is ok, but it should be, you can find it attached.

I assume it's BIOS issue, cut could be hardware also, although i have all necessary voltages.

HP Pavilion 15-bc009nm

[SMDFlea]

15-bc009nm product spec - https://support.hp.com/gb-en/document/c05232416 . i5-6300HQ Skylake H .

SKYLAKE H ,BID0820D ,BID0825F ,BID08294 - https://www.badcaps.net/forum/troubl...0-rev-d-e-bios
Your BID must be 0820D as Hoaca extractd those 3 bios from the HP bios update .

[Hombre]

Thanks, tried it in combination with the 0820D EC that you posted on another thread and it behaves the same, no video, fans spinning, and caps lock blinks 5x long 3x short.
And this 0820D in combination with my EC backup starts the fans, no video but no blinking from caps lock.
something is missing/wrong from hardware side possibly - maybe i should try to reflow chipset.

Thanks

[SMDFlea]

Check the ram slot pins carefully for any loose ones and resolder them.