Hey All, I have loads off hps all with passwords and custom splash screens is there anyway to remove the splash from bios dump well am doing the passwords on them or anyway to remove the custom splash atall
-
-
after you remove password go in Boot Options and uncheck Custom logo----------------------------------------------------------------------------------------------------------------------------------------------------------------------
https://www.badcaps.net/donate/
---------------------------------------------------------------------------------------------------------------------------------------------------------------------- -
Comment
-
HP BCU for older models,don`t know about newer ones - https://h30434.www3.hp.com/t5/Notebo...g/td-p/5498233Comment
-
first install this application from hp.
2 open powershell with admin rights and write this
1} Set-ExecutionPolicy RemoteSigned
2} PS C:\> Clear-HPFirmwareBootLogo
Done!Comment
-
2nd cmd dont seem to work just spits out red error
Update : Got it working had to mess around with powershell settingsLast edited by CammyTier1; 11-28-2023, 03:34 AM.
-
-
Hi, does anyone know how to remove a customised splash screen logo from the bios of a Lenovo ThinkCentre M90a all-in-one please?
-
Hi, I'm stuck in removing custom logo from T590 and replace it with original one. I did try to remove it with bios update but no joy. Also i did try with LMU but there is no option for replacing logo. Any ideas are welcome, thank you! -
Problem
This is an LG edge LED lit LCD Display. The LEDs are on the bottom edge of the display. There are 2 bars (left and right) Each bar has many LEDs and a 6 pin connector. Each pin drive several LEDs thus is the highest current flow / heat junction. The weak lead free solder gradually fails with thermal expansion/contraction cycling and increases resistance. PSU will compensate up to a point, then when the current is too high, PSU just shut down the backlight causing a dark display. I have even seen one which the connector just fell off as solder points became completely detached.... -
I have a Acer laptop running win 10 . Every time I boot my laptop I have to see a image / splash screen showing pub of the first owner after this logo acer appears.
So how to remove it ! by soft or dumb the bios!
i try HackBGRT tool but didn't help , it's only for changing win logo..
Any suggestions please04-02-2022, 03:42 AM -
[REQUEST] ThinkPad T14 Gen 1 (20S1) - Custom Boot Logo Modification
Hello everyone!
I hope this is the right section for this request. I'm looking for help to modify the boot logo on my ThinkPad T14 Gen 1.
System Information:- Model: Lenovo ThinkPad T14 Gen 1
- Machine Type: 20S1S4E600 (Intel i7 variant)
- Current BIOS: N2XET42W (1.33) - Latest version
- BIOS File: n2xuj25w.exe (12.98 MB) - Downloaded from Lenovo support
Replace the default "LENOVO" boot logo with a custom image during POST.
🔧 What I've tried:- [
Comment