Hi, I'm stuck in removing custom logo from T590 and replace it with original one. I did try to remove it with bios update but no joy. Also i did try with LMU but there is no option for replacing logo. Any ideas are welcome, thank you!
-
----------------------------------------------------------------------------------------------------------------------------------------------------------------------
https://www.badcaps.net/donate/
---------------------------------------------------------------------------------------------------------------------------------------------------------------------- -
Re: How do I remove custom logo from T590?
Solved, I just had to read carefully pop-up messages while bios update. It was a window warning me that it has a custom logo and if I want to remove it and I clicked "No". Thank you, topic closed.----------------------------------------------------------------------------------------------------------------------------------------------------------------------
https://www.badcaps.net/donate/
---------------------------------------------------------------------------------------------------------------------------------------------------------------------- -
Re: How do I remove custom logo from T590?
For others with same problem: download bios update for your model, check EXTRACT ONLY and not update bios, go to folder where was extracted and launch WINUPTP.exe. It will pop-up a windows saying you have a cusotom logo and if you want to remove it or not and click Yes.----------------------------------------------------------------------------------------------------------------------------------------------------------------------
https://www.badcaps.net/donate/
----------------------------------------------------------------------------------------------------------------------------------------------------------------------Comment
-
[REQUEST] ThinkPad T14 Gen 1 (20S1) - Custom Boot Logo Modification
Hello everyone!
I hope this is the right section for this request. I'm looking for help to modify the boot logo on my ThinkPad T14 Gen 1.
System Information:- Model: Lenovo ThinkPad T14 Gen 1
- Machine Type: 20S1S4E600 (Intel i7 variant)
- Current BIOS: N2XET42W (1.33) - Latest version
- BIOS File: n2xuj25w.exe (12.98 MB) - Downloaded from Lenovo support
Replace the default "LENOVO" boot logo with a custom image during POST.
🔧 What I've tried:- [
-
Hi, does anyone know how to remove a customised splash screen logo from the bios of a Lenovo ThinkCentre M90a all-in-one please?
-
Hey All, I have loads off hps all with passwords and custom splash screens is there anyway to remove the splash from bios dump well am doing the passwords on them or anyway to remove the custom splash atall...
-
Problem
This is an LG edge LED lit LCD Display. The LEDs are on the bottom edge of the display. There are 2 bars (left and right) Each bar has many LEDs and a 6 pin connector. Each pin drive several LEDs thus is the highest current flow / heat junction. The weak lead free solder gradually fails with thermal expansion/contraction cycling and increases resistance. PSU will compensate up to a point, then when the current is too high, PSU just shut down the backlight causing a dark display. I have even seen one which the connector just fell off as solder points became completely detached.... -
Hi
I have here a Philips 47PFS7509/12 LCD TV which came to me with a weird problem : without signal i could access menu, make a factory reset, access menus, etc.
When i applied cable signal to check image, i had normal picture, but TV was restarting.
I downloaded original firmware and applied the update, but the problem remained.
From a colleague i received a "factory package software" which is a lot bigger.
I made another firmware update, but still did not solve the problem.
Somewhere on the way the error got worse, because at the moment the...
Comment