my friends
fujitsu siemens amilo pa 3553
model.ms2242
amd processor
ati graphics card
thanks
fujitsu siemens amilo pa 3553
model.ms2242
amd processor
ati graphics card
thanks
-
I am looking for Fujitsu Amilo Pro V2030D BIOS DUMP.
I downloaded latest BIOS from Fujitsu (for V2030) and flashed it as per instructions. After doing so the laptop has become unstable, I'm getting lots of BSODs, CRC errors, etc, and I didn't make a backup.
I am unsure what difference, if any is between the V2030 and V2030D, but mine is the V2030D.
The BIOS I flashed was 1.0H.
Thank you09-29-2025, 11:43 PM -
Hi everyone,
I'm trying to recover a Fujitsu Lifebook E5513 (most likely 2023 model) that was bricked during a BIOS update. The update was interrupted (probably due to power loss), and now the laptop is stuck in a boot loop showing "PBB rollback" / "SBB rollback" messages.
BIOS access (F2) and Boot Menu (F12) are no longer possible – the system instantly reboots after the rollback messages.
I extracted the official BIOS update package from Fujitsu (contains FJNB2FD.CAP, ~18.7 MB) and tried tools like UEFIExtract, but it seems to only contain... -
Hello everyone,
I need a BIOS dump file for my Fujitsu LIFEBOOK AH47/J laptop.
Motherboard model: DAFH6BMB6A0
The system BIOS got corrupted and now the laptop powers on but does not boot.
I already tried the official Fujitsu support site, but the downloadable BIOS is only in .exe format and does not contain the raw .bin file needed for programming the BIOS chip directly with a programmer (CH341A).
If anyone has a working BIOS dump (.bin) for this model, please share it.
Thanks in advance!... -
Hi all,
This is my first post here (I am very new to forums!) and I hope someone can help. I am looking for a full dump of the BIOS of a HP Proliant Microserver Gen 8 so that I can get this mini server running again. (BIOS version J06 2019-04-04, chip 25Q064A). I think my board was partially bricked after a failed BIOS update.
I got it second hand in this state and all the normal attempts at bios restoration have not worked. I have even desoldered the chip and tried to load the actual BIOS from HP, but it is missing some parts needed to boot the system.
I... -
The Samsung S49CG934SU monitor does not power on - no LED indicator activity and no response to power button. However, when 21V power is connected, it immediately draws 0.8A of current with no display output. The motherboard processor gets warm, and there is continuous reading activity from the W25Q128BV BIOS chip.
Suspected Cause:
I suspect the BIOS may have been corrupted during a power interruption while updating the firmware. The official website provides firmware updates, but they can only be installed via USB flash drive.
Troubleshooting Attempts:
...
Comment