HP Elitebook 645 G10 BAD BIOS

[bilelfodil]

NEED CLEAR PASSWORD HP 645 G10
NUM DE SERIE : 5CD4012HLY

[peste]

I am new here, thanks for helping.. Where i can find other information?

Serial : 2TK34305V7
SKU: 79B75AV
Ctnumber: PSKLV038JINOQW
Feature byte: 476J656b7B7H7M7Q7W7m7s8uaBapaqauawcAeMf
PguhKhkjhk8mEmVn7nWp9pDpapnpqprqMqz.Q4

you need an SPI programmer...here is a video for example..https://www.youtube.com/watch?v=DWWi...nnel=ThisIsHow

[kuksi]

post S/N, full name and model, motherboard model, product number,etc.
post the original contents of the bios chip..

I am new here, thanks for helping.. Where i can find other information?

Serial : 2TK34305V7
SKU: 79B75AV
Ctnumber: PSKLV038JINOQW
Feature byte: 476J656b7B7H7M7Q7W7m7s8uaBapaqauawcAeMf
PguhKhkjhk8mEmVn7nWp9pDpapnpqprqMqz.Q4

[peste]

post merged..

[peste]

Hello badcaps forum ! Please someone help me to remove bios password from HP 645 g10

post S/N, full name and model, motherboard model, product number,etc.

post the original contents of the bios chip..

[kuksi]

Hello badcaps forum ! Please someone help me to remove bios password from HP 645 g10

[BGinvestments]

Hi! Can anyone help me to unlock a HP EliteBook 645 G10
S/N 5CD4058S75
This is the EC File

EDIT: i was wrong posting the EC File, this is the MAIN BIOS file

[BGinvestments]

Hi! Can anyone help me to unlock a HP EliteBook 645 G10
S/N 5CD4058S75
This is the EC File

[madjid911]

Send to you, try !!

Thank you very much it works

[minhdigital]

Can anyone help me to unlock hp EliteBook 645 G10
motherboard : DA0X9TMB8D1 REV D

SerialNumber:5CD3284DW4
ProductConfigurationID:75C20AV
Board CT Number:PSBYR058JIB06N
Name:HP EliteBook
ProductName:HP EliteBook 645 14 inch G10 Notebook PC
BuildID:23WWKNBZ601#SABY#DABY

Send to you, try !!

[minhdigital]

that's exactly what I did, but it starts without taking the modification, now it doesn't want to start normally, I must have done something stupid, it starts displays a hp sure smart recovery whitepaper error and turns off, I reflashed the original bios and it does exactly the same thing to me, it doesn't even boot on Windows anymore, it turns off after the error, can you clean the original bios please, I don't know what to do anymore

Send to you, try again !!

[volinakis]

that's exactly what I did, ....

sure, I can see from your printscreen ...

[madjid911]

rename config.tkt (???) or read again with BCU bios settings and name your file config.txt Open file with notepad and edit it with name, CT, etc - provided by minhdigital move * from Manufacturing Programming Mode to lock - as minhdigital indicate in Note.txt, save as config1.txt (save it in Documents and move it in BCU folder) and use BCU to write file : biosconfigutility[space]/set:config1.txt

that's exactly what I did, but it starts without taking the modification, now it doesn't want to start normally, I must have done something stupid, it starts displays a hp sure smart recovery whitepaper error and turns off, I reflashed the original bios and it does exactly the same thing to me, it doesn't even boot on Windows anymore, it turns off after the error, can you clean the original bios please, I don't know what to do anymore

[volinakis]

I would like to know why I always have the same problem, I tried several times, each time when restarting I always have the manufacturing message followed by a blank page indicating a product information not valid error. When I reopen the config file to redo it I realize that it is always on *unlock, so it is never saved

rename config.tkt (???) or read again with BCU bios settings and name your file config.txt Open file with notepad and edit it with name, CT, etc - provided by minhdigital move * from Manufacturing Programming Mode to lock - as minhdigital indicate in Note.txt, save as config1.txt (save it in Documents and move it in BCU folder) and use BCU to write file : biosconfigutility[space]/set:config1.txt

[keczuk]

Can anyone help me to unlock hp EliteBook 645 G10
motherboard : DA0X9TMB8D1 REV D

SerialNumber:5CD3284DW4
ProductConfigurationID:75C20AV
Board CT Number:PSBYR058JIB06N
Name:HP EliteBook
ProductName:HP EliteBook 645 14 inch G10 Notebook PC
BuildID:23WWKNBZ601#SABY#DABY

[madjid911]

Yes I tried but it doesn't work after restarting I still have the manufacturing

I tried to do it myself in CMD it tells me that it will be corrected but after restarting it remains the same

I would like to know why I always have the same problem, I tried several times, each time when restarting I always have the manufacturing message followed by a blank page indicating a product information not valid error. When I reopen the config file to redo it I realize that it is always on *unlock, so it is never saved

[madjid911]

Run write.bat in windows

Yes I tried but it doesn't work after restarting I still have the manufacturing

I tried to do it myself in CMD it tells me that it will be corrected but after restarting it remains the same

[minhdigital]

I tried with the software with CMD and with your file writing file but I am still in manufacturing mode

Run write.bat in windows

[madjid911]

Send to you, try !!

I tried with the software with CMD and with your file writing file but I am still in manufacturing mode

[madjid911]

Send to you, try !!

Hello, there is no more password but there is still the manufacturing block